[Wed Oct 26 08:12:22 2011] Detection parameters:
  Position = (976.6, 458.5) = 0 25 22.51 64 11 36.0
  Extent = 0.5" x 0.5", rotation angle = 115 degrees
  Source counts = 803.9 +/- 51.4
  Background counts = 1839.1
  Rate = 0.007 +/- 0.0005

[Wed Oct 26 08:13:26 2011] Off-axis axis estimate = 3.10'
[Wed Oct 26 08:31:12 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:31:12 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Wed Oct 26 08:31:12 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.762
[Wed Oct 26 08:31:12 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 0.60"
[Wed Oct 26 08:31:15 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src38.ximg exists
[Wed Oct 26 08:31:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src38.csv
[Wed Oct 26 08:31:15 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src38_1.ximg exists
[Wed Oct 26 08:31:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src38.csv
[Wed Oct 26 08:31:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10097_pi14-548_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:31:17 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass0_tfrozen_src38.ximg exists
[Wed Oct 26 08:31:17 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Oct 26 08:31:17 2011] Fit fullrun_ccd2_acisf10097_pi14-548_cl_pass0_tfrozen_src38 appears to have run properly
[Wed Oct 26 08:32:34 2011] Spatial fit model total counts = 4757.010000, observed total counts = 4757.000000
[Wed Oct 26 08:32:34 2011] Offset between fit and detection position for source 101 = 0.664496 pixels
[Wed Oct 26 08:32:34 2011] 4801.681000 total counts/ 4319.110000 bgd. counts: snr = 7.342840
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 0.664496 pixels
  Position = (976.0, 458.9) = 0 25 22.59 64 11 36.0
  Extent = 1.4 (1.3-1.5)", rotation angle = 0
  Source counts = 482.6 +/- 69.3
  Background counts = 4319.1
  Rate = 0.004 +/- 0.0006
[Wed Oct 26 08:32:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:32:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:32:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:32:34 2011] Source does appear to be extended
[Wed Oct 26 08:32:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:34:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:34:35 2011] Initial guess for spatial extent in simple fitting = 1.43"
[Wed Oct 26 08:34:35 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.903
[Wed Oct 26 08:34:35 2011] Giving source the simple spatial ID 38 for pass 1, mean size = 1.43"
[Wed Oct 26 08:34:39 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src38.ximg exists
[Wed Oct 26 08:34:39 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src38.csv
[Wed Oct 26 08:34:39 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src38_1.ximg exists
[Wed Oct 26 08:34:39 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src38.csv
[Wed Oct 26 08:34:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10097_pi14-548_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:34:41 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass1_tfrozen_src38.ximg exists
[Wed Oct 26 08:34:41 2011] fullrun_ccd2_acisf10097_pi14-548_cl_pass1_tfrozen_src38_1.ximg exists
[Wed Oct 26 08:34:41 2011] Fit fullrun_ccd2_acisf10097_pi14-548_cl_pass1_tfrozen_src38 appears to have run properly
[Wed Oct 26 08:35:53 2011] Warning, spatial fit 38 centroid is now closest to src. 585
[Wed Oct 26 08:35:54 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:35:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:35:54 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:35:54 2011] Source does appear to be extended
[Wed Oct 26 08:35:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:54:48 2011] Not overwriting source region fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101_src.reg
[Wed Oct 26 08:54:48 2011] Extracting stamp from image fullrun_ccd2_acisf10097_pi14-548_cl_sm2.00.img.gz, (911, 393) - (1042, 524)
[Wed Oct 26 08:54:48 2011] Writing fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101.gif
[Wed Oct 26 08:57:06 2011] ../../acisf10097/products/events/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101_src.evt and ../../acisf10097/products/events/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101_bgd.evt exist, delete to re-create
[Wed Oct 26 08:57:06 2011] Size of ../../acisf10097/products/events/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101_src.evt.gz[events] = 7533 counts
[Wed Oct 26 08:57:06 2011] Mean chipx,y = (414.91, 870.20)
[Wed Oct 26 08:57:06 2011] Mean tdetx,y = (3931.20, 3671.09)
[Wed Oct 26 08:57:06 2011] chipx,y range = (385.00-444.00, 842.00-906.00)
[Wed Oct 26 08:57:06 2011] Size of ../../acisf10097/products/events/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101_bgd.evt.gz[events] = 29437 counts
[Wed Oct 26 08:57:06 2011] ../../acisf10097/products/images/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101_src.img and ../../acisf10097/products/images/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101_bgd.img exist, delete to re-create
[Wed Oct 26 08:57:06 2011] ../../acisf10097/products/spectra/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101_src.pi and ../../acisf10097/products/spectra/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101_bgd.pi exist, delete to re-create
[Wed Oct 26 08:57:09 2011] ../../acisf10097/products/lightcurves/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101_src.lc and ../../acisf10097/products/lightcurves/fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101_bgd.lc exist, delete to re-create
[Wed Oct 26 09:09:07 2011] Keeping rmf generated by specextract
[Wed Oct 26 09:09:07 2011] 189.728
[Wed Oct 26 11:25:04 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:25:04 2011] Error reading totcts from fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101_src.pi.gz
[Wed Oct 26 11:25:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:25:18 2011] Using photon index=1.80, rate=0.00449, arf fullrun_ccd2_acisf10097_pi14-548_pass1_cl_src101.arf
[Wed Oct 26 11:25:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:25:18 2011] Updating source flux to 6.5e-14