[Wed Oct 26 08:10:25 2011] Detection parameters:
  Position = (1266.4, 757.7) = 0 25 34.54 64 6 28.6
  Extent = 0.5" x 0.5", rotation angle = 135 degrees
  Source counts = 238.0 +/- 27.4
  Background counts = 514.0
  Rate = 0.002 +/- 0.0003

[Wed Oct 26 08:11:01 2011] Off-axis axis estimate = 2.44'
[Wed Oct 26 08:30:53 2011] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:30:53 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Wed Oct 26 08:30:53 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.024
[Wed Oct 26 08:30:53 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.48"
[Wed Oct 26 08:30:55 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass0_src27.ximg exists
[Wed Oct 26 08:30:55 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass0_src27_1.ximg exists
[Wed Oct 26 08:30:55 2011] Fit fullrun_ccd0_acisf10097_pi14-548_cl_pass0_src27 appears to have run properly
[Wed Oct 26 08:30:59 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Wed Oct 26 08:30:59 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Oct 26 08:30:59 2011] Fit fullrun_ccd0_acisf10097_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Wed Oct 26 08:32:04 2011] Spatial fit model total counts = 2162.510000, observed total counts = 2162.000000
[Wed Oct 26 08:32:04 2011] Offset between fit and detection position for source 29 = 4.163910 pixels
[Wed Oct 26 08:32:04 2011] 2195.135000 total counts/ 1766.850000 bgd. counts: snr = 10.189034
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 4.163910 pixels
  Position = (1265.5, 761.7) = 0 25 34.65 64 6 30.4
  Extent = 1.5 (1.5-3.0)" x 1.2 (1.1-1.4)", rotation angle = 76 (56-90) degrees
  Source counts = 428.3 +/- 46.9
  Background counts = 1766.8
  Rate = 0.004 +/- 0.0004
[Wed Oct 26 08:32:05 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:32:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:32:05 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:32:05 2011] Source does appear to be extended
[Wed Oct 26 08:32:05 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Wed Oct 26 08:34:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:34:15 2011] Initial guess for spatial extent in simple fitting = 1.33"
[Wed Oct 26 08:34:15 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.025
[Wed Oct 26 08:34:15 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 1.33"
[Wed Oct 26 08:34:17 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass1_src26.ximg exists
[Wed Oct 26 08:34:17 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10097_pi14-548_cl_pass1_src26.csv
[Wed Oct 26 08:34:17 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass1_src26_1.ximg exists
[Wed Oct 26 08:34:17 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10097_pi14-548_cl_pass1_src26.csv
[Wed Oct 26 08:34:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10097_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10097_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:34:20 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Wed Oct 26 08:34:20 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10097_pi14-548_cl_pass1_tfrozen_src26.csv
[Wed Oct 26 08:34:20 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Oct 26 08:34:20 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10097_pi14-548_cl_pass1_tfrozen_src26.csv
[Wed Oct 26 08:34:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10097_pi14-548_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10097_pi14-548_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:35:25 2011] Warning, spatial fit 26 centroid is now closest to src. 132
[Wed Oct 26 08:35:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:35:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:35:25 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:35:25 2011] Source does appear to be extended
[Wed Oct 26 08:35:25 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Wed Oct 26 08:37:40 2011] Not overwriting source region fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29_src.reg
[Wed Oct 26 08:37:40 2011] Extracting stamp from image fullrun_ccd0_acisf10097_pi14-548_cl_sm2.00.img.gz, (1197, 693) - (1334, 830)
[Wed Oct 26 08:37:40 2011] Writing fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29.gif
[Wed Oct 26 08:39:05 2011] ../../acisf10097/products/events/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29_src.evt and ../../acisf10097/products/events/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Wed Oct 26 08:39:05 2011] Size of ../../acisf10097/products/events/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29_src.evt.gz[events] = 3249 counts
[Wed Oct 26 08:39:05 2011] Mean chipx,y = (833.40, 1002.06)
[Wed Oct 26 08:39:05 2011] Mean tdetx,y = (4063.06, 4298.60)
[Wed Oct 26 08:39:05 2011] chipx,y range = (801.00-861.00, 976.00-1023.00)
[Wed Oct 26 08:39:05 2011] Size of ../../acisf10097/products/events/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 10486 counts
[Wed Oct 26 08:39:05 2011] ../../acisf10097/products/images/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29_src.img and ../../acisf10097/products/images/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Wed Oct 26 08:39:05 2011] ../../acisf10097/products/spectra/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29_src.pi and ../../acisf10097/products/spectra/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Wed Oct 26 08:39:07 2011] ../../acisf10097/products/lightcurves/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29_src.lc and ../../acisf10097/products/lightcurves/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Wed Oct 26 08:44:08 2011] Keeping rmf generated by specextract
[Wed Oct 26 08:44:08 2011] 200.228
[Wed Oct 26 11:24:30 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:24:30 2011] Error reading totcts from fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29_src.pi.gz
[Wed Oct 26 11:24:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:24:36 2011] Using photon index=1.80, rate=0.00399, arf fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src29.arf
[Wed Oct 26 11:24:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:24:37 2011] Updating source flux to 5.6e-14