[Mon Sep 26 07:47:28 2011] Detection parameters:
  Position = (1032.6, 936.7) = 0 25 53.93 64 8 9.3
  Extent = 1.0" x 0.9", rotation angle = 77 degrees
  Source counts = 6361.3 +/- 104.6
  Background counts = 4573.7
  Rate = 0.05 +/- 0.0009

[Mon Sep 26 07:48:28 2011] Off-axis axis estimate = 3.50'
[Mon Sep 26 08:13:31 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:13:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 08:13:31 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Mon Sep 26 08:13:31 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.100
[Mon Sep 26 08:13:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.69"
[Mon Sep 26 08:13:32 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 08:13:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 08:13:32 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 08:13:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 08:13:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10093_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:13:34 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 08:13:34 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 08:13:34 2011] Fit fullrun_ccd0_acisf10093_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 08:15:30 2011] Spatial fit model total counts = 6388.050000, observed total counts = 6389.000000
[Mon Sep 26 08:15:30 2011] Offset between fit and detection position for source 1 = 3.986069 pixels
[Mon Sep 26 08:15:30 2011] 6287.770000 total counts/ 4798.620000 bgd. counts: snr = 21.497119
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.986069 pixels
  Position = (1034.4, 940.2) = 0 25 53.84 64 8 10.8
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 1489.2 +/- 79.3
  Background counts = 4798.6
  Rate = 0.01 +/- 0.0007
[Mon Sep 26 08:15:30 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:15:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:15:30 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:15:30 2011] Source does appear to be extended
[Mon Sep 26 08:15:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:17:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 08:17:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 08:17:56 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Mon Sep 26 08:17:56 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Mon Sep 26 08:17:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Mon Sep 26 08:17:59 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 08:17:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 08:17:59 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 08:17:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 08:17:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10093_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 08:18:06 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 08:18:06 2011] fullrun_ccd0_acisf10093_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 08:18:06 2011] Fit fullrun_ccd0_acisf10093_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 08:19:24 2011] Spatial fit model total counts = 11389.800000, observed total counts = 11366.000000
[Mon Sep 26 08:19:24 2011] Offset between fit and detection position for source 1 = 0.903084 pixels
[Mon Sep 26 08:19:24 2011] 11197.000000 total counts/ 8608.500000 bgd. counts: snr = 27.898730
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.903084 pixels
  Position = (1033.9, 939.5) = 0 25 53.87 64 8 10.5
  Extent = 2.0 (1.9-2.3)", rotation angle = 0
  Source counts = 2588.5 +/- 105.8
  Background counts = 8608.5
  Rate = 0.02 +/- 0.0009
[Mon Sep 26 08:19:24 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 08:19:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 08:19:24 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 08:19:24 2011] Source does appear to be extended
[Mon Sep 26 08:19:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 08:21:56 2011] Not overwriting source region fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_src.reg
[Mon Sep 26 08:21:56 2011] Extracting stamp from image fullrun_ccd0_acisf10093_pi14-548_cl_sm2.00.img.gz, (941, 847) - (1127, 1032)
[Mon Sep 26 08:21:56 2011] Writing fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1.gif
[Mon Sep 26 08:22:37 2011] ../../acisf10093/products/events/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_src.evt and ../../acisf10093/products/events/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Sep 26 08:22:37 2011] Size of ../../acisf10093/products/events/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_src.evt.gz[events] = 15171 counts
[Mon Sep 26 08:22:37 2011] Mean chipx,y = (882.29, 690.86)
[Mon Sep 26 08:22:37 2011] Mean tdetx,y = (3751.86, 4249.71)
[Mon Sep 26 08:22:37 2011] chipx,y range = (850.00-915.00, 657.00-724.00)
[Mon Sep 26 08:22:37 2011] Size of ../../acisf10093/products/events/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 40354 counts
[Mon Sep 26 08:22:38 2011] ../../acisf10093/products/images/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_src.img and ../../acisf10093/products/images/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Sep 26 08:22:38 2011] ../../acisf10093/products/spectra/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_src.pi and ../../acisf10093/products/spectra/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Sep 26 08:22:43 2011] ../../acisf10093/products/lightcurves/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_src.lc and ../../acisf10093/products/lightcurves/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Sep 26 08:31:41 2011] Keeping rmf generated by specextract
[Mon Sep 26 08:31:41 2011] 193.83
[Mon Sep 26 09:38:37 2011] Updating aperture counts using extracted products
[Mon Sep 26 09:38:37 2011] Error reading totcts from fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Sep 26 09:38:47 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 09:38:47 2011] Using photon index=1.80, rate=0.0219, arf fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1.arf
[Mon Sep 26 09:38:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 09:38:47 2011] Updating source flux to 3.1e-13
[Mon Sep 26 09:51:32 2011] Reading fit data from acisf10093/analysis//spectral/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_pl.csv
[Mon Sep 26 09:51:32 2011] Spectral fit parameter nH value = 4.71902e+21
[Mon Sep 26 09:51:32 2011] Spectral fit parameter PhoIndex value = 2.69481
[Mon Sep 26 09:51:32 2011] Failed to get F(0.3-8.0) from acisf10093/analysis//spectral/fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 09:51:32 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 09:51:32 2011] Using Nh = 4.7e+21, photon index=2.69, rate=0.0219, arf fullrun_ccd0_acisf10093_pi14-548_pass1_cl_src1.arf
[Mon Sep 26 09:51:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 09:51:32 2011] Updating source flux to 2e-13