[Mon Oct  3 14:58:39 2011] Detection parameters:
  Position = (1204.3, 634.5) = 0 25 41.29 64 5 47.2
  Extent = 0.9" x 0.9", rotation angle = 97 degrees
  Source counts = 166.1 +/- 26.1
  Background counts = 513.9
  Rate = 0.002 +/- 0.0002

[Mon Oct  3 14:59:23 2011] Off-axis axis estimate = 3.45'
[Mon Oct  3 15:21:27 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:21:27 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Mon Oct  3 15:21:27 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.846
[Mon Oct  3 15:21:27 2011] Giving source the simple spatial ID 55 for pass 0, mean size = 0.68"
[Mon Oct  3 15:21:48 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src55.ximg exists
[Mon Oct  3 15:21:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src55.csv
[Mon Oct  3 15:21:48 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src55_1.ximg exists
[Mon Oct  3 15:21:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src55.csv
[Mon Oct  3 15:21:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:21:52 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass0_tfrozen_src55.ximg exists
[Mon Oct  3 15:21:52 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass0_tfrozen_src55_1.ximg exists
[Mon Oct  3 15:21:52 2011] Fit fullrun_ccd0_acisf10096_pi14-548_cl_pass0_tfrozen_src55 appears to have run properly
[Mon Oct  3 15:23:33 2011] Spatial fit model total counts = 1347.890000, observed total counts = 1348.000000
[Mon Oct  3 15:23:33 2011] Offset between fit and detection position for source 59 = 1.276523 pixels
[Mon Oct  3 15:23:33 2011] 1377.780000 total counts/ 1175.730000 bgd. counts: snr = 5.892574
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 1.276523 pixels
  Position = (1203.3, 635.3) = 0 25 41.41 64 5 47.3
  Extent = 1.5 (1.5-1.5)", rotation angle = 0
  Source counts = 202.1 +/- 37.1
  Background counts = 1175.7
  Rate = 0.002 +/- 0.0004
[Mon Oct  3 15:23:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:23:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:23:33 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:23:33 2011] Source does appear to be extended
[Mon Oct  3 15:23:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:25:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:25:57 2011] Initial guess for spatial extent in simple fitting = 1.48"
[Mon Oct  3 15:25:57 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.991
[Mon Oct  3 15:25:57 2011] Giving source the simple spatial ID 53 for pass 1, mean size = 1.48"
[Mon Oct  3 15:26:08 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src53.ximg exists
[Mon Oct  3 15:26:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src53.csv
[Mon Oct  3 15:26:08 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src53_1.ximg exists
[Mon Oct  3 15:26:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src53.csv
[Mon Oct  3 15:26:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:26:19 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass1_tfrozen_src53.ximg exists
[Mon Oct  3 15:26:19 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass1_tfrozen_src53_1.ximg exists
[Mon Oct  3 15:26:19 2011] Fit fullrun_ccd0_acisf10096_pi14-548_cl_pass1_tfrozen_src53 appears to have run properly
[Mon Oct  3 15:29:21 2011] Spatial fit model total counts = 1663.690000, observed total counts = 1664.000000
[Mon Oct  3 15:29:21 2011] Offset between fit and detection position for source 59 = 0.238724 pixels
[Mon Oct  3 15:29:21 2011] 1705.242000 total counts/ 1501.980000 bgd. counts: snr = 5.244742
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.238724 pixels
  Position = (1203.1, 635.3) = 0 25 41.43 64 5 47.3
  Extent = 1.5 (1.0-2.4)", rotation angle = 0
  Source counts = 203.3 +/- 41.3
  Background counts = 1502.0
  Rate = 0.002 +/- 0.0004
[Mon Oct  3 15:29:21 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:29:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:29:21 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:29:21 2011] Source does appear to be extended
[Mon Oct  3 15:29:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:31:50 2011] Not overwriting source region fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59_src.reg
[Mon Oct  3 15:31:50 2011] Extracting stamp from image fullrun_ccd0_acisf10096_pi14-548_cl_sm2.00.img.gz, (1134, 567) - (1272, 704)
[Mon Oct  3 15:31:50 2011] Writing fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59.gif
[Mon Oct  3 15:36:49 2011] ../../acisf10096/products/events/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59_src.evt and ../../acisf10096/products/events/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59_bgd.evt exist, delete to re-create
[Mon Oct  3 15:36:49 2011] Size of ../../acisf10096/products/events/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59_src.evt.gz[events] = 2361 counts
[Mon Oct  3 15:36:49 2011] Mean chipx,y = (705.28, 987.50)
[Mon Oct  3 15:36:49 2011] Mean tdetx,y = (4048.50, 4426.72)
[Mon Oct  3 15:36:49 2011] chipx,y range = (675.00-733.00, 957.00-1016.00)
[Mon Oct  3 15:36:50 2011] Size of ../../acisf10096/products/events/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59_bgd.evt.gz[events] = 16525 counts
[Mon Oct  3 15:36:50 2011] ../../acisf10096/products/images/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59_src.img and ../../acisf10096/products/images/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59_bgd.img exist, delete to re-create
[Mon Oct  3 15:36:50 2011] ../../acisf10096/products/spectra/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59_src.pi and ../../acisf10096/products/spectra/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59_bgd.pi exist, delete to re-create
[Mon Oct  3 15:36:57 2011] ../../acisf10096/products/lightcurves/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59_src.lc and ../../acisf10096/products/lightcurves/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59_bgd.lc exist, delete to re-create
[Mon Oct  3 15:44:37 2011] Keeping rmf generated by specextract
[Mon Oct  3 15:44:37 2011] 195.719
[Mon Oct  3 16:45:03 2011] Updating aperture counts using extracted products
[Mon Oct  3 16:45:03 2011] Error reading totcts from fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59_src.pi.gz
[Mon Oct  3 16:45:11 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 16:45:11 2011] Using photon index=1.80, rate=0.00192, arf fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src59.arf
[Mon Oct  3 16:45:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 16:45:11 2011] Updating source flux to 2.7e-14