[Wed Oct 26 08:11:49 2011] Detection parameters:
  Position = (648.5, 924.5) = 0 25 11.42 64 4 2.4
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 368.8 +/- 26.9
  Background counts = 353.2
  Rate = 0.003 +/- 0.0003

[Wed Oct 26 08:12:08 2011] Off-axis axis estimate = 4.62'
[Wed Oct 26 08:31:02 2011] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:31:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 08:31:02 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Wed Oct 26 08:31:02 2011] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.628
[Wed Oct 26 08:31:02 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 1.03"
[Wed Oct 26 08:31:06 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src51.ximg exists
[Wed Oct 26 08:31:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src51.csv
[Wed Oct 26 08:31:06 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src51_1.ximg exists
[Wed Oct 26 08:31:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src51.csv
[Wed Oct 26 08:31:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:31:10 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass0_tfrozen_src51.ximg exists
[Wed Oct 26 08:31:10 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass0_tfrozen_src51_1.ximg exists
[Wed Oct 26 08:31:10 2011] Fit fullrun_ccd1_acisf10097_pi14-548_cl_pass0_tfrozen_src51 appears to have run properly
[Wed Oct 26 08:32:19 2011] Spatial fit model total counts = 1099.860000, observed total counts = 1108.000000
[Wed Oct 26 08:32:19 2011] Offset between fit and detection position for source 400 = 3.607701 pixels
[Wed Oct 26 08:32:19 2011] 1140.099000 total counts/ 772.745000 bgd. counts: snr = 13.214985
Spatial fit parameters:
  Offset between fit and detection position for source 400 = 3.607701 pixels
  Position = (647.0, 927.8) = 0 25 11.57 64 4 3.8
  Extent = 2.1 (2.0-4.1)", rotation angle = 0
  Source counts = 367.4 +/- 33.8
  Background counts = 772.7
  Rate = 0.003 +/- 0.0003
[Wed Oct 26 08:32:20 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:32:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:32:20 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:32:20 2011] Source does appear to be extended
[Wed Oct 26 08:32:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:34:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:34:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 08:34:23 2011] Initial guess for spatial extent in simple fitting = 2.07"
[Wed Oct 26 08:34:23 2011] source mask rpix=4.2, npix_max = 88, mask sum = 75, frac = 0.847
[Wed Oct 26 08:34:23 2011] Giving source the simple spatial ID 51 for pass 1, mean size = 2.07"
[Wed Oct 26 08:34:25 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src51.ximg exists
[Wed Oct 26 08:34:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src51.csv
[Wed Oct 26 08:34:25 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src51_1.ximg exists
[Wed Oct 26 08:34:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src51.csv
[Wed Oct 26 08:34:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:34:29 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass1_tfrozen_src51.ximg exists
[Wed Oct 26 08:34:29 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass1_tfrozen_src51_1.ximg exists
[Wed Oct 26 08:34:29 2011] Fit fullrun_ccd1_acisf10097_pi14-548_cl_pass1_tfrozen_src51 appears to have run properly
[Wed Oct 26 08:35:39 2011] Spatial fit model total counts = 2286.520000, observed total counts = 2290.000000
[Wed Oct 26 08:35:39 2011] Offset between fit and detection position for source 400 = 2.992824 pixels
[Wed Oct 26 08:35:39 2011] 2351.500000 total counts/ 1814.860000 bgd. counts: snr = 12.596836
Spatial fit parameters:
  Offset between fit and detection position for source 400 = 2.992824 pixels
  Position = (649.7, 926.5) = 0 25 11.37 64 4 3.2
  Extent = 2.3 (1.7-2.9)", rotation angle = 0
  Source counts = 536.6 +/- 48.5
  Background counts = 1814.9
  Rate = 0.005 +/- 0.0005
[Wed Oct 26 08:35:40 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:35:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:35:40 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:35:40 2011] Source does appear to be extended
[Wed Oct 26 08:35:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:44:17 2011] Not overwriting source region fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400_src.reg
[Wed Oct 26 08:44:17 2011] Extracting stamp from image fullrun_ccd1_acisf10097_pi14-548_cl_sm2.00.img.gz, (545, 821) - (755, 1032)
[Wed Oct 26 08:44:17 2011] Writing fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400.gif
[Wed Oct 26 08:46:47 2011] ../../acisf10097/products/events/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400_src.evt and ../../acisf10097/products/events/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400_bgd.evt exist, delete to re-create
[Wed Oct 26 08:46:47 2011] Size of ../../acisf10097/products/events/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400_src.evt.gz[events] = 3907 counts
[Wed Oct 26 08:46:47 2011] Mean chipx,y = (319.59, 655.69)
[Wed Oct 26 08:46:47 2011] Mean tdetx,y = (4476.31, 4426.59)
[Wed Oct 26 08:46:47 2011] chipx,y range = (288.00-359.00, 620.00-691.00)
[Wed Oct 26 08:46:47 2011] Size of ../../acisf10097/products/events/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400_bgd.evt.gz[events] = 15507 counts
[Wed Oct 26 08:46:47 2011] ../../acisf10097/products/images/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400_src.img and ../../acisf10097/products/images/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400_bgd.img exist, delete to re-create
[Wed Oct 26 08:46:47 2011] ../../acisf10097/products/spectra/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400_src.pi and ../../acisf10097/products/spectra/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400_bgd.pi exist, delete to re-create
[Wed Oct 26 08:46:50 2011] ../../acisf10097/products/lightcurves/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400_src.lc and ../../acisf10097/products/lightcurves/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400_bgd.lc exist, delete to re-create
[Wed Oct 26 08:54:37 2011] Keeping rmf generated by specextract
[Wed Oct 26 08:54:37 2011] 190.615
[Wed Oct 26 11:24:44 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:24:44 2011] Error reading totcts from fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400_src.pi.gz
[Wed Oct 26 11:24:55 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:24:55 2011] Using photon index=1.80, rate=0.005, arf fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src400.arf
[Wed Oct 26 11:24:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:24:55 2011] Updating source flux to 7.2e-14