[Mon Oct  3 14:59:24 2011] Detection parameters:
  Position = (614.6, 1028.4) = 0 25 17.85 64 4 45.7
  Extent = 1.2" x 1.1", rotation angle = 143 degrees
  Source counts = 2309.2 +/- 80.1
  Background counts = 4106.8
  Rate = 0.02 +/- 0.0008

[Mon Oct  3 15:00:54 2011] Off-axis axis estimate = 3.79'
[Mon Oct  3 15:21:54 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:21:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 15:21:54 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Mon Oct  3 15:21:54 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.940
[Mon Oct  3 15:21:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.77"
[Mon Oct  3 15:21:56 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct  3 15:21:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10096_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 15:21:56 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct  3 15:21:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10096_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 15:21:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10096_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10096_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:22:00 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct  3 15:22:00 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct  3 15:22:00 2011] Fit fullrun_ccd1_acisf10096_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct  3 15:23:48 2011] Spatial fit model total counts = 4687.120000, observed total counts = 4684.000000
[Mon Oct  3 15:23:48 2011] Offset between fit and detection position for source 4 = 2.237123 pixels
[Mon Oct  3 15:23:48 2011] 4761.946000 total counts/ 3977.000000 bgd. counts: snr = 12.446922
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.237123 pixels
  Position = (616.0, 1026.7) = 0 25 17.78 64 4 44.6
  Extent = 1.5 (1.5-3.1)", rotation angle = 0
  Source counts = 784.9 +/- 69.0
  Background counts = 3977.0
  Rate = 0.007 +/- 0.0007
[Mon Oct  3 15:23:49 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:23:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:23:49 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:23:49 2011] Source does appear to be extended
[Mon Oct  3 15:23:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:26:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:26:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 15:26:24 2011] Initial guess for spatial extent in simple fitting = 1.54"
[Mon Oct  3 15:26:24 2011] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.066
[Mon Oct  3 15:26:24 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.54"
[Mon Oct  3 15:26:37 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct  3 15:26:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10096_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 15:26:37 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct  3 15:26:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10096_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 15:26:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10096_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10096_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:27:02 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct  3 15:27:04 2011] fullrun_ccd1_acisf10096_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct  3 15:27:04 2011] Fit fullrun_ccd1_acisf10096_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct  3 15:29:37 2011] Spatial fit model total counts = 9618.150000, observed total counts = 9616.000000
[Mon Oct  3 15:29:37 2011] Offset between fit and detection position for source 4 = 1.739401 pixels
[Mon Oct  3 15:29:37 2011] 9767.890000 total counts/ 8367.240000 bgd. counts: snr = 15.312232
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.739401 pixels
  Position = (614.9, 1028.0) = 0 25 17.87 64 4 45.3
  Extent = 2.1 (1.8-2.5)", rotation angle = 0
  Source counts = 1400.7 +/- 98.8
  Background counts = 8367.2
  Rate = 0.01 +/- 0.0009
[Mon Oct  3 15:29:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:29:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:29:37 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:29:37 2011] Source does appear to be extended
[Mon Oct  3 15:29:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:44:57 2011] Not overwriting source region fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_src.reg
[Mon Oct  3 15:44:57 2011] Extracting stamp from image fullrun_ccd1_acisf10096_pi14-548_cl_sm2.00.img.gz, (517, 930) - (713, 1126)
[Mon Oct  3 15:44:57 2011] Writing fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4.gif
[Mon Oct  3 15:45:43 2011] ../../acisf10096/products/events/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_src.evt and ../../acisf10096/products/events/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Mon Oct  3 15:45:43 2011] Size of ../../acisf10096/products/events/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_src.evt.gz[events] = 13966 counts
[Mon Oct  3 15:45:43 2011] Mean chipx,y = (276.24, 747.47)
[Mon Oct  3 15:45:43 2011] Mean tdetx,y = (4384.53, 4383.24)
[Mon Oct  3 15:45:43 2011] chipx,y range = (244.00-313.00, 713.00-784.00)
[Mon Oct  3 15:45:43 2011] Size of ../../acisf10096/products/events/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 18756 counts
[Mon Oct  3 15:45:43 2011] ../../acisf10096/products/images/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_src.img and ../../acisf10096/products/images/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Mon Oct  3 15:45:43 2011] ../../acisf10096/products/spectra/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_src.pi and ../../acisf10096/products/spectra/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Mon Oct  3 15:45:48 2011] ../../acisf10096/products/lightcurves/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_src.lc and ../../acisf10096/products/lightcurves/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Mon Oct  3 15:58:21 2011] Keeping rmf generated by specextract
[Mon Oct  3 15:58:23 2011] 197.614
[Mon Oct  3 16:45:16 2011] Updating aperture counts using extracted products
[Mon Oct  3 16:45:16 2011] Error reading totcts from fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_src.pi.gz
[Mon Oct  3 16:45:28 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 16:45:28 2011] Using photon index=1.80, rate=0.0132, arf fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4.arf
[Mon Oct  3 16:45:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 16:45:29 2011] Updating source flux to 1.9e-13
[Mon Oct  3 17:07:43 2011] Reading fit data from acisf10096/analysis//spectral/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_pl.csv
[Mon Oct  3 17:07:43 2011] Spectral fit parameter nH value = 3.38852e+21
[Mon Oct  3 17:07:43 2011] Spectral fit parameter PhoIndex value = 3.03041
[Mon Oct  3 17:07:43 2011] Failed to get F(0.3-8.0) from acisf10096/analysis//spectral/fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Mon Oct  3 17:07:43 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 17:07:43 2011] Using Nh = 3.4e+21, photon index=3.03, rate=0.0132, arf fullrun_ccd1_acisf10096_pi14-548_pass1_cl_src4.arf
[Mon Oct  3 17:07:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 17:07:43 2011] Updating source flux to 1.1e-13