[Mon Sep 26 07:47:33 2011] Detection parameters:
  Position = (1051.5, 766.5) = 0 25 52.49 64 6 45.6
  Extent = 0.5" x 0.5", rotation angle = 146 degrees
  Source counts = 392.5 +/- 40.4
  Background counts = 1243.5
  Rate = 0.003 +/- 0.0003

[Mon Sep 26 07:48:28 2011] Off-axis axis estimate = 3.76'
[Mon Sep 26 08:13:31 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:13:31 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Mon Sep 26 08:13:31 2011] source mask rpix=1.5, npix_max = 16, mask sum = 25, frac = 1.491
[Mon Sep 26 08:13:31 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 0.76"
[Mon Sep 26 08:13:33 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src37.ximg exists
[Mon Sep 26 08:13:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src37.csv
[Mon Sep 26 08:13:33 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src37_1.ximg exists
[Mon Sep 26 08:13:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src37.csv
[Mon Sep 26 08:13:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:13:37 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Mon Sep 26 08:13:37 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Sep 26 08:13:37 2011] Fit fullrun_ccd0_acisf10093_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Mon Sep 26 08:15:30 2011] Spatial fit model total counts = 3315.710000, observed total counts = 3316.000000
[Mon Sep 26 08:15:30 2011] Offset between fit and detection position for source 42 = 3.533421 pixels
[Mon Sep 26 08:15:30 2011] 3290.764000 total counts/ 2936.960000 bgd. counts: snr = 6.528505
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 3.533421 pixels
  Position = (1052.4, 769.9) = 0 25 52.46 64 6 47.1
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 353.8 +/- 57.4
  Background counts = 2937.0
  Rate = 0.003 +/- 0.0005
[Mon Sep 26 08:15:30 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:15:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:15:30 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:15:30 2011] Source does appear to be extended
[Mon Sep 26 08:15:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:17:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:17:56 2011] Initial guess for spatial extent in simple fitting = 1.52"
[Mon Sep 26 08:17:56 2011] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.083
[Mon Sep 26 08:17:56 2011] Giving source the simple spatial ID 38 for pass 1, mean size = 1.52"
[Mon Sep 26 08:18:01 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src38.ximg exists
[Mon Sep 26 08:18:01 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src38.csv
[Mon Sep 26 08:18:01 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src38_1.ximg exists
[Mon Sep 26 08:18:01 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src38.csv
[Mon Sep 26 08:18:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:18:08 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass1_tfrozen_src38.ximg exists
[Mon Sep 26 08:18:08 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass1_tfrozen_src38_1.ximg exists
[Mon Sep 26 08:18:08 2011] Fit fullrun_ccd0_acisf10093_pi14-548_cl_pass1_tfrozen_src38 appears to have run properly
[Mon Sep 26 08:19:24 2011] Spatial fit model total counts = 4393.600000, observed total counts = 4402.000000
[Mon Sep 26 08:19:24 2011] Offset between fit and detection position for source 42 = 0.318248 pixels
[Mon Sep 26 08:19:24 2011] 4386.050000 total counts/ 4104.940000 bgd. counts: snr = 4.387558
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.318248 pixels
  Position = (1052.2, 769.7) = 0 25 52.48 64 6 47.0
  Extent = 1.5 (1.1-3.0)", rotation angle = 0
  Source counts = 281.1 +/- 66.2
  Background counts = 4104.9
  Rate = 0.002 +/- 0.0006
[Mon Sep 26 08:19:24 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:19:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:19:24 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:19:24 2011] Source does appear to be extended
[Mon Sep 26 08:19:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:22:00 2011] Not overwriting source region fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42_src.reg
[Mon Sep 26 08:22:00 2011] Extracting stamp from image fullrun_ccd0_acisf10093_pi14-548_cl_sm2.00.img.gz, (984, 701) - (1120, 838)
[Mon Sep 26 08:22:00 2011] Writing fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42.gif
[Mon Sep 26 08:25:42 2011] ../../acisf10093/products/events/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42_src.evt and ../../acisf10093/products/events/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42_bgd.evt exist, delete to re-create
[Mon Sep 26 08:25:42 2011] Size of ../../acisf10093/products/events/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42_src.evt.gz[events] = 5596 counts
[Mon Sep 26 08:25:42 2011] Mean chipx,y = (742.60, 790.65)
[Mon Sep 26 08:25:42 2011] Mean tdetx,y = (3851.65, 4389.40)
[Mon Sep 26 08:25:42 2011] chipx,y range = (715.00-771.00, 762.00-818.00)
[Mon Sep 26 08:25:42 2011] Size of ../../acisf10093/products/events/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42_bgd.evt.gz[events] = 37262 counts
[Mon Sep 26 08:25:42 2011] ../../acisf10093/products/images/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42_src.img and ../../acisf10093/products/images/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42_bgd.img exist, delete to re-create
[Mon Sep 26 08:25:42 2011] ../../acisf10093/products/spectra/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42_src.pi and ../../acisf10093/products/spectra/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42_bgd.pi exist, delete to re-create
[Mon Sep 26 08:25:46 2011] ../../acisf10093/products/lightcurves/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42_src.lc and ../../acisf10093/products/lightcurves/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42_bgd.lc exist, delete to re-create
[Mon Sep 26 08:31:45 2011] Keeping rmf generated by specextract
[Mon Sep 26 08:31:45 2011] 194.058
[Mon Sep 26 09:38:40 2011] Updating aperture counts using extracted products
[Mon Sep 26 09:38:40 2011] Error reading totcts from fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42_src.pi.gz
[Mon Sep 26 09:38:49 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 09:38:49 2011] Using photon index=1.80, rate=0.00238, arf fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src42.arf
[Mon Sep 26 09:38:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 09:38:50 2011] Updating source flux to 3.4e-14