[Wed Oct 26 08:11:04 2011] Detection parameters:
  Position = (602.6, 1063.3) = 0 25 14.86 64 5 10.7
  Extent = 0.7" x 0.7", rotation angle = 31 degrees
  Source counts = 655.3 +/- 50.8
  Background counts = 1924.7
  Rate = 0.006 +/- 0.0005

[Wed Oct 26 08:12:08 2011] Off-axis axis estimate = 3.42'
[Wed Oct 26 08:31:02 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:31:02 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Wed Oct 26 08:31:02 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.860
[Wed Oct 26 08:31:02 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 0.67"
[Wed Oct 26 08:31:06 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src23.ximg exists
[Wed Oct 26 08:31:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src23.csv
[Wed Oct 26 08:31:06 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src23_1.ximg exists
[Wed Oct 26 08:31:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src23.csv
[Wed Oct 26 08:31:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:31:08 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Wed Oct 26 08:31:08 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Oct 26 08:31:08 2011] Fit fullrun_ccd1_acisf10097_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Oct 26 08:32:19 2011] Spatial fit model total counts = 3718.000000, observed total counts = 3718.000000
[Wed Oct 26 08:32:19 2011] Offset between fit and detection position for source 22 = 0.425038 pixels
[Wed Oct 26 08:32:19 2011] 3688.360000 total counts/ 3409.560000 bgd. counts: snr = 4.774673
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.425038 pixels
  Position = (603.0, 1063.2) = 0 25 14.87 64 5 10.4
  Extent = 1.1 (0.8-1.5)", rotation angle = 0
  Source counts = 278.8 +/- 60.7
  Background counts = 3409.6
  Rate = 0.003 +/- 0.0006
[Wed Oct 26 08:32:20 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:32:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:32:20 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:32:20 2011] Source does appear to be extended
[Wed Oct 26 08:32:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:34:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:34:23 2011] Initial guess for spatial extent in simple fitting = 1.14"
[Wed Oct 26 08:34:23 2011] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.141
[Wed Oct 26 08:34:23 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 1.14"
[Wed Oct 26 08:34:24 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src23.ximg exists
[Wed Oct 26 08:34:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src23.csv
[Wed Oct 26 08:34:24 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src23_1.ximg exists
[Wed Oct 26 08:34:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src23.csv
[Wed Oct 26 08:34:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:34:26 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Wed Oct 26 08:34:26 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Oct 26 08:34:26 2011] Fit fullrun_ccd1_acisf10097_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Wed Oct 26 08:35:39 2011] Spatial fit model total counts = 3758.810000, observed total counts = 3752.000000
[Wed Oct 26 08:35:39 2011] Offset between fit and detection position for source 22 = 0.292070 pixels
[Wed Oct 26 08:35:39 2011] 3738.462000 total counts/ 3477.440000 bgd. counts: snr = 4.426366
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.292070 pixels
  Position = (602.7, 1063.2) = 0 25 14.89 64 5 10.4
  Extent = 1.1 (0.7-1.6)", rotation angle = 0
  Source counts = 261.0 +/- 61.1
  Background counts = 3477.4
  Rate = 0.002 +/- 0.0006
[Wed Oct 26 08:35:40 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:35:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:35:40 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:35:40 2011] Source does appear to be extended
[Wed Oct 26 08:35:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:35:40 2011] Source is confused with source 12
[Wed Oct 26 08:44:16 2011] Not overwriting source region fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22_src.reg
[Wed Oct 26 08:44:16 2011] Extracting stamp from image fullrun_ccd1_acisf10097_pi14-548_cl_sm2.00.img.gz, (552, 1012) - (654, 1114)
[Wed Oct 26 08:44:16 2011] Writing fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22.gif
[Wed Oct 26 08:45:34 2011] ../../acisf10097/products/events/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22_src.evt and ../../acisf10097/products/events/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Wed Oct 26 08:45:34 2011] Size of ../../acisf10097/products/events/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22_src.evt.gz[events] = 3838 counts
[Wed Oct 26 08:45:34 2011] Mean chipx,y = (221.69, 759.43)
[Wed Oct 26 08:45:34 2011] Mean tdetx,y = (4372.57, 4328.69)
[Wed Oct 26 08:45:34 2011] chipx,y range = (196.00-249.00, 726.00-785.00)
[Wed Oct 26 08:45:34 2011] Size of ../../acisf10097/products/events/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 5010 counts
[Wed Oct 26 08:45:34 2011] ../../acisf10097/products/images/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22_src.img and ../../acisf10097/products/images/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Wed Oct 26 08:45:34 2011] ../../acisf10097/products/spectra/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22_src.pi and ../../acisf10097/products/spectra/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Wed Oct 26 08:45:37 2011] ../../acisf10097/products/lightcurves/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22_src.lc and ../../acisf10097/products/lightcurves/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Wed Oct 26 08:54:35 2011] Keeping rmf generated by specextract
[Wed Oct 26 08:54:35 2011] 199.611
[Wed Oct 26 11:24:43 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:24:43 2011] Error reading totcts from fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22_src.pi.gz
[Wed Oct 26 11:24:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:24:53 2011] Using photon index=1.80, rate=0.00243, arf fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src22.arf
[Wed Oct 26 11:24:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:24:53 2011] Updating source flux to 3.4e-14
[Wed Oct 26 11:36:44 2011] Flag c found in src. 22 procflags, skipping spectral fitting