[Mon Oct  3 14:58:37 2011] Detection parameters:
  Position = (1053.3, 1028.7) = 0 25 52.69 64 9 1.0
  Extent = 0.5" x 0.5", rotation angle = 12 degrees
  Source counts = 762.1 +/- 39.4
  Background counts = 789.9
  Rate = 0.007 +/- 0.0004

[Mon Oct  3 14:59:23 2011] Off-axis axis estimate = 3.38'
[Mon Oct  3 15:21:27 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:21:27 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Mon Oct  3 15:21:27 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.171
[Mon Oct  3 15:21:27 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 0.66"
[Mon Oct  3 15:21:48 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src37.ximg exists
[Mon Oct  3 15:21:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src37.csv
[Mon Oct  3 15:21:48 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src37_1.ximg exists
[Mon Oct  3 15:21:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src37.csv
[Mon Oct  3 15:21:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:21:51 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Mon Oct  3 15:21:51 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Oct  3 15:21:51 2011] Fit fullrun_ccd0_acisf10096_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Mon Oct  3 15:23:32 2011] Spatial fit model total counts = 4038.550000, observed total counts = 4065.000000
[Mon Oct  3 15:23:32 2011] Offset between fit and detection position for source 41 = 4.338473 pixels
[Mon Oct  3 15:23:32 2011] 3885.144000 total counts/ 3211.440000 bgd. counts: snr = 11.888285
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 4.338473 pixels
  Position = (1054.8, 1032.8) = 0 25 52.62 64 9 2.8
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 673.7 +/- 62.3
  Background counts = 3211.4
  Rate = 0.006 +/- 0.0006
[Mon Oct  3 15:23:33 2011] Spatial fit model total counts = 3493.020000, observed total counts = 3492.000000
[Mon Oct  3 15:23:33 2011] Offset between fit and detection position for source 41 = 1.243214 pixels
[Mon Oct  3 15:23:33 2011] Warning, changing simple spatial fit ID from 37 to 39
[Mon Oct  3 15:23:33 2011] 3461.555000 total counts/ 2890.170000 bgd. counts: snr = 10.628382
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.243214 pixels
  Position = (1053.8, 1033.5) = 0 25 52.70 64 9 3.1
  Extent = 1.5 (1.5-1.5)", rotation angle = 0
  Source counts = 571.4 +/- 58.8
  Background counts = 2890.2
  Rate = 0.005 +/- 0.0006
[Mon Oct  3 15:23:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:23:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:23:33 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:23:33 2011] Source does appear to be extended
[Mon Oct  3 15:23:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:23:33 2011] Source is confused with source 43
[Mon Oct  3 15:25:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:25:57 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Mon Oct  3 15:25:57 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.974
[Mon Oct  3 15:25:57 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 1.50"
[Mon Oct  3 15:26:07 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src37.ximg exists
[Mon Oct  3 15:26:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src37.csv
[Mon Oct  3 15:26:07 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src37_1.ximg exists
[Mon Oct  3 15:26:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src37.csv
[Mon Oct  3 15:26:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:26:18 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Mon Oct  3 15:26:18 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Oct  3 15:26:18 2011] Fit fullrun_ccd0_acisf10096_pi14-548_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Oct  3 15:29:21 2011] Spatial fit model total counts = 7324.570000, observed total counts = 7334.000000
[Mon Oct  3 15:29:21 2011] Offset between fit and detection position for source 41 = 1.378831 pixels
[Mon Oct  3 15:29:21 2011] Warning, changing simple spatial fit ID from 37 to 34
[Mon Oct  3 15:29:21 2011] 6696.130000 total counts/ 6696.130000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.378831 pixels
  Position = (1052.7, 1032.7) = 0 25 52.78 64 9 2.7
  Extent = 0.4 (0.4-5.6)", rotation angle = 0
  Source counts = 0.0 +/- 81.8
  Background counts = 6696.1
  Rate = 6e-22 +/- 0.0008
  Deleting source due to low Poisson probability