[Mon Sep 26 07:49:15 2011] Detection parameters:
  Position = (865.3, 1077.5) = 0 24 58.51 64 5 9.2
  Extent = 0.7" x 0.7", rotation angle = 118 degrees
  Source counts = 255.5 +/- 26.5
  Background counts = 445.5
  Rate = 0.002 +/- 0.0002

[Mon Sep 26 07:50:18 2011] Off-axis axis estimate = 4.23'
[Mon Sep 26 08:13:52 2011] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:13:52 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Mon Sep 26 08:13:52 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.145
[Mon Sep 26 08:13:52 2011] Giving source the simple spatial ID 87 for pass 0, mean size = 0.90"
[Mon Sep 26 08:13:55 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src87.ximg exists
[Mon Sep 26 08:13:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src87.csv
[Mon Sep 26 08:13:55 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src87_1.ximg exists
[Mon Sep 26 08:13:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src87.csv
[Mon Sep 26 08:13:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:13:58 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src87.ximg exists
[Mon Sep 26 08:13:58 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src87_1.ximg exists
[Mon Sep 26 08:13:58 2011] Fit fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src87 appears to have run properly
[Mon Sep 26 08:15:45 2011] Spatial fit model total counts = 3970.580000, observed total counts = 3988.000000
[Mon Sep 26 08:15:45 2011] Offset between fit and detection position for source 185 = 4.036629 pixels
[Mon Sep 26 08:15:45 2011] Warning, changing simple spatial fit ID from 87 to 66
[Mon Sep 26 08:15:45 2011] 3784.490100 total counts/ 3689.740000 bgd. counts: snr = 1.559846
Spatial fit parameters:
  Offset between fit and detection position for source 185 = 4.036629 pixels
  Position = (867.1, 1081.1) = 0 24 58.41 64 5 10.8
  Extent = 1.2 (0.7-1.7)", rotation angle = 0
  Source counts = 94.8 +/- 61.5
  Background counts = 3689.7
  Rate = 0.0008 +/- 0.0005
  Deleting source due to low Poisson probability