[Wed Oct 26 08:12:12 2011] Detection parameters:
  Position = (636.8, 426.5) = 0 25 48.11 64 11 20.2
  Extent = 0.7" x 0.7", rotation angle = 153 degrees
  Source counts = 643.6 +/- 30.2
  Background counts = 270.4
  Rate = 0.006 +/- 0.0003

[Wed Oct 26 08:13:26 2011] Off-axis axis estimate = 4.00'
[Wed Oct 26 08:31:12 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:31:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 08:31:12 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Wed Oct 26 08:31:12 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.046
[Wed Oct 26 08:31:12 2011] Giving source the simple spatial ID 53 for pass 0, mean size = 0.83"
[Wed Oct 26 08:31:15 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src53.ximg exists
[Wed Oct 26 08:31:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src53.csv
[Wed Oct 26 08:31:15 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src53_1.ximg exists
[Wed Oct 26 08:31:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src53.csv
[Wed Oct 26 08:31:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:31:17 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass0_tfrozen_src53.ximg exists
[Wed Oct 26 08:31:17 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass0_tfrozen_src53_1.ximg exists
[Wed Oct 26 08:31:17 2011] Fit fullrun_ccd2_acisf10097_pi14-548_cl_pass0_tfrozen_src53 appears to have run properly
[Wed Oct 26 08:32:34 2011] Spatial fit model total counts = 1461.910000, observed total counts = 1490.000000
[Wed Oct 26 08:32:34 2011] Offset between fit and detection position for source 26 = 1.376520 pixels
[Wed Oct 26 08:32:34 2011] 1438.127000 total counts/ 887.301000 bgd. counts: snr = 18.491790
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.376520 pixels
  Position = (637.5, 427.6) = 0 25 48.09 64 11 20.5
  Extent = 1.6 (1.6-1.7)", rotation angle = 0
  Source counts = 550.8 +/- 37.9
  Background counts = 887.3
  Rate = 0.005 +/- 0.0004
[Wed Oct 26 08:32:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:32:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:32:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:32:34 2011] Source does appear to be extended
[Wed Oct 26 08:32:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:34:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:34:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 08:34:35 2011] Initial guess for spatial extent in simple fitting = 1.62"
[Wed Oct 26 08:34:35 2011] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.847
[Wed Oct 26 08:34:35 2011] Giving source the simple spatial ID 53 for pass 1, mean size = 1.62"
[Wed Oct 26 08:34:40 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src53.ximg exists
[Wed Oct 26 08:34:40 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src53_1.ximg exists
[Wed Oct 26 08:34:40 2011] Fit fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src53 appears to have run properly
[Wed Oct 26 08:34:42 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass1_tfrozen_src53.ximg exists
[Wed Oct 26 08:34:42 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass1_tfrozen_src53_1.ximg exists
[Wed Oct 26 08:34:42 2011] Fit fullrun_ccd2_acisf10097_pi14-548_cl_pass1_tfrozen_src53 appears to have run properly
[Wed Oct 26 08:35:54 2011] Warning, spatial fit 53 centroid is now closest to src. 540
[Wed Oct 26 08:35:54 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:35:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:35:54 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:35:54 2011] Source does appear to be extended
[Wed Oct 26 08:35:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:54:49 2011] Not overwriting source region fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26_src.reg
[Wed Oct 26 08:54:49 2011] Extracting stamp from image fullrun_ccd2_acisf10097_pi14-548_cl_sm2.00.img.gz, (563, 353) - (712, 502)
[Wed Oct 26 08:54:49 2011] Writing fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26.gif
[Wed Oct 26 08:57:54 2011] ../../acisf10097/products/events/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26_src.evt and ../../acisf10097/products/events/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Wed Oct 26 08:57:54 2011] Size of ../../acisf10097/products/events/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26_src.evt.gz[events] = 3055 counts
[Wed Oct 26 08:57:54 2011] Mean chipx,y = (236.27, 584.90)
[Wed Oct 26 08:57:54 2011] Mean tdetx,y = (3645.90, 3849.73)
[Wed Oct 26 08:57:54 2011] chipx,y range = (206.00-266.00, 552.00-617.00)
[Wed Oct 26 08:57:54 2011] Size of ../../acisf10097/products/events/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 13047 counts
[Wed Oct 26 08:57:54 2011] ../../acisf10097/products/images/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26_src.img and ../../acisf10097/products/images/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Wed Oct 26 08:57:54 2011] ../../acisf10097/products/spectra/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26_src.pi and ../../acisf10097/products/spectra/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Wed Oct 26 08:57:57 2011] ../../acisf10097/products/lightcurves/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26_src.lc and ../../acisf10097/products/lightcurves/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Wed Oct 26 09:09:08 2011] Keeping rmf generated by specextract
[Wed Oct 26 09:09:08 2011] 170.51
[Wed Oct 26 11:25:05 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:25:05 2011] Error reading totcts from fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26_src.pi.gz
[Wed Oct 26 11:25:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:25:19 2011] Using photon index=1.80, rate=0.00513, arf fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src26.arf
[Wed Oct 26 11:25:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:25:19 2011] Updating source flux to 8.3e-14