[Mon Sep 26 07:48:34 2011] Detection parameters:
  Position = (675.5, 1025.6) = 0 25 12.76 64 4 43.8
  Extent = 0.7" x 0.7", rotation angle = 45 degrees
  Source counts = 605.4 +/- 45.7
  Background counts = 1485.6
  Rate = 0.005 +/- 0.0004

[Mon Sep 26 07:50:18 2011] Off-axis axis estimate = 3.92'
[Mon Sep 26 08:13:52 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:13:52 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Mon Sep 26 08:13:52 2011] source mask rpix=1.6, npix_max = 18, mask sum = 25, frac = 1.363
[Mon Sep 26 08:13:52 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.81"
[Mon Sep 26 08:13:54 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src28.ximg exists
[Mon Sep 26 08:13:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src28.csv
[Mon Sep 26 08:13:54 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src28_1.ximg exists
[Mon Sep 26 08:13:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src28.csv
[Mon Sep 26 08:13:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10093_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:13:57 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Mon Sep 26 08:13:57 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Sep 26 08:13:57 2011] Fit fullrun_ccd1_acisf10093_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Mon Sep 26 08:15:45 2011] Spatial fit model total counts = 3939.990000, observed total counts = 3940.000000
[Mon Sep 26 08:15:45 2011] Offset between fit and detection position for source 17 = 3.659136 pixels
[Mon Sep 26 08:15:45 2011] 3917.556000 total counts/ 3533.510000 bgd. counts: snr = 6.460708
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 3.659136 pixels
  Position = (676.5, 1029.1) = 0 25 12.72 64 4 45.3
  Extent = 1.6 (1.6-3.2)", rotation angle = 0
  Source counts = 384.0 +/- 62.6
  Background counts = 3533.5
  Rate = 0.003 +/- 0.0005
[Mon Sep 26 08:15:46 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:15:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:15:46 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:15:46 2011] Source does appear to be extended
[Mon Sep 26 08:15:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:18:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:18:13 2011] Initial guess for spatial extent in simple fitting = 1.62"
[Mon Sep 26 08:18:13 2011] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.978
[Mon Sep 26 08:18:13 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 1.62"
[Mon Sep 26 08:18:19 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src28.ximg exists
[Mon Sep 26 08:18:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src28.csv
[Mon Sep 26 08:18:19 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src28_1.ximg exists
[Mon Sep 26 08:18:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src28.csv
[Mon Sep 26 08:18:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10093_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:18:25 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Mon Sep 26 08:18:25 2011] fullrun_ccd1_acisf10093_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Sep 26 08:18:25 2011] Fit fullrun_ccd1_acisf10093_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Sep 26 08:19:41 2011] Spatial fit model total counts = 6083.730000, observed total counts = 6087.000000
[Mon Sep 26 08:19:41 2011] Offset between fit and detection position for source 17 = 0.949801 pixels
[Mon Sep 26 08:19:41 2011] 6087.907000 total counts/ 5725.020000 bgd. counts: snr = 4.796041
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.949801 pixels
  Position = (676.0, 1028.3) = 0 25 12.76 64 4 44.9
  Extent = 1.6 (1.1-2.1)", rotation angle = 0
  Source counts = 362.9 +/- 78.0
  Background counts = 5725.0
  Rate = 0.003 +/- 0.0007
[Mon Sep 26 08:19:41 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:19:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:19:41 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:19:41 2011] Source does appear to be extended
[Mon Sep 26 08:19:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:31:59 2011] Not overwriting source region fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17_src.reg
[Mon Sep 26 08:31:59 2011] Extracting stamp from image fullrun_ccd1_acisf10093_pi14-548_cl_sm2.00.img.gz, (604, 956) - (748, 1100)
[Mon Sep 26 08:31:59 2011] Writing fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17.gif
[Mon Sep 26 08:34:32 2011] ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17_src.evt and ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Mon Sep 26 08:34:32 2011] Size of ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17_src.evt.gz[events] = 7635 counts
[Mon Sep 26 08:34:32 2011] Mean chipx,y = (239.87, 697.80)
[Mon Sep 26 08:34:32 2011] Mean tdetx,y = (4434.20, 4346.87)
[Mon Sep 26 08:34:32 2011] chipx,y range = (212.00-270.00, 668.00-727.00)
[Mon Sep 26 08:34:32 2011] Size of ../../acisf10093/products/events/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 36076 counts
[Mon Sep 26 08:34:32 2011] ../../acisf10093/products/images/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17_src.img and ../../acisf10093/products/images/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Mon Sep 26 08:34:32 2011] ../../acisf10093/products/spectra/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17_src.pi and ../../acisf10093/products/spectra/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Mon Sep 26 08:34:36 2011] ../../acisf10093/products/lightcurves/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17_src.lc and ../../acisf10093/products/lightcurves/fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Mon Sep 26 08:45:03 2011] Keeping rmf generated by specextract
[Mon Sep 26 08:45:03 2011] 197.717
[Mon Sep 26 09:38:57 2011] Updating aperture counts using extracted products
[Mon Sep 26 09:38:57 2011] Error reading totcts from fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17_src.pi.gz
[Mon Sep 26 09:39:10 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 09:39:10 2011] Using photon index=1.80, rate=0.00307, arf fullrun_ccd1_acisf10093_pi14-548_pass1_cl_src17.arf
[Mon Sep 26 09:39:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 09:39:10 2011] Updating source flux to 4.3e-14