[Wed Oct 26 08:12:24 2011] Detection parameters:
  Position = (909.7, 501.2) = 0 25 27.55 64 11 57.1
  Extent = 0.7" x 0.7", rotation angle = 173 degrees
  Source counts = 411.2 +/- 36.6
  Background counts = 927.8
  Rate = 0.004 +/- 0.0003

[Wed Oct 26 08:13:26 2011] Off-axis axis estimate = 3.50'
[Wed Oct 26 08:31:12 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:31:12 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Wed Oct 26 08:31:12 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.102
[Wed Oct 26 08:31:12 2011] Giving source the simple spatial ID 100 for pass 0, mean size = 0.69"
[Wed Oct 26 08:31:16 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src100.ximg exists
[Wed Oct 26 08:31:16 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src100_1.ximg exists
[Wed Oct 26 08:31:16 2011] Fit fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src100 appears to have run properly
[Wed Oct 26 08:31:18 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass0_tfrozen_src100.ximg exists
[Wed Oct 26 08:31:18 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass0_tfrozen_src100_1.ximg exists
[Wed Oct 26 08:31:18 2011] Fit fullrun_ccd2_acisf10097_pi14-548_cl_pass0_tfrozen_src100 appears to have run properly
[Wed Oct 26 08:32:34 2011] Spatial fit model total counts = 3495.730000, observed total counts = 3501.000000
[Wed Oct 26 08:32:34 2011] Offset between fit and detection position for source 113 = 4.748716 pixels
[Wed Oct 26 08:32:34 2011] 3427.122000 total counts/ 3056.110000 bgd. counts: snr = 6.711251
Spatial fit parameters:
  Offset between fit and detection position for source 113 = 4.748716 pixels
  Position = (913.3, 504.4) = 0 25 27.32 64 11 58.4
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 371.0 +/- 58.5
  Background counts = 3056.1
  Rate = 0.003 +/- 0.0005
[Wed Oct 26 08:32:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:32:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:32:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:32:34 2011] Source does appear to be extended
[Wed Oct 26 08:32:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:32:35 2011] Source is confused with source 111
[Wed Oct 26 08:34:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:34:35 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Wed Oct 26 08:34:35 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Wed Oct 26 08:34:35 2011] Giving source the simple spatial ID 98 for pass 1, mean size = 1.50"
[Wed Oct 26 08:34:40 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src98.ximg exists
[Wed Oct 26 08:34:40 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src98.csv
[Wed Oct 26 08:34:40 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src98_1.ximg exists
[Wed Oct 26 08:34:40 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src98.csv
[Wed Oct 26 08:34:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src98_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:34:43 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass1_tfrozen_src98.ximg exists
[Wed Oct 26 08:34:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10097_pi14-548_cl_pass1_tfrozen_src98.csv
[Wed Oct 26 08:34:43 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass1_tfrozen_src98_1.ximg exists
[Wed Oct 26 08:34:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10097_pi14-548_cl_pass1_tfrozen_src98.csv
[Wed Oct 26 08:34:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10097_pi14-548_cl_pass1_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10097_pi14-548_cl_pass1_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:35:54 2011] Spatial fit model total counts = 0.000090, observed total counts = 4459.000000
[Wed Oct 26 08:35:54 2011] Poor agreement between spatial fit and data for source 113
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Oct 26 08:35:54 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:35:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:35:54 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:35:54 2011] Source does appear to be extended
[Wed Oct 26 08:35:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:54:52 2011] Not overwriting source region fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113_src.reg
[Wed Oct 26 08:54:52 2011] Extracting stamp from image fullrun_ccd2_acisf10097_pi14-548_cl_sm2.00.img.gz, (845, 436) - (982, 573)
[Wed Oct 26 08:54:52 2011] Writing fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113.gif
[Wed Oct 26 09:00:12 2011] ../../acisf10097/products/events/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113_src.evt and ../../acisf10097/products/events/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113_bgd.evt exist, delete to re-create
[Wed Oct 26 09:00:12 2011] Size of ../../acisf10097/products/events/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113_src.evt.gz[events] = 6373 counts
[Wed Oct 26 09:00:12 2011] Mean chipx,y = (427.26, 795.11)
[Wed Oct 26 09:00:12 2011] Mean tdetx,y = (3856.11, 3658.74)
[Wed Oct 26 09:00:12 2011] chipx,y range = (397.00-458.00, 765.00-827.00)
[Wed Oct 26 09:00:12 2011] Size of ../../acisf10097/products/events/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113_bgd.evt.gz[events] = 12289 counts
[Wed Oct 26 09:00:12 2011] ../../acisf10097/products/images/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113_src.img and ../../acisf10097/products/images/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113_bgd.img exist, delete to re-create
[Wed Oct 26 09:00:12 2011] ../../acisf10097/products/spectra/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113_src.pi and ../../acisf10097/products/spectra/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113_bgd.pi exist, delete to re-create
[Wed Oct 26 09:00:15 2011] ../../acisf10097/products/lightcurves/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113_src.lc and ../../acisf10097/products/lightcurves/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113_bgd.lc exist, delete to re-create
[Wed Oct 26 09:09:10 2011] Keeping rmf generated by specextract
[Wed Oct 26 09:09:10 2011] 183.95
[Wed Oct 26 11:25:08 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:25:08 2011] Error reading totcts from fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113_src.pi.gz
[Wed Oct 26 11:25:21 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:25:21 2011] Using photon index=1.80, rate=0.00345, arf fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src113.arf
[Wed Oct 26 11:25:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:25:21 2011] Updating source flux to 5.2e-14
[Wed Oct 26 11:46:55 2011] Flag p found in src. 113 procflags, skipping spectral fitting
[Wed Oct 26 11:46:55 2011] Flag c found in src. 113 procflags, skipping spectral fitting