[Mon Sep 26 07:49:21 2011] Detection parameters: Position = (556.7, 1205.7) = 0 25 21.67 64 6 12.5 Extent = 0.5" x 0.5", rotation angle = 131 degrees Source counts = 267.7 +/- 32.8 Background counts = 809.3 Rate = 0.002 +/- 0.0003 [Mon Sep 26 07:50:18 2011] Off-axis axis estimate = 2.32' [Mon Sep 26 08:13:52 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting [Mon Sep 26 08:13:52 2011] Initial guess for spatial extent in simple fitting = 0.47" [Mon Sep 26 08:13:52 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.073 [Mon Sep 26 08:13:52 2011] Giving source the simple spatial ID 80 for pass 0, mean size = 0.47" [Mon Sep 26 08:13:55 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src80.ximg exists [Mon Sep 26 08:13:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src80.csv [Mon Sep 26 08:13:55 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src80_1.ximg exists [Mon Sep 26 08:13:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src80.csv [Mon Sep 26 08:13:55 2011] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src80_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Sep 26 08:13:58 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src80.ximg exists [Mon Sep 26 08:13:58 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src80_1.ximg exists [Mon Sep 26 08:13:58 2011] Fit fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src80 appears to have run properly [Mon Sep 26 08:15:45 2011] Spatial fit model total counts = 2169.910000, observed total counts = 2169.000000 [Mon Sep 26 08:15:45 2011] Offset between fit and detection position for source 222 = 1.456822 pixels [Mon Sep 26 08:15:45 2011] 2186.691700 total counts/ 2133.290000 bgd. counts: snr = 1.156192 Spatial fit parameters: Offset between fit and detection position for source 222 = 1.456822 pixels Position = (558.0, 1206.3) = 0 25 21.61 64 6 12.5 Extent = 0.7 (0.3-1.5)", rotation angle = 0 Source counts = 53.4 +/- 46.8 Background counts = 2133.3 Rate = 0.0005 +/- 0.0004 Deleting source due to low Poisson probability