[Mon Oct  3 15:01:53 2011] Detection parameters:
  Position = (925.7, 217.5) = 0 25 25.21 64 9 42.5
  Extent = 0.5" x 0.5", rotation angle = 128 degrees
  Source counts = 381.9 +/- 31.1
  Background counts = 588.1
  Rate = 0.004 +/- 0.0003

[Mon Oct  3 15:03:11 2011] Off-axis axis estimate = 1.23'
[Mon Oct  3 15:22:07 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:22:07 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct  3 15:22:07 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.378
[Mon Oct  3 15:22:07 2011] Giving source the simple spatial ID 89 for pass 0, mean size = 0.38"
[Mon Oct  3 15:22:19 2011] fullrun_ccd2_acisf10096_pi14-548_cl_pass0_src89.ximg exists
[Mon Oct  3 15:22:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10096_pi14-548_cl_pass0_src89.csv
[Mon Oct  3 15:22:22 2011] fullrun_ccd2_acisf10096_pi14-548_cl_pass0_src89_1.ximg exists
[Mon Oct  3 15:22:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10096_pi14-548_cl_pass0_src89.csv
[Mon Oct  3 15:22:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10096_pi14-548_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10096_pi14-548_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:22:28 2011] fullrun_ccd2_acisf10096_pi14-548_cl_pass0_tfrozen_src89.ximg exists
[Mon Oct  3 15:22:28 2011] fullrun_ccd2_acisf10096_pi14-548_cl_pass0_tfrozen_src89_1.ximg exists
[Mon Oct  3 15:22:28 2011] Fit fullrun_ccd2_acisf10096_pi14-548_cl_pass0_tfrozen_src89 appears to have run properly
[Mon Oct  3 15:24:05 2011] Spatial fit model total counts = 2862.010000, observed total counts = 2862.000000
[Mon Oct  3 15:24:05 2011] Offset between fit and detection position for source 211 = 0.929077 pixels
[Mon Oct  3 15:24:05 2011] 2914.504000 total counts/ 2801.250000 bgd. counts: snr = 2.139822
Spatial fit parameters:
  Offset between fit and detection position for source 211 = 0.929077 pixels
  Position = (926.5, 218.0) = 0 25 25.19 64 9 42.4
  Extent = 1.1 (0.4-1.5)", rotation angle = 0
  Source counts = 113.3 +/- 54.0
  Background counts = 2801.2
  Rate = 0.001 +/- 0.0005
[Mon Oct  3 15:24:05 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:24:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:24:05 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:24:05 2011] Source does appear to be extended
[Mon Oct  3 15:24:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:27:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:27:34 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Mon Oct  3 15:27:34 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.988
[Mon Oct  3 15:27:34 2011] Giving source the simple spatial ID 85 for pass 1, mean size = 1.11"
[Mon Oct  3 15:28:04 2011] fullrun_ccd2_acisf10096_pi14-548_cl_pass1_src85.ximg exists
[Mon Oct  3 15:28:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10096_pi14-548_cl_pass1_src85.csv
[Mon Oct  3 15:28:04 2011] fullrun_ccd2_acisf10096_pi14-548_cl_pass1_src85_1.ximg exists
[Mon Oct  3 15:28:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10096_pi14-548_cl_pass1_src85.csv
[Mon Oct  3 15:28:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10096_pi14-548_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10096_pi14-548_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:28:10 2011] fullrun_ccd2_acisf10096_pi14-548_cl_pass1_tfrozen_src85.ximg exists
[Mon Oct  3 15:28:10 2011] fullrun_ccd2_acisf10096_pi14-548_cl_pass1_tfrozen_src85_1.ximg exists
[Mon Oct  3 15:28:10 2011] Fit fullrun_ccd2_acisf10096_pi14-548_cl_pass1_tfrozen_src85 appears to have run properly
[Mon Oct  3 15:29:52 2011] Spatial fit model total counts = 2809.990000, observed total counts = 2810.000000
[Mon Oct  3 15:29:52 2011] Offset between fit and detection position for source 211 = 1.250216 pixels
[Mon Oct  3 15:29:52 2011] 2868.189000 total counts/ 2619.340000 bgd. counts: snr = 4.862280
Spatial fit parameters:
  Offset between fit and detection position for source 211 = 1.250216 pixels
  Position = (926.9, 216.8) = 0 25 25.16 64 9 41.8
  Extent = 1.7 (0.8-2.2)", rotation angle = 0
  Source counts = 248.8 +/- 53.6
  Background counts = 2619.3
  Rate = 0.002 +/- 0.0005
[Mon Oct  3 15:29:52 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:29:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:29:52 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:29:52 2011] Source does appear to be extended
[Mon Oct  3 15:29:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:58:48 2011] Not overwriting source region fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211_src.reg
[Mon Oct  3 15:58:48 2011] Extracting stamp from image fullrun_ccd2_acisf10096_pi14-548_cl_sm2.00.img.gz, (851, 141) - (1003, 293)
[Mon Oct  3 15:58:48 2011] Writing fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211.gif
[Mon Oct  3 16:04:45 2011] ../../acisf10096/products/events/fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211_src.evt and ../../acisf10096/products/events/fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211_bgd.evt exist, delete to re-create
[Mon Oct  3 16:04:46 2011] Size of ../../acisf10096/products/events/fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211_src.evt.gz[events] = 6342 counts
[Mon Oct  3 16:04:46 2011] Mean chipx,y = (180.76, 945.39)
[Mon Oct  3 16:04:46 2011] Mean tdetx,y = (4006.39, 3905.24)
[Mon Oct  3 16:04:46 2011] chipx,y range = (150.00-211.00, 913.00-976.00)
[Mon Oct  3 16:04:46 2011] Size of ../../acisf10096/products/events/fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211_bgd.evt.gz[events] = 19440 counts
[Mon Oct  3 16:04:46 2011] ../../acisf10096/products/images/fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211_src.img and ../../acisf10096/products/images/fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211_bgd.img exist, delete to re-create
[Mon Oct  3 16:04:46 2011] ../../acisf10096/products/spectra/fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211_src.pi and ../../acisf10096/products/spectra/fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211_bgd.pi exist, delete to re-create
[Mon Oct  3 16:04:49 2011] ../../acisf10096/products/lightcurves/fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211_src.lc and ../../acisf10096/products/lightcurves/fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211_bgd.lc exist, delete to re-create
[Mon Oct  3 16:15:17 2011] Keeping rmf generated by specextract
[Mon Oct  3 16:15:17 2011] 194.466
[Mon Oct  3 16:45:45 2011] Updating aperture counts using extracted products
[Mon Oct  3 16:45:46 2011] Error reading totcts from fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211_src.pi.gz
[Mon Oct  3 16:46:00 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 16:46:00 2011] Using photon index=1.80, rate=0.00235, arf fullrun_ccd2_acisf10096_pi14-548_pass1_cl_src211.arf
[Mon Oct  3 16:46:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 16:46:00 2011] Updating source flux to 3.4e-14