[Mon Sep 26 07:47:39 2011] Detection parameters: Position = (1219.7, 641.4) = 0 25 39.85 64 5 44.2 Extent = 0.5" x 0.5", rotation angle = 65 degrees Source counts = 140.7 +/- 20.8 Background counts = 292.3 Rate = 0.001 +/- 0.0002 [Mon Sep 26 07:48:28 2011] Off-axis axis estimate = 3.40' [Mon Sep 26 08:13:31 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting [Mon Sep 26 08:13:31 2011] Initial guess for spatial extent in simple fitting = 0.67" [Mon Sep 26 08:13:31 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.871 [Mon Sep 26 08:13:31 2011] Giving source the simple spatial ID 75 for pass 0, mean size = 0.67" [Mon Sep 26 08:13:34 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src75.ximg exists [Mon Sep 26 08:13:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src75.csv [Mon Sep 26 08:13:34 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src75_1.ximg exists [Mon Sep 26 08:13:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src75.csv [Mon Sep 26 08:13:34 2011] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src75_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Sep 26 08:13:44 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_tfrozen_src75.ximg exists [Mon Sep 26 08:13:45 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_tfrozen_src75_1.ximg exists [Mon Sep 26 08:13:45 2011] Fit fullrun_ccd0_acisf10093_pi14-548_cl_pass0_tfrozen_src75 appears to have run properly [Mon Sep 26 08:15:30 2011] Spatial fit model total counts = 1900.230000, observed total counts = 1904.000000 [Mon Sep 26 08:15:30 2011] Offset between fit and detection position for source 82 = 0.653688 pixels [Mon Sep 26 08:15:30 2011] 1926.444600 total counts/ 1883.590000 bgd. counts: snr = 0.987425 Spatial fit parameters: Offset between fit and detection position for source 82 = 0.653688 pixels Position = (1220.3, 641.6) = 0 25 39.84 64 5 44.1 Extent = 0.6 (0.3-1.5)", rotation angle = 0 Source counts = 42.9 +/- 43.9 Background counts = 1883.6 Rate = 0.0004 +/- 0.0004 Deleting source due to low Poisson probability