[Wed Oct 26 08:10:33 2011] Detection parameters:
  Position = (1068.5, 724.4) = 0 25 49.40 64 6 12.1
  Extent = 0.7" x 0.7", rotation angle = 56 degrees
  Source counts = 605.3 +/- 44.9
  Background counts = 1410.7
  Rate = 0.006 +/- 0.0004

[Wed Oct 26 08:11:01 2011] Off-axis axis estimate = 3.76'
[Wed Oct 26 08:30:53 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:30:53 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Wed Oct 26 08:30:53 2011] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.195
[Wed Oct 26 08:30:53 2011] Giving source the simple spatial ID 86 for pass 0, mean size = 0.76"
[Wed Oct 26 08:30:58 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass0_src86.ximg exists
[Wed Oct 26 08:30:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10097_pi14-548_cl_pass0_src86.csv
[Wed Oct 26 08:30:58 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass0_src86_1.ximg exists
[Wed Oct 26 08:30:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10097_pi14-548_cl_pass0_src86.csv
[Wed Oct 26 08:30:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10097_pi14-548_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10097_pi14-548_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:31:01 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass0_tfrozen_src86.ximg exists
[Wed Oct 26 08:31:01 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass0_tfrozen_src86_1.ximg exists
[Wed Oct 26 08:31:01 2011] Fit fullrun_ccd0_acisf10097_pi14-548_cl_pass0_tfrozen_src86 appears to have run properly
[Wed Oct 26 08:32:05 2011] Spatial fit model total counts = 2368.680000, observed total counts = 2369.000000
[Wed Oct 26 08:32:05 2011] Offset between fit and detection position for source 103 = 0.461716 pixels
[Wed Oct 26 08:32:05 2011] 2344.705000 total counts/ 2070.530000 bgd. counts: snr = 6.025417
Spatial fit parameters:
  Offset between fit and detection position for source 103 = 0.461716 pixels
  Position = (1068.1, 724.6) = 0 25 49.47 64 6 12.0
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 274.2 +/- 48.4
  Background counts = 2070.5
  Rate = 0.003 +/- 0.0005
[Wed Oct 26 08:32:05 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:32:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:32:05 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:32:05 2011] Source does appear to be extended
[Wed Oct 26 08:32:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:34:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:34:15 2011] Initial guess for spatial extent in simple fitting = 1.52"
[Wed Oct 26 08:34:15 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.950
[Wed Oct 26 08:34:15 2011] Giving source the simple spatial ID 69 for pass 1, mean size = 1.52"
[Wed Oct 26 08:34:18 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass1_src69.ximg exists
[Wed Oct 26 08:34:18 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10097_pi14-548_cl_pass1_src69.csv
[Wed Oct 26 08:34:18 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass1_src69_1.ximg exists
[Wed Oct 26 08:34:18 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10097_pi14-548_cl_pass1_src69.csv
[Wed Oct 26 08:34:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10097_pi14-548_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10097_pi14-548_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:34:21 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass1_tfrozen_src69.ximg exists
[Wed Oct 26 08:34:21 2011] fullrun_ccd0_acisf10097_pi14-548_cl_pass1_tfrozen_src69_1.ximg exists
[Wed Oct 26 08:34:21 2011] Fit fullrun_ccd0_acisf10097_pi14-548_cl_pass1_tfrozen_src69 appears to have run properly
[Wed Oct 26 08:35:25 2011] Warning, spatial fit 69 centroid is now closest to src. 330
[Wed Oct 26 08:35:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:35:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:35:25 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:35:25 2011] Source does appear to be extended
[Wed Oct 26 08:35:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:37:42 2011] Not overwriting source region fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103_src.reg
[Wed Oct 26 08:37:42 2011] Extracting stamp from image fullrun_ccd0_acisf10097_pi14-548_cl_sm2.00.img.gz, (999, 655) - (1138, 794)
[Wed Oct 26 08:37:42 2011] Writing fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103.gif
[Wed Oct 26 08:41:14 2011] ../../acisf10097/products/events/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103_src.evt and ../../acisf10097/products/events/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103_bgd.evt exist, delete to re-create
[Wed Oct 26 08:41:14 2011] Size of ../../acisf10097/products/events/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103_src.evt.gz[events] = 4101 counts
[Wed Oct 26 08:41:14 2011] Mean chipx,y = (711.17, 841.77)
[Wed Oct 26 08:41:14 2011] Mean tdetx,y = (3902.77, 4420.83)
[Wed Oct 26 08:41:14 2011] chipx,y range = (679.00-741.00, 813.00-872.00)
[Wed Oct 26 08:41:14 2011] Size of ../../acisf10097/products/events/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103_bgd.evt.gz[events] = 11819 counts
[Wed Oct 26 08:41:14 2011] ../../acisf10097/products/images/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103_src.img and ../../acisf10097/products/images/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103_bgd.img exist, delete to re-create
[Wed Oct 26 08:41:14 2011] ../../acisf10097/products/spectra/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103_src.pi and ../../acisf10097/products/spectra/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103_bgd.pi exist, delete to re-create
[Wed Oct 26 08:41:17 2011] ../../acisf10097/products/lightcurves/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103_src.lc and ../../acisf10097/products/lightcurves/fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103_bgd.lc exist, delete to re-create
[Wed Oct 26 08:44:10 2011] Keeping rmf generated by specextract
[Wed Oct 26 08:44:10 2011] 193.807
[Wed Oct 26 11:24:32 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:24:32 2011] Error reading totcts from fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103_src.pi.gz
[Wed Oct 26 11:24:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:24:39 2011] Using photon index=1.80, rate=0.00255, arf fullrun_ccd0_acisf10097_pi14-548_pass1_cl_src103.arf
[Wed Oct 26 11:24:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:24:39 2011] Updating source flux to 3.6e-14