[Thu Feb 23 04:56:01 2012] Detection parameters:
  Position = (482.6, 233.6) = 17 11 24.73 -39 32 0.7
  Extent = 0.5" x 0.5", rotation angle = 36 degrees
  Source counts = 14.5 +/- 4.1
  Background counts = 2.5
  Rate = 0.0005 +/- 0.0001

[Thu Feb 23 04:56:02 2012] Off-axis axis estimate = 4.51'
[Thu Feb 23 05:18:47 2012] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 05:18:47 2012] Initial guess for spatial extent in simple fitting = 0.99"
[Thu Feb 23 05:18:47 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.983
[Thu Feb 23 05:18:47 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 0.99"
[Thu Feb 23 05:42:14 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass0_src13.ximg exists
[Thu Feb 23 05:42:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10092_pi14-548_cl_pass0_src13.csv
[Thu Feb 23 05:42:14 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass0_src13_1.ximg exists
[Thu Feb 23 05:42:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10092_pi14-548_cl_pass0_src13.csv
[Thu Feb 23 05:42:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10092_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10092_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 05:42:14 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Thu Feb 23 05:42:14 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Feb 23 05:42:14 2012] Fit fullrun_ccd1_acisf10092_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Feb 23 06:01:49 2012] Spatial fit model total counts = 39.997900, observed total counts = 40.000000
[Thu Feb 23 06:01:49 2012] Offset between fit and detection position for source 14 = 1.341080 pixels
[Thu Feb 23 06:01:49 2012] 40.052900 total counts/ 18.108400 bgd. counts: snr = 5.156864
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 1.341080 pixels
  Position = (483.8, 234.3) = 17 11 24.70 -39 32 0.6
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 21.9 +/- 6.3
  Background counts = 18.1
  Rate = 0.0008 +/- 0.0002
[Thu Feb 23 06:01:49 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:01:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:01:49 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:01:49 2012] Source does appear to be extended
[Thu Feb 23 06:01:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 06:20:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 06:20:41 2012] Initial guess for spatial extent in simple fitting = 0.61"
[Thu Feb 23 06:20:41 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.739
[Thu Feb 23 06:20:41 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 0.61"
[Thu Feb 23 06:42:44 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass1_src13.ximg exists
[Thu Feb 23 06:42:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10092_pi14-548_cl_pass1_src13.csv
[Thu Feb 23 06:42:44 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass1_src13_1.ximg exists
[Thu Feb 23 06:42:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10092_pi14-548_cl_pass1_src13.csv
[Thu Feb 23 06:42:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10092_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10092_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 06:42:45 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Thu Feb 23 06:42:45 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Feb 23 06:42:45 2012] Fit fullrun_ccd1_acisf10092_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Feb 23 06:57:45 2012] Spatial fit model total counts = 40.998500, observed total counts = 41.000000
[Thu Feb 23 06:57:45 2012] Offset between fit and detection position for source 14 = 0.043537 pixels
[Thu Feb 23 06:57:45 2012] 41.434800 total counts/ 19.795600 bgd. counts: snr = 4.863589
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.043537 pixels
  Position = (483.7, 234.3) = 17 11 24.70 -39 32 0.6
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 21.6 +/- 6.4
  Background counts = 19.8
  Rate = 0.0007 +/- 0.0002
[Thu Feb 23 06:57:45 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:57:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:57:45 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:57:45 2012] Source does appear to be extended
[Thu Feb 23 06:57:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 07:03:23 2012] Writing source region out to fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src14_src.reg
[Thu Feb 23 07:03:23 2012] Extracting stamp from image fullrun_ccd1_acisf10092_pi14-548_cl_sm2.00.img.gz, (456, 207) - (511, 262)
[Thu Feb 23 07:03:24 2012] Writing fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src14.gif
[Thu Feb 23 07:09:44 2012] Size of ../../acisf10092/products/events/fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src14_src.evt.gz[events] = 27 counts
[Thu Feb 23 07:09:44 2012] Mean chipx,y = (429.67, 827.22)
[Thu Feb 23 07:09:44 2012] Mean tdetx,y = (4304.78, 4536.67)
[Thu Feb 23 07:09:44 2012] chipx,y range = (411.00-444.00, 814.00-848.00)
[Thu Feb 23 07:09:44 2012] Size of ../../acisf10092/products/events/fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 54 counts
[Thu Feb 23 07:09:45 2012] Not generating rmf since there are only 21 counts
[Thu Feb 23 07:09:45 2012] arf not found, will run specextract
[Thu Feb 23 07:10:11 2012] ../../acisf10092/products/spectra/fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src14.warf not found
[Thu Feb 23 07:10:11 2012] ../../acisf10092/products/spectra/fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src14.wrmf not found
[Thu Feb 23 07:10:11 2012] Removal of ../../acisf10092/products/spectra/fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src14.soff failed
[Thu Feb 23 07:13:04 2012] Spectrum 14 has only 22 counts, deleting rmf
[Thu Feb 23 07:13:04 2012] 176.657
[Thu Feb 23 07:24:43 2012] Updating aperture counts using extracted products
[Thu Feb 23 07:24:43 2012] Error reading totcts from fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src14_src.pi.gz
[Thu Feb 23 07:24:43 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 07:24:43 2012] Using photon index=1.80, rate=0.000741, arf fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src14.arf
[Thu Feb 23 07:24:43 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 23 07:24:43 2012] Updating source flux to 1.4e-14
[Thu Feb 23 07:24:47 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Feb 23 07:24:48 2012] acisf10092/analysis//spectral/fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete