[Mon Sep 26 07:47:41 2011] Detection parameters:
  Position = (1242.3, 766.5) = 0 25 38.15 64 6 45.7
  Extent = 0.5" x 0.5", rotation angle = 54 degrees
  Source counts = 142.6 +/- 23.8
  Background counts = 424.4
  Rate = 0.001 +/- 0.0002

[Mon Sep 26 07:48:28 2011] Off-axis axis estimate = 2.49'
[Mon Sep 26 08:13:31 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:13:31 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Mon Sep 26 08:13:31 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.003
[Mon Sep 26 08:13:31 2011] Giving source the simple spatial ID 95 for pass 0, mean size = 0.49"
[Mon Sep 26 08:13:34 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src95.ximg exists
[Mon Sep 26 08:13:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src95.csv
[Mon Sep 26 08:13:34 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src95_1.ximg exists
[Mon Sep 26 08:13:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src95.csv
[Mon Sep 26 08:13:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:13:52 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_tfrozen_src95.ximg exists
[Mon Sep 26 08:13:52 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_tfrozen_src95_1.ximg exists
[Mon Sep 26 08:13:52 2011] Fit fullrun_ccd0_acisf10093_pi14-548_cl_pass0_tfrozen_src95 appears to have run properly
[Mon Sep 26 08:15:30 2011] Spatial fit model total counts = 1730.310000, observed total counts = 1731.000000
[Mon Sep 26 08:15:30 2011] Offset between fit and detection position for source 102 = 1.663621 pixels
[Mon Sep 26 08:15:30 2011] 1742.111000 total counts/ 1524.020000 bgd. counts: snr = 5.586534
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 1.663621 pixels
  Position = (1240.9, 767.3) = 0 25 38.30 64 6 45.9
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 218.1 +/- 41.7
  Background counts = 1524.0
  Rate = 0.002 +/- 0.0004
[Mon Sep 26 08:15:30 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:15:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:15:30 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:15:30 2011] Source does appear to be extended
[Mon Sep 26 08:15:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:17:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:17:56 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Mon Sep 26 08:17:56 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Mon Sep 26 08:17:56 2011] Giving source the simple spatial ID 83 for pass 1, mean size = 1.50"
[Mon Sep 26 08:18:04 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src83.ximg exists
[Mon Sep 26 08:18:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src83.csv
[Mon Sep 26 08:18:04 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src83_1.ximg exists
[Mon Sep 26 08:18:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src83.csv
[Mon Sep 26 08:18:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:18:12 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass1_tfrozen_src83.ximg exists
[Mon Sep 26 08:18:12 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass1_tfrozen_src83_1.ximg exists
[Mon Sep 26 08:18:12 2011] Fit fullrun_ccd0_acisf10093_pi14-548_cl_pass1_tfrozen_src83 appears to have run properly
[Mon Sep 26 08:19:24 2011] Spatial fit model total counts = 2388.990000, observed total counts = 2389.000000
[Mon Sep 26 08:19:24 2011] Offset between fit and detection position for source 102 = 1.842165 pixels
[Mon Sep 26 08:19:24 2011] 2374.581000 total counts/ 1668.080000 bgd. counts: snr = 17.298337
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 1.842165 pixels
  Position = (1242.4, 768.3) = 0 25 38.18 64 6 46.4
  Extent = 2.9 (2.8-3.0)", rotation angle = 0
  Source counts = 706.5 +/- 48.7
  Background counts = 1668.1
  Rate = 0.006 +/- 0.0004
[Mon Sep 26 08:19:24 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:19:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:19:24 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:19:24 2011] Source does appear to be extended
[Mon Sep 26 08:19:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:22:02 2011] Not overwriting source region fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102_src.reg
[Mon Sep 26 08:22:02 2011] Extracting stamp from image fullrun_ccd0_acisf10093_pi14-548_cl_sm2.00.img.gz, (1109, 635) - (1376, 901)
[Mon Sep 26 08:22:02 2011] Writing fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102.gif
[Mon Sep 26 08:28:41 2011] ../../acisf10093/products/events/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102_src.evt and ../../acisf10093/products/events/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102_bgd.evt exist, delete to re-create
[Mon Sep 26 08:28:42 2011] Size of ../../acisf10093/products/events/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102_src.evt.gz[events] = 11163 counts
[Mon Sep 26 08:28:42 2011] Mean chipx,y = (835.07, 956.80)
[Mon Sep 26 08:28:42 2011] Mean tdetx,y = (4017.80, 4296.93)
[Mon Sep 26 08:28:42 2011] chipx,y range = (795.00-874.00, 917.00-997.00)
[Mon Sep 26 08:28:42 2011] Size of ../../acisf10093/products/events/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102_bgd.evt.gz[events] = 69833 counts
[Mon Sep 26 08:28:42 2011] ../../acisf10093/products/images/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102_src.img and ../../acisf10093/products/images/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102_bgd.img exist, delete to re-create
[Mon Sep 26 08:28:42 2011] ../../acisf10093/products/spectra/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102_src.pi and ../../acisf10093/products/spectra/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102_bgd.pi exist, delete to re-create
[Mon Sep 26 08:28:45 2011] ../../acisf10093/products/lightcurves/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102_src.lc and ../../acisf10093/products/lightcurves/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102_bgd.lc exist, delete to re-create
[Mon Sep 26 08:31:50 2011] Keeping rmf generated by specextract
[Mon Sep 26 08:31:50 2011] 201.042
[Mon Sep 26 09:38:43 2011] Updating aperture counts using extracted products
[Mon Sep 26 09:38:43 2011] Error reading totcts from fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102_src.pi.gz
[Mon Sep 26 09:38:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 09:38:53 2011] Using photon index=1.80, rate=0.00597, arf fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src102.arf
[Mon Sep 26 09:38:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 09:38:53 2011] Updating source flux to 8.3e-14