[Mon Oct 24 12:10:35 2011] Detection parameters:
  Position = (697.7, 956.5) = 0 25 11.62 64 4 13.8
  Extent = 0.9" x 0.9", rotation angle = 178 degrees
  Source counts = 202.3 +/- 25.7
  Background counts = 459.7
  Rate = 0.002 +/- 0.0003

[Mon Oct 24 12:11:07 2011] Off-axis axis estimate = 4.44'
[Mon Oct 24 12:26:56 2011] Using EEF radius (= 0.97 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 12:26:56 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Mon Oct 24 12:26:56 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.020
[Mon Oct 24 12:26:56 2011] Giving source the simple spatial ID 83 for pass 0, mean size = 0.97"
[Mon Oct 24 12:27:09 2011] fullrun_ccd1_acisf10094_pi14-548_cl_pass0_src83.ximg exists
[Mon Oct 24 12:27:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10094_pi14-548_cl_pass0_src83.csv
[Mon Oct 24 12:27:09 2011] fullrun_ccd1_acisf10094_pi14-548_cl_pass0_src83_1.ximg exists
[Mon Oct 24 12:27:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10094_pi14-548_cl_pass0_src83.csv
[Mon Oct 24 12:27:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10094_pi14-548_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10094_pi14-548_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 12:27:11 2011] fullrun_ccd1_acisf10094_pi14-548_cl_pass0_tfrozen_src83.ximg exists
[Mon Oct 24 12:27:11 2011] fullrun_ccd1_acisf10094_pi14-548_cl_pass0_tfrozen_src83_1.ximg exists
[Mon Oct 24 12:27:11 2011] Fit fullrun_ccd1_acisf10094_pi14-548_cl_pass0_tfrozen_src83 appears to have run properly
[Mon Oct 24 12:28:19 2011] Spatial fit model total counts = 1151.690000, observed total counts = 1153.000000
[Mon Oct 24 12:28:19 2011] Offset between fit and detection position for source 140 = 2.256882 pixels
[Mon Oct 24 12:28:19 2011] 1152.347000 total counts/ 874.731000 bgd. counts: snr = 9.386577
Spatial fit parameters:
  Offset between fit and detection position for source 140 = 2.256882 pixels
  Position = (699.6, 957.7) = 0 25 11.52 64 4 14.1
  Extent = 1.9 (1.7-3.9)", rotation angle = 0
  Source counts = 277.6 +/- 33.9
  Background counts = 874.7
  Rate = 0.003 +/- 0.0004
[Mon Oct 24 12:28:19 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 12:28:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 12:28:19 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 12:28:19 2011] Source does appear to be extended
[Mon Oct 24 12:28:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 12:30:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 12:30:21 2011] Initial guess for spatial extent in simple fitting = 1.94"
[Mon Oct 24 12:30:21 2011] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.022
[Mon Oct 24 12:30:21 2011] Giving source the simple spatial ID 82 for pass 1, mean size = 1.94"
[Mon Oct 24 12:30:31 2011] fullrun_ccd1_acisf10094_pi14-548_cl_pass1_src82.ximg exists
[Mon Oct 24 12:30:31 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf10094_pi14-548_cl_pass1_src82.csv
[Mon Oct 24 12:30:31 2011] fullrun_ccd1_acisf10094_pi14-548_cl_pass1_src82_1.ximg exists
[Mon Oct 24 12:30:31 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf10094_pi14-548_cl_pass1_src82.csv
[Mon Oct 24 12:30:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10094_pi14-548_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10094_pi14-548_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 12:30:38 2011] fullrun_ccd1_acisf10094_pi14-548_cl_pass1_tfrozen_src82.ximg exists
[Mon Oct 24 12:30:38 2011] fullrun_ccd1_acisf10094_pi14-548_cl_pass1_tfrozen_src82_1.ximg exists
[Mon Oct 24 12:30:38 2011] Fit fullrun_ccd1_acisf10094_pi14-548_cl_pass1_tfrozen_src82 appears to have run properly
[Mon Oct 24 12:31:51 2011] Warning, spatial fit 82 centroid is now closest to src. 146
[Mon Oct 24 12:31:51 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 12:31:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 12:31:51 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 12:31:51 2011] Source does appear to be extended
[Mon Oct 24 12:31:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 12:40:06 2011] Not overwriting source region fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140_src.reg
[Mon Oct 24 12:40:06 2011] Extracting stamp from image fullrun_ccd1_acisf10094_pi14-548_cl_sm2.00.img.gz, (611, 869) - (788, 1047)
[Mon Oct 24 12:40:06 2011] Writing fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140.gif
[Mon Oct 24 12:44:15 2011] ../../acisf10094/products/events/fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140_src.evt and ../../acisf10094/products/events/fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140_bgd.evt exist, delete to re-create
[Mon Oct 24 12:44:15 2011] Size of ../../acisf10094/products/events/fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140_src.evt.gz[events] = 3674 counts
[Mon Oct 24 12:44:15 2011] Mean chipx,y = (290.57, 641.27)
[Mon Oct 24 12:44:15 2011] Mean tdetx,y = (4490.73, 4397.57)
[Mon Oct 24 12:44:15 2011] chipx,y range = (260.00-323.00, 610.00-675.00)
[Mon Oct 24 12:44:15 2011] Size of ../../acisf10094/products/events/fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140_bgd.evt.gz[events] = 17010 counts
[Mon Oct 24 12:44:15 2011] ../../acisf10094/products/images/fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140_src.img and ../../acisf10094/products/images/fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140_bgd.img exist, delete to re-create
[Mon Oct 24 12:44:15 2011] ../../acisf10094/products/spectra/fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140_src.pi and ../../acisf10094/products/spectra/fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140_bgd.pi exist, delete to re-create
[Mon Oct 24 12:44:18 2011] ../../acisf10094/products/lightcurves/fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140_src.lc and ../../acisf10094/products/lightcurves/fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140_bgd.lc exist, delete to re-create
[Mon Oct 24 12:49:33 2011] Keeping rmf generated by specextract
[Mon Oct 24 12:49:33 2011] 190.104
[Mon Oct 24 13:24:09 2011] Updating aperture counts using extracted products
[Mon Oct 24 13:24:09 2011] Error reading totcts from fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140_src.pi.gz
[Mon Oct 24 13:24:19 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 13:24:19 2011] Using photon index=1.80, rate=0.00309, arf fullrun_ccd1_acisf10094_pi14-548_pass1_cl_src140.arf
[Mon Oct 24 13:24:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 13:24:19 2011] Updating source flux to 4.5e-14