[Mon Sep 26 07:49:17 2011] Detection parameters:
  Position = (579.4, 1112.5) = 0 25 19.97 64 5 26.6
  Extent = 0.5" x 0.5", rotation angle = 76 degrees
  Source counts = 218.5 +/- 30.9
  Background counts = 736.5
  Rate = 0.002 +/- 0.0003

[Mon Sep 26 07:50:18 2011] Off-axis axis estimate = 3.09'
[Mon Sep 26 08:13:52 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:13:52 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Mon Sep 26 08:13:52 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.765
[Mon Sep 26 08:13:52 2011] Giving source the simple spatial ID 99 for pass 0, mean size = 0.60"
[Mon Sep 26 08:13:56 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src99.ximg exists
[Mon Sep 26 08:13:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src99.csv
[Mon Sep 26 08:13:56 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src99_1.ximg exists
[Mon Sep 26 08:13:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src99.csv
[Mon Sep 26 08:13:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:13:58 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src99.ximg exists
[Mon Sep 26 08:13:58 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src99_1.ximg exists
[Mon Sep 26 08:13:58 2011] Fit fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src99 appears to have run properly
[Mon Sep 26 08:15:46 2011] Source 195 is offset by -0.469262 and -2.118396 pixels which is larger than
2 X fitted extent = 2.013264 x 2.013264, not incorporating fit results
[Mon Sep 26 08:15:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:15:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:15:46 2011] Assessing source extent using major
[Mon Sep 26 08:15:46 2011] Source does appear to be extended
[Mon Sep 26 08:15:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:15:46 2011] Source is confused with source 68
[Mon Sep 26 08:18:13 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:18:13 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Mon Sep 26 08:18:13 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.765
[Mon Sep 26 08:18:13 2011] Giving source the simple spatial ID 96 for pass 1, mean size = 0.60"
[Mon Sep 26 08:18:22 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src96.ximg exists
[Mon Sep 26 08:18:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src96.csv
[Mon Sep 26 08:18:22 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src96_1.ximg exists
[Mon Sep 26 08:18:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src96.csv
[Mon Sep 26 08:18:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src96_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:18:26 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_tfrozen_src96.ximg exists
[Mon Sep 26 08:18:26 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_tfrozen_src96_1.ximg exists
[Mon Sep 26 08:18:26 2011] Fit fullrun_ccd1_acisf10093_pi14-548_cl_pass1_tfrozen_src96 appears to have run properly
[Mon Sep 26 08:19:41 2011] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 195 at 17.856226 pixels away
[Mon Sep 26 08:19:41 2011] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 195 at 21.357825 pixels away
[Mon Sep 26 08:19:41 2011] Source 195 is offset by -0.475277 and -2.096898 pixels which is larger than
2 X fitted extent = 2.037516 x 2.037516, not incorporating fit results
[Mon Sep 26 08:19:41 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:19:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:19:41 2011] Assessing source extent using major
[Mon Sep 26 08:19:41 2011] Source does appear to be extended
[Mon Sep 26 08:19:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:32:03 2011] Not overwriting source region fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195_src.reg
[Mon Sep 26 08:32:03 2011] Extracting stamp from image fullrun_ccd1_acisf10093_pi14-548_cl_sm2.00.img.gz, (557, 1090) - (602, 1135)
[Mon Sep 26 08:32:03 2011] Writing fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195.gif
[Mon Sep 26 08:38:50 2011] ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195_src.evt and ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195_bgd.evt exist, delete to re-create
[Mon Sep 26 08:38:50 2011] Size of ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195_src.evt.gz[events] = 667 counts
[Mon Sep 26 08:38:50 2011] Mean chipx,y = (213.06, 823.40)
[Mon Sep 26 08:38:50 2011] Mean tdetx,y = (4308.60, 4320.06)
[Mon Sep 26 08:38:50 2011] chipx,y range = (194.00-234.00, 803.00-843.00)
[Mon Sep 26 08:38:50 2011] Size of ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195_bgd.evt.gz[events] = 902 counts
[Mon Sep 26 08:38:50 2011] ../../acisf10093/products/images/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195_src.img and ../../acisf10093/products/images/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195_bgd.img exist, delete to re-create
[Mon Sep 26 08:38:50 2011] ../../acisf10093/products/spectra/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195_src.pi and ../../acisf10093/products/spectra/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195_bgd.pi exist, delete to re-create
[Mon Sep 26 08:38:50 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Sep 26 08:38:53 2011] ../../acisf10093/products/lightcurves/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195_src.lc and ../../acisf10093/products/lightcurves/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195_bgd.lc exist, delete to re-create
[Mon Sep 26 08:45:08 2011] Keeping rmf generated by specextract
[Mon Sep 26 08:45:08 2011] 200.937
[Mon Sep 26 09:39:02 2011] Updating aperture counts using extracted products
[Mon Sep 26 09:39:02 2011] Error reading totcts from fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195_src.pi.gz
[Mon Sep 26 09:39:15 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 09:39:15 2011] Using photon index=1.80, rate=0.00185, arf fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src195.arf
[Mon Sep 26 09:39:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 09:39:15 2011] Updating source flux to 2.6e-14
[Mon Sep 26 09:51:32 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting