[Wed Oct 26 08:13:39 2011] Detection parameters:
  Position = (309.4, 860.6) = 0 25 2.56 64 11 9.5
  Extent = 0.5" x 0.5", rotation angle = 144 degrees
  Source counts = 988.9 +/- 61.8
  Background counts = 2832.1
  Rate = 0.009 +/- 0.0006

[Wed Oct 26 08:15:10 2011] Off-axis axis estimate = 3.41'
[Wed Oct 26 08:31:19 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:31:19 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Wed Oct 26 08:31:19 2011] source mask rpix=1.4, npix_max = 13, mask sum = 9, frac = 0.650
[Wed Oct 26 08:31:19 2011] Giving source the simple spatial ID 72 for pass 0, mean size = 0.67"
[Wed Oct 26 08:31:21 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src72.ximg exists
[Wed Oct 26 08:31:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src72.csv
[Wed Oct 26 08:31:21 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src72_1.ximg exists
[Wed Oct 26 08:31:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src72.csv
[Wed Oct 26 08:31:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:31:23 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_tfrozen_src72.ximg exists
[Wed Oct 26 08:31:23 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_tfrozen_src72_1.ximg exists
[Wed Oct 26 08:31:23 2011] Fit fullrun_ccd3_acisf10097_pi14-548_cl_pass0_tfrozen_src72 appears to have run properly
[Wed Oct 26 08:32:49 2011] Source 100 is offset by -4.994969 and 5.058446 pixels which is larger than
2 X fitted extent = 0.680402 x 0.680402, not incorporating fit results
[Wed Oct 26 08:32:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:32:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:32:49 2011] Assessing source extent using major
[Wed Oct 26 08:32:49 2011] Source does appear to be extended
[Wed Oct 26 08:32:49 2011] Computing asymmetry using major and minor axis, asym = 1.05
[Wed Oct 26 08:34:43 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:34:43 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Wed Oct 26 08:34:43 2011] source mask rpix=1.4, npix_max = 13, mask sum = 9, frac = 0.650
[Wed Oct 26 08:34:43 2011] Giving source the simple spatial ID 71 for pass 1, mean size = 0.67"
[Wed Oct 26 08:34:47 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src71.ximg exists
[Wed Oct 26 08:34:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src71.csv
[Wed Oct 26 08:34:47 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src71_1.ximg exists
[Wed Oct 26 08:34:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src71.csv
[Wed Oct 26 08:34:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:34:49 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_tfrozen_src71.ximg exists
[Wed Oct 26 08:34:49 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_tfrozen_src71_1.ximg exists
[Wed Oct 26 08:34:49 2011] Fit fullrun_ccd3_acisf10097_pi14-548_cl_pass1_tfrozen_src71 appears to have run properly
[Wed Oct 26 08:36:08 2011] Source 100 is offset by 6.643364 and 2.420112 pixels which is larger than
2 X fitted extent = 2.296537 x 2.296537, not incorporating fit results
[Wed Oct 26 08:36:08 2011] Spatial fit model total counts = 6300.010000, observed total counts = 6273.000000
[Wed Oct 26 08:36:08 2011] Offset between fit and detection position for source 100 = 2.773942 pixels
[Wed Oct 26 08:36:08 2011] 6171.301000 total counts/ 5193.800000 bgd. counts: snr = 13.563588
Spatial fit parameters:
  Offset between fit and detection position for source 100 = 2.773942 pixels
  Position = (308.4, 863.2) = 0 25 2.68 64 11 10.5
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 977.5 +/- 78.6
  Background counts = 5193.8
  Rate = 0.009 +/- 0.0007
[Wed Oct 26 08:36:08 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:36:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:36:08 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:36:08 2011] Source does appear to be extended
[Wed Oct 26 08:36:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 09:09:27 2011] Not overwriting source region fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100_src.reg
[Wed Oct 26 09:09:27 2011] Extracting stamp from image fullrun_ccd3_acisf10097_pi14-548_cl_sm2.00.img.gz, (240, 795) - (377, 932)
[Wed Oct 26 09:09:27 2011] Writing fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100.gif
[Wed Oct 26 09:13:38 2011] ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100_src.evt and ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100_bgd.evt exist, delete to re-create
[Wed Oct 26 09:13:38 2011] Size of ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100_src.evt.gz[events] = 10131 counts
[Wed Oct 26 09:13:38 2011] Mean chipx,y = (540.32, 939.43)
[Wed Oct 26 09:13:38 2011] Mean tdetx,y = (4192.57, 3601.32)
[Wed Oct 26 09:13:38 2011] chipx,y range = (510.00-570.00, 907.00-969.00)
[Wed Oct 26 09:13:38 2011] Size of ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100_bgd.evt.gz[events] = 26806 counts
[Wed Oct 26 09:13:38 2011] ../../acisf10097/products/images/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100_src.img and ../../acisf10097/products/images/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100_bgd.img exist, delete to re-create
[Wed Oct 26 09:13:38 2011] ../../acisf10097/products/spectra/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100_src.pi and ../../acisf10097/products/spectra/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100_bgd.pi exist, delete to re-create
[Wed Oct 26 09:13:42 2011] ../../acisf10097/products/lightcurves/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100_src.lc and ../../acisf10097/products/lightcurves/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100_bgd.lc exist, delete to re-create
[Wed Oct 26 11:23:46 2011] Keeping rmf generated by specextract
[Wed Oct 26 11:23:46 2011] 183.803
[Wed Oct 26 11:25:33 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:25:33 2011] Error reading totcts from fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100_src.pi.gz
[Wed Oct 26 11:25:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:25:54 2011] Using photon index=1.80, rate=0.0091, arf fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src100.arf
[Wed Oct 26 11:25:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:25:54 2011] Updating source flux to 1.4e-13
[Wed Oct 26 11:57:06 2011] Flag b found in src. 100 procflags, skipping spectral fitting