[Mon Oct  3 14:59:39 2011] Detection parameters:
  Position = (655.4, 1080.3) = 0 25 14.79 64 5 11.2
  Extent = 0.5" x 0.5", rotation angle = 33 degrees
  Source counts = 315.0 +/- 35.0
  Background counts = 910.0
  Rate = 0.003 +/- 0.0003

[Mon Oct  3 15:00:54 2011] Off-axis axis estimate = 3.43'
[Mon Oct  3 15:21:54 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:21:54 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Mon Oct  3 15:21:54 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.857
[Mon Oct  3 15:21:54 2011] Giving source the simple spatial ID 75 for pass 0, mean size = 0.67"
[Mon Oct  3 15:22:00 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass0_src75.ximg exists
[Mon Oct  3 15:22:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10096_pi14-548_cl_pass0_src75.csv
[Mon Oct  3 15:22:00 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass0_src75_1.ximg exists
[Mon Oct  3 15:22:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10096_pi14-548_cl_pass0_src75.csv
[Mon Oct  3 15:22:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10096_pi14-548_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10096_pi14-548_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:22:06 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass0_tfrozen_src75.ximg exists
[Mon Oct  3 15:22:06 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass0_tfrozen_src75_1.ximg exists
[Mon Oct  3 15:22:06 2011] Fit fullrun_ccd1_acisf10096_pi14-548_cl_pass0_tfrozen_src75 appears to have run properly
[Mon Oct  3 15:23:49 2011] Spatial fit model total counts = 3431.090000, observed total counts = 3423.000000
[Mon Oct  3 15:23:49 2011] Offset between fit and detection position for source 74 = 4.586310 pixels
[Mon Oct  3 15:23:49 2011] 3397.066000 total counts/ 3179.440000 bgd. counts: snr = 3.859539
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 4.586310 pixels
  Position = (650.8, 1080.4) = 0 25 15.17 64 5 11.0
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 217.6 +/- 58.3
  Background counts = 3179.4
  Rate = 0.002 +/- 0.0006
[Mon Oct  3 15:23:49 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:23:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:23:49 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:23:49 2011] Source does appear to be extended
[Mon Oct  3 15:23:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:26:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:26:24 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Mon Oct  3 15:26:24 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Mon Oct  3 15:26:24 2011] Giving source the simple spatial ID 73 for pass 1, mean size = 1.50"
[Mon Oct  3 15:26:54 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass1_src73.ximg exists
[Mon Oct  3 15:26:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10096_pi14-548_cl_pass1_src73.csv
[Mon Oct  3 15:26:54 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass1_src73_1.ximg exists
[Mon Oct  3 15:26:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10096_pi14-548_cl_pass1_src73.csv
[Mon Oct  3 15:26:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10096_pi14-548_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10096_pi14-548_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:27:30 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass1_tfrozen_src73.ximg exists
[Mon Oct  3 15:27:30 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass1_tfrozen_src73_1.ximg exists
[Mon Oct  3 15:27:30 2011] Fit fullrun_ccd1_acisf10096_pi14-548_cl_pass1_tfrozen_src73 appears to have run properly
[Mon Oct  3 15:29:37 2011] Spatial fit model total counts = 4149.980000, observed total counts = 4150.000000
[Mon Oct  3 15:29:37 2011] Offset between fit and detection position for source 74 = 5.520968 pixels
[Mon Oct  3 15:29:37 2011] 4012.220000 total counts/ 2842.030000 bgd. counts: snr = 21.950381
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 5.520968 pixels
  Position = (655.8, 1078.1) = 0 25 14.79 64 5 9.9
  Extent = 3.0 (3.0-3.0)", rotation angle = 0
  Source counts = 1170.2 +/- 63.3
  Background counts = 2842.0
  Rate = 0.01 +/- 0.0006
[Mon Oct  3 15:29:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:29:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:29:37 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:29:37 2011] Source does appear to be extended
[Mon Oct  3 15:29:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:29:37 2011] Source is confused with source 41
[Mon Oct  3 15:45:06 2011] Not overwriting source region fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74_src.reg
[Mon Oct  3 15:45:06 2011] Extracting stamp from image fullrun_ccd1_acisf10096_pi14-548_cl_sm2.00.img.gz, (519, 941) - (793, 1215)
[Mon Oct  3 15:45:06 2011] Writing fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74.gif
[Mon Oct  3 15:50:49 2011] ../../acisf10096/products/events/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74_src.evt and ../../acisf10096/products/events/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74_bgd.evt exist, delete to re-create
[Mon Oct  3 15:50:49 2011] Size of ../../acisf10096/products/events/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74_src.evt.gz[events] = 22776 counts
[Mon Oct  3 15:50:49 2011] Mean chipx,y = (215.61, 734.78)
[Mon Oct  3 15:50:49 2011] Mean tdetx,y = (4397.22, 4322.61)
[Mon Oct  3 15:50:49 2011] chipx,y range = (173.00-255.00, 694.00-779.00)
[Mon Oct  3 15:50:50 2011] Size of ../../acisf10096/products/events/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74_bgd.evt.gz[events] = 83735 counts
[Mon Oct  3 15:50:50 2011] ../../acisf10096/products/images/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74_src.img and ../../acisf10096/products/images/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74_bgd.img exist, delete to re-create
[Mon Oct  3 15:50:50 2011] ../../acisf10096/products/spectra/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74_src.pi and ../../acisf10096/products/spectra/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74_bgd.pi exist, delete to re-create
[Mon Oct  3 15:50:53 2011] ../../acisf10096/products/lightcurves/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74_src.lc and ../../acisf10096/products/lightcurves/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74_bgd.lc exist, delete to re-create
[Mon Oct  3 15:58:32 2011] Keeping rmf generated by specextract
[Mon Oct  3 15:58:32 2011] 198.489
[Mon Oct  3 16:45:21 2011] Updating aperture counts using extracted products
[Mon Oct  3 16:45:21 2011] Error reading totcts from fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74_src.pi.gz
[Mon Oct  3 16:45:33 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 16:45:33 2011] Using photon index=1.80, rate=0.0111, arf fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src74.arf
[Mon Oct  3 16:45:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 16:45:33 2011] Updating source flux to 1.5e-13
[Mon Oct  3 16:57:32 2011] Flag c found in src. 74 procflags, skipping spectral fitting