[Mon Oct  3 15:03:02 2011] Detection parameters:
  Position = (1018.7, 520.4) = 0 25 18.21 64 12 11.5
  Extent = 0.7" x 0.7", rotation angle = 173 degrees
  Source counts = 1004.8 +/- 49.9
  Background counts = 1481.2
  Rate = 0.01 +/- 0.0005

[Mon Oct  3 15:03:11 2011] Off-axis axis estimate = 3.69'
[Mon Oct  3 15:22:07 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:22:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 15:22:07 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Mon Oct  3 15:22:07 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.991
[Mon Oct  3 15:22:07 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 0.74"
[Mon Oct  3 15:22:15 2011] fullrun_ccd2_acisf10096_pi14-548_cl_pass0_src24.ximg exists
[Mon Oct  3 15:22:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10096_pi14-548_cl_pass0_src24.csv
[Mon Oct  3 15:22:16 2011] fullrun_ccd2_acisf10096_pi14-548_cl_pass0_src24_1.ximg exists
[Mon Oct  3 15:22:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10096_pi14-548_cl_pass0_src24.csv
[Mon Oct  3 15:22:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10096_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10096_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:22:24 2011] fullrun_ccd2_acisf10096_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Mon Oct  3 15:22:24 2011] fullrun_ccd2_acisf10096_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Mon Oct  3 15:22:24 2011] Fit fullrun_ccd2_acisf10096_pi14-548_cl_pass0_tfrozen_src24 appears to have run properly
[Mon Oct  3 15:24:04 2011] Spatial fit model total counts = 3804.670000, observed total counts = 3803.000000
[Mon Oct  3 15:24:04 2011] Offset between fit and detection position for source 535 = 3.196762 pixels
[Mon Oct  3 15:24:04 2011] 3811.011000 total counts/ 3710.110000 bgd. counts: snr = 1.656541
Spatial fit parameters:
  Offset between fit and detection position for source 535 = 3.196762 pixels
  Position = (1021.9, 520.4) = 0 25 18.00 64 12 11.2
  Extent = 0.9 (0.3-1.5)", rotation angle = 0
  Source counts = 100.9 +/- 61.7
  Background counts = 3710.1
  Rate = 0.001 +/- 0.0006
  Deleting source due to low Poisson probability