[Mon Oct  3 14:58:34 2011] Detection parameters:
  Position = (1073.4, 837.6) = 0 25 51.16 64 7 27.0
  Extent = 0.5" x 0.5", rotation angle = 146 degrees
  Source counts = 137.7 +/- 31.2
  Background counts = 837.3
  Rate = 0.001 +/- 0.0003

[Mon Oct  3 14:59:23 2011] Off-axis axis estimate = 3.35'
[Mon Oct  3 15:21:27 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:21:27 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Mon Oct  3 15:21:27 2011] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.668
[Mon Oct  3 15:21:27 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.66"
[Mon Oct  3 15:21:46 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src16.ximg exists
[Mon Oct  3 15:21:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src16.csv
[Mon Oct  3 15:21:47 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src16_1.ximg exists
[Mon Oct  3 15:21:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src16.csv
[Mon Oct  3 15:21:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10096_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:21:50 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Mon Oct  3 15:21:50 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Oct  3 15:21:50 2011] Fit fullrun_ccd0_acisf10096_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Oct  3 15:23:32 2011] Spatial fit model total counts = 2288.000000, observed total counts = 2288.000000
[Mon Oct  3 15:23:32 2011] Offset between fit and detection position for source 17 = 2.217741 pixels
[Mon Oct  3 15:23:32 2011] 2271.418400 total counts/ 2173.470000 bgd. counts: snr = 2.100973
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.217741 pixels
  Position = (1072.0, 839.3) = 0 25 51.30 64 7 27.6
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source counts = 97.9 +/- 47.7
  Background counts = 2173.5
  Rate = 0.0009 +/- 0.0005
[Mon Oct  3 15:23:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:23:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:23:33 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:23:33 2011] Source does appear to be extended
[Mon Oct  3 15:23:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:25:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 15:25:57 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Mon Oct  3 15:25:57 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Mon Oct  3 15:25:57 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.76"
[Mon Oct  3 15:26:06 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src15.ximg exists
[Mon Oct  3 15:26:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src15.csv
[Mon Oct  3 15:26:06 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src15_1.ximg exists
[Mon Oct  3 15:26:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src15.csv
[Mon Oct  3 15:26:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10096_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 15:26:12 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon Oct  3 15:26:13 2011] fullrun_ccd0_acisf10096_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Oct  3 15:26:13 2011] Fit fullrun_ccd0_acisf10096_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Oct  3 15:29:21 2011] Spatial fit model total counts = 2264.000000, observed total counts = 2264.000000
[Mon Oct  3 15:29:21 2011] Offset between fit and detection position for source 17 = 0.197176 pixels
[Mon Oct  3 15:29:21 2011] 2251.079900 total counts/ 2163.620000 bgd. counts: snr = 1.880262
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.197176 pixels
  Position = (1071.8, 839.4) = 0 25 51.31 64 7 27.6
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 87.5 +/- 47.4
  Background counts = 2163.6
  Rate = 0.0008 +/- 0.0004
[Mon Oct  3 15:29:21 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 15:29:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 15:29:21 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 15:29:21 2011] Source does appear to be extended
[Mon Oct  3 15:29:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 15:31:44 2011] Not overwriting source region fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17_src.reg
[Mon Oct  3 15:31:44 2011] Extracting stamp from image fullrun_ccd0_acisf10096_pi14-548_cl_sm2.00.img.gz, (1039, 807) - (1104, 872)
[Mon Oct  3 15:31:44 2011] Writing fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17.gif
[Mon Oct  3 15:33:24 2011] ../../acisf10096/products/events/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17_src.evt and ../../acisf10096/products/events/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Mon Oct  3 15:33:24 2011] Size of ../../acisf10096/products/events/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17_src.evt.gz[events] = 962 counts
[Mon Oct  3 15:33:24 2011] Mean chipx,y = (818.42, 772.97)
[Mon Oct  3 15:33:24 2011] Mean tdetx,y = (3833.97, 4313.58)
[Mon Oct  3 15:33:24 2011] chipx,y range = (794.00-839.00, 749.00-795.00)
[Mon Oct  3 15:33:24 2011] Size of ../../acisf10096/products/events/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 8950 counts
[Mon Oct  3 15:33:24 2011] ../../acisf10096/products/images/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17_src.img and ../../acisf10096/products/images/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Mon Oct  3 15:33:24 2011] ../../acisf10096/products/spectra/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17_src.pi and ../../acisf10096/products/spectra/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Mon Oct  3 15:33:24 2011] Not generating rmf since there are only 87 counts
[Mon Oct  3 15:33:29 2011] ../../acisf10096/products/lightcurves/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17_src.lc and ../../acisf10096/products/lightcurves/fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Mon Oct  3 15:44:31 2011] 195.463
[Mon Oct  3 16:45:00 2011] Updating aperture counts using extracted products
[Mon Oct  3 16:45:00 2011] Error reading totcts from fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17_src.pi.gz
[Mon Oct  3 16:45:09 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 16:45:09 2011] Using photon index=1.80, rate=0.000827, arf fullrun_ccd0_acisf10096_pi14-548_pass1_cl_src17.arf
[Mon Oct  3 16:45:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 16:45:09 2011] Updating source flux to 1.2e-14
[Mon Oct  3 16:47:20 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting