[Mon Sep 26 07:48:37 2011] Detection parameters:
  Position = (754.9, 1136.6) = 0 25 6.80 64 5 38.4
  Extent = 0.7" x 0.7", rotation angle = 34 degrees
  Source counts = 492.2 +/- 42.3
  Background counts = 1300.8
  Rate = 0.004 +/- 0.0004

[Mon Sep 26 07:50:18 2011] Off-axis axis estimate = 3.33'
[Mon Sep 26 08:13:52 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:13:52 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Mon Sep 26 08:13:52 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.903
[Mon Sep 26 08:13:52 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 0.65"
[Mon Sep 26 08:13:55 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src37.ximg exists
[Mon Sep 26 08:13:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src37.csv
[Mon Sep 26 08:13:55 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src37_1.ximg exists
[Mon Sep 26 08:13:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src37.csv
[Mon Sep 26 08:13:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:13:57 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Mon Sep 26 08:13:57 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Sep 26 08:13:57 2011] Fit fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Mon Sep 26 08:15:45 2011] Spatial fit model total counts = 2722.050000, observed total counts = 2720.000000
[Mon Sep 26 08:15:45 2011] Offset between fit and detection position for source 41 = 2.900076 pixels
[Mon Sep 26 08:15:45 2011] 2742.673000 total counts/ 2607.770000 bgd. counts: snr = 2.641721
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 2.900076 pixels
  Position = (757.6, 1137.6) = 0 25 6.63 64 5 38.6
  Extent = 0.8 (0.6-1.5)", rotation angle = 0
  Source counts = 134.9 +/- 52.4
  Background counts = 2607.8
  Rate = 0.001 +/- 0.0004
[Mon Sep 26 08:15:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:15:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:15:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:15:46 2011] Source does appear to be extended
[Mon Sep 26 08:15:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:18:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:18:13 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Mon Sep 26 08:18:13 2011] source mask rpix=1.6, npix_max = 17, mask sum = 25, frac = 1.397
[Mon Sep 26 08:18:13 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 0.79"
[Mon Sep 26 08:18:19 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src37.ximg exists
[Mon Sep 26 08:18:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src37.csv
[Mon Sep 26 08:18:19 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src37_1.ximg exists
[Mon Sep 26 08:18:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src37.csv
[Mon Sep 26 08:18:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:18:25 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Mon Sep 26 08:18:25 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Sep 26 08:18:25 2011] Fit fullrun_ccd1_acisf10093_pi14-548_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Sep 26 08:19:41 2011] Spatial fit model total counts = 2748.790000, observed total counts = 2760.000000
[Mon Sep 26 08:19:41 2011] Offset between fit and detection position for source 41 = 1.178067 pixels
[Mon Sep 26 08:19:41 2011] 2745.578000 total counts/ 2299.410000 bgd. counts: snr = 9.304439
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.178067 pixels
  Position = (758.6, 1138.2) = 0 25 6.56 64 5 39.0
  Extent = 1.6 (1.6-3.2)", rotation angle = 0
  Source counts = 446.2 +/- 52.4
  Background counts = 2299.4
  Rate = 0.004 +/- 0.0004
[Mon Sep 26 08:19:41 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:19:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:19:41 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:19:41 2011] Source does appear to be extended
[Mon Sep 26 08:19:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:19:41 2011] Source is confused with source 133
[Mon Sep 26 08:31:59 2011] Not overwriting source region fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41_src.reg
[Mon Sep 26 08:31:59 2011] Extracting stamp from image fullrun_ccd1_acisf10093_pi14-548_cl_sm2.00.img.gz, (686, 1066) - (831, 1211)
[Mon Sep 26 08:31:59 2011] Writing fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41.gif
[Mon Sep 26 08:35:09 2011] ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41_src.evt and ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41_bgd.evt exist, delete to re-create
[Mon Sep 26 08:35:09 2011] Size of ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41_src.evt.gz[events] = 5148 counts
[Mon Sep 26 08:35:09 2011] Mean chipx,y = (104.61, 679.35)
[Mon Sep 26 08:35:09 2011] Mean tdetx,y = (4452.65, 4211.61)
[Mon Sep 26 08:35:09 2011] chipx,y range = (78.00-133.00, 650.00-709.00)
[Mon Sep 26 08:35:09 2011] Size of ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41_bgd.evt.gz[events] = 32694 counts
[Mon Sep 26 08:35:09 2011] ../../acisf10093/products/images/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41_src.img and ../../acisf10093/products/images/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41_bgd.img exist, delete to re-create
[Mon Sep 26 08:35:09 2011] ../../acisf10093/products/spectra/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41_src.pi and ../../acisf10093/products/spectra/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41_bgd.pi exist, delete to re-create
[Mon Sep 26 08:35:12 2011] ../../acisf10093/products/lightcurves/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41_src.lc and ../../acisf10093/products/lightcurves/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41_bgd.lc exist, delete to re-create
[Mon Sep 26 08:45:04 2011] Keeping rmf generated by specextract
[Mon Sep 26 08:45:04 2011] 194.856
[Mon Sep 26 09:38:58 2011] Updating aperture counts using extracted products
[Mon Sep 26 09:38:58 2011] Error reading totcts from fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41_src.pi.gz
[Mon Sep 26 09:39:11 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 09:39:11 2011] Using photon index=1.80, rate=0.00377, arf fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src41.arf
[Mon Sep 26 09:39:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 09:39:11 2011] Updating source flux to 5.4e-14
[Mon Sep 26 09:51:32 2011] Flag c found in src. 41 procflags, skipping spectral fitting