[Mon Sep 26 07:48:39 2011] Detection parameters:
  Position = (845.6, 1022.7) = 0 24 59.99 64 4 42.3
  Extent = 0.7" x 0.7", rotation angle = 31 degrees
  Source counts = 425.9 +/- 28.8
  Background counts = 405.1
  Rate = 0.004 +/- 0.0002

[Mon Sep 26 07:50:18 2011] Off-axis axis estimate = 4.51'
[Mon Sep 26 08:13:52 2011] Using EEF radius (= 1.00 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:13:52 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Mon Sep 26 08:13:52 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.980
[Mon Sep 26 08:13:52 2011] Giving source the simple spatial ID 52 for pass 0, mean size = 1.00"
[Mon Sep 26 08:13:55 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src52.ximg exists
[Mon Sep 26 08:13:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src52.csv
[Mon Sep 26 08:13:55 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src52_1.ximg exists
[Mon Sep 26 08:13:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src52.csv
[Mon Sep 26 08:13:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:13:58 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src52.ximg exists
[Mon Sep 26 08:13:58 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src52_1.ximg exists
[Mon Sep 26 08:13:58 2011] Fit fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src52 appears to have run properly
[Mon Sep 26 08:15:45 2011] Spatial fit model total counts = 1555.820000, observed total counts = 1556.000000
[Mon Sep 26 08:15:45 2011] Offset between fit and detection position for source 52 = 3.551928 pixels
[Mon Sep 26 08:15:45 2011] 1550.655000 total counts/ 1084.720000 bgd. counts: snr = 14.147070
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 3.551928 pixels
  Position = (848.5, 1024.8) = 0 24 59.82 64 4 43.1
  Extent = 2.0 (2.0-4.0)", rotation angle = 0
  Source counts = 465.9 +/- 39.4
  Background counts = 1084.7
  Rate = 0.004 +/- 0.0003
[Mon Sep 26 08:15:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:15:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:15:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:15:46 2011] Source does appear to be extended
[Mon Sep 26 08:15:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:18:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:18:13 2011] Initial guess for spatial extent in simple fitting = 1.99"
[Mon Sep 26 08:18:13 2011] source mask rpix=4.1, npix_max = 82, mask sum = 81, frac = 0.977
[Mon Sep 26 08:18:13 2011] Giving source the simple spatial ID 52 for pass 1, mean size = 1.99"
[Mon Sep 26 08:18:20 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src52.ximg exists
[Mon Sep 26 08:18:20 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src52.csv
[Mon Sep 26 08:18:20 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src52_1.ximg exists
[Mon Sep 26 08:18:20 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src52.csv
[Mon Sep 26 08:18:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:18:25 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_tfrozen_src52.ximg exists
[Mon Sep 26 08:18:25 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_tfrozen_src52_1.ximg exists
[Mon Sep 26 08:18:25 2011] Fit fullrun_ccd1_acisf10093_pi14-548_cl_pass1_tfrozen_src52 appears to have run properly
[Mon Sep 26 08:19:41 2011] Source 52 is offset by -3.143232 and -0.993551 pixels which is larger than
2 X fitted extent = 2.025862 x 2.025862, not incorporating fit results
[Mon Sep 26 08:19:41 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:19:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:19:41 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:19:41 2011] Source does appear to be extended
[Mon Sep 26 08:19:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:32:00 2011] Not overwriting source region fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52_src.reg
[Mon Sep 26 08:32:00 2011] Extracting stamp from image fullrun_ccd1_acisf10093_pi14-548_cl_sm2.00.img.gz, (757, 934) - (940, 1116)
[Mon Sep 26 08:32:00 2011] Writing fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52.gif
[Mon Sep 26 08:36:08 2011] ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52_src.evt and ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52_bgd.evt exist, delete to re-create
[Mon Sep 26 08:36:08 2011] Size of ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52_src.evt.gz[events] = 3994 counts
[Mon Sep 26 08:36:08 2011] Mean chipx,y = (157.04, 548.15)
[Mon Sep 26 08:36:08 2011] Mean tdetx,y = (4583.85, 4264.04)
[Mon Sep 26 08:36:08 2011] chipx,y range = (127.00-190.00, 515.00-577.00)
[Mon Sep 26 08:36:08 2011] Size of ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52_bgd.evt.gz[events] = 7515 counts
[Mon Sep 26 08:36:08 2011] ../../acisf10093/products/images/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52_src.img and ../../acisf10093/products/images/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52_bgd.img exist, delete to re-create
[Mon Sep 26 08:36:08 2011] ../../acisf10093/products/spectra/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52_src.pi and ../../acisf10093/products/spectra/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52_bgd.pi exist, delete to re-create
[Mon Sep 26 08:36:13 2011] ../../acisf10093/products/lightcurves/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52_src.lc and ../../acisf10093/products/lightcurves/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52_bgd.lc exist, delete to re-create
[Mon Sep 26 08:45:05 2011] Keeping rmf generated by specextract
[Mon Sep 26 08:45:05 2011] 194.9
[Mon Sep 26 09:38:59 2011] Updating aperture counts using extracted products
[Mon Sep 26 09:38:59 2011] Error reading totcts from fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52_src.pi.gz
[Mon Sep 26 09:39:12 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 09:39:12 2011] Using photon index=1.80, rate=0.00394, arf fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src52.arf
[Mon Sep 26 09:39:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 09:39:12 2011] Updating source flux to 5.6e-14
[Mon Sep 26 09:51:32 2011] Flag b found in src. 52 procflags, skipping spectral fitting