[Wed Oct 26 08:11:24 2011] Detection parameters:
  Position = (536.6, 937.8) = 0 25 19.81 64 4 8.9
  Extent = 0.7" x 0.6", rotation angle = 155 degrees
  Source counts = 260.4 +/- 23.2
  Background counts = 276.6
  Rate = 0.002 +/- 0.0002

[Wed Oct 26 08:12:08 2011] Off-axis axis estimate = 4.36'
[Wed Oct 26 08:31:02 2011] Using EEF radius (= 0.95 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:31:02 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Wed Oct 26 08:31:02 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.065
[Wed Oct 26 08:31:02 2011] Giving source the simple spatial ID 67 for pass 0, mean size = 0.95"
[Wed Oct 26 08:31:07 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src67.ximg exists
[Wed Oct 26 08:31:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src67.csv
[Wed Oct 26 08:31:07 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src67_1.ximg exists
[Wed Oct 26 08:31:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src67.csv
[Wed Oct 26 08:31:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10097_pi14-548_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:31:11 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass0_tfrozen_src67.ximg exists
[Wed Oct 26 08:31:11 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass0_tfrozen_src67_1.ximg exists
[Wed Oct 26 08:31:11 2011] Fit fullrun_ccd1_acisf10097_pi14-548_cl_pass0_tfrozen_src67 appears to have run properly
[Wed Oct 26 08:32:20 2011] Source 192 is offset by 5.197627 and 7.450906 pixels which is larger than
2 X fitted extent = 0.961146 x 0.961146, not incorporating fit results
[Wed Oct 26 08:32:20 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:32:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:32:20 2011] Assessing source extent using major
[Wed Oct 26 08:32:20 2011] Source does appear to be extended
[Wed Oct 26 08:32:20 2011] Computing asymmetry using major and minor axis, asym = 1.18
[Wed Oct 26 08:34:23 2011] Using EEF radius (= 0.95 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:34:23 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Wed Oct 26 08:34:23 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.065
[Wed Oct 26 08:34:23 2011] Giving source the simple spatial ID 66 for pass 1, mean size = 0.95"
[Wed Oct 26 08:34:25 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src66.ximg exists
[Wed Oct 26 08:34:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src66.csv
[Wed Oct 26 08:34:25 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src66_1.ximg exists
[Wed Oct 26 08:34:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src66.csv
[Wed Oct 26 08:34:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10097_pi14-548_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:34:34 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass1_tfrozen_src66.ximg exists
[Wed Oct 26 08:34:34 2011] fullrun_ccd1_acisf10097_pi14-548_cl_pass1_tfrozen_src66_1.ximg exists
[Wed Oct 26 08:34:34 2011] Fit fullrun_ccd1_acisf10097_pi14-548_cl_pass1_tfrozen_src66 appears to have run properly
[Wed Oct 26 08:35:40 2011] Spatial fit model total counts = 1062.140000, observed total counts = 1062.000000
[Wed Oct 26 08:35:40 2011] Offset between fit and detection position for source 192 = 2.737599 pixels
[Wed Oct 26 08:35:40 2011] 1119.533000 total counts/ 969.281000 bgd. counts: snr = 4.826090
Spatial fit parameters:
  Offset between fit and detection position for source 192 = 2.737599 pixels
  Position = (539.3, 937.4) = 0 25 19.65 64 4 8.5
  Extent = 1.3 (0.8-1.8)", rotation angle = 0
  Source counts = 150.3 +/- 33.5
  Background counts = 969.3
  Rate = 0.001 +/- 0.0003
[Wed Oct 26 08:35:40 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:35:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:35:40 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:35:40 2011] Source does appear to be extended
[Wed Oct 26 08:35:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:44:17 2011] Not overwriting source region fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192_src.reg
[Wed Oct 26 08:44:17 2011] Extracting stamp from image fullrun_ccd1_acisf10097_pi14-548_cl_sm2.00.img.gz, (480, 879) - (598, 996)
[Wed Oct 26 08:44:17 2011] Writing fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192.gif
[Wed Oct 26 08:47:35 2011] ../../acisf10097/products/events/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192_src.evt and ../../acisf10097/products/events/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192_bgd.evt exist, delete to re-create
[Wed Oct 26 08:47:35 2011] Size of ../../acisf10097/products/events/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192_src.evt.gz[events] = 1430 counts
[Wed Oct 26 08:47:35 2011] Mean chipx,y = (359.64, 761.63)
[Wed Oct 26 08:47:35 2011] Mean tdetx,y = (4370.37, 4466.64)
[Wed Oct 26 08:47:35 2011] chipx,y range = (336.00-387.00, 735.00-787.00)
[Wed Oct 26 08:47:36 2011] Size of ../../acisf10097/products/events/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192_bgd.evt.gz[events] = 7463 counts
[Wed Oct 26 08:47:36 2011] ../../acisf10097/products/images/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192_src.img and ../../acisf10097/products/images/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192_bgd.img exist, delete to re-create
[Wed Oct 26 08:47:36 2011] ../../acisf10097/products/spectra/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192_src.pi and ../../acisf10097/products/spectra/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192_bgd.pi exist, delete to re-create
[Wed Oct 26 08:47:38 2011] ../../acisf10097/products/lightcurves/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192_src.lc and ../../acisf10097/products/lightcurves/fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192_bgd.lc exist, delete to re-create
[Wed Oct 26 08:54:38 2011] Keeping rmf generated by specextract
[Wed Oct 26 08:54:38 2011] 195.2
[Wed Oct 26 11:24:45 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:24:45 2011] Error reading totcts from fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192_src.pi.gz
[Wed Oct 26 11:24:55 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:24:55 2011] Using photon index=1.80, rate=0.0014, arf fullrun_ccd1_acisf10097_pi14-548_pass1_cl_src192.arf
[Wed Oct 26 11:24:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:24:56 2011] Updating source flux to 2e-14
[Wed Oct 26 11:36:44 2011] Flag b found in src. 192 procflags, skipping spectral fitting