[Thu Feb 23 04:56:01 2012] Detection parameters:
  Position = (123.1, 285.2) = 17 11 40.02 -39 31 35.4
  Extent = 0.7" x 0.5", rotation angle = 67 degrees
  Source counts = 26.3 +/- 5.8
  Background counts = 7.7
  Rate = 0.0009 +/- 0.0002

[Thu Feb 23 04:56:02 2012] Off-axis axis estimate = 2.55'
[Thu Feb 23 05:18:47 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 05:18:47 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Thu Feb 23 05:18:47 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.980
[Thu Feb 23 05:18:47 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.50"
[Thu Feb 23 05:42:14 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass0_src6.ximg exists
[Thu Feb 23 05:42:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10092_pi14-548_cl_pass0_src6.csv
[Thu Feb 23 05:42:14 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass0_src6_1.ximg exists
[Thu Feb 23 05:42:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10092_pi14-548_cl_pass0_src6.csv
[Thu Feb 23 05:42:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10092_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10092_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 05:42:14 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Thu Feb 23 05:42:14 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Feb 23 05:42:14 2012] Fit fullrun_ccd1_acisf10092_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Feb 23 06:01:49 2012] Spatial fit model total counts = 56.999800, observed total counts = 57.000000
[Thu Feb 23 06:01:49 2012] Offset between fit and detection position for source 12 = 0.533382 pixels
[Thu Feb 23 06:01:49 2012] 56.416800 total counts/ 36.755800 bgd. counts: snr = 3.242968
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.533382 pixels
  Position = (123.0, 285.7) = 17 11 40.05 -39 31 35.4
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 19.7 +/- 7.5
  Background counts = 36.8
  Rate = 0.0007 +/- 0.0003
[Thu Feb 23 06:01:49 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:01:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:01:49 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:01:49 2012] Source does appear to be extended
[Thu Feb 23 06:01:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 06:20:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 06:20:41 2012] Initial guess for spatial extent in simple fitting = 0.33"
[Thu Feb 23 06:20:41 2012] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.742
[Thu Feb 23 06:20:41 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 0.33"
[Thu Feb 23 06:42:44 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass1_src6.ximg exists
[Thu Feb 23 06:42:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10092_pi14-548_cl_pass1_src6.csv
[Thu Feb 23 06:42:44 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass1_src6_1.ximg exists
[Thu Feb 23 06:42:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10092_pi14-548_cl_pass1_src6.csv
[Thu Feb 23 06:42:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10092_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10092_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 06:42:44 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Thu Feb 23 06:42:44 2012] fullrun_ccd1_acisf10092_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Feb 23 06:42:44 2012] Fit fullrun_ccd1_acisf10092_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Feb 23 06:57:45 2012] Spatial fit model total counts = 56.393500, observed total counts = 57.000000
[Thu Feb 23 06:57:45 2012] Offset between fit and detection position for source 12 = 0.009049 pixels
[Thu Feb 23 06:57:45 2012] 55.808600 total counts/ 36.605900 bgd. counts: snr = 3.173853
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.009049 pixels
  Position = (123.0, 285.7) = 17 11 40.05 -39 31 35.4
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 19.2 +/- 7.5
  Background counts = 36.6
  Rate = 0.0007 +/- 0.0003
[Thu Feb 23 06:57:45 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:57:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:57:45 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:57:45 2012] Source does appear to be extended
[Thu Feb 23 06:57:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 07:03:23 2012] Writing source region out to fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src12_src.reg
[Thu Feb 23 07:03:23 2012] Extracting stamp from image fullrun_ccd1_acisf10092_pi14-548_cl_sm2.00.img.gz, (108, 270) - (138, 301)
[Thu Feb 23 07:03:23 2012] Writing fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src12.gif
[Thu Feb 23 07:05:58 2012] Size of ../../acisf10092/products/events/fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src12_src.evt.gz[events] = 25 counts
[Thu Feb 23 07:05:58 2012] Mean chipx,y = (70.40, 755.12)
[Thu Feb 23 07:05:58 2012] Mean tdetx,y = (4376.88, 4177.40)
[Thu Feb 23 07:05:58 2012] chipx,y range = (50.00-82.00, 739.00-773.00)
[Thu Feb 23 07:05:58 2012] Size of ../../acisf10092/products/events/fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 38 counts
[Thu Feb 23 07:06:00 2012] Not generating rmf since there are only 19 counts
[Thu Feb 23 07:06:00 2012] arf not found, will run specextract
[Thu Feb 23 07:06:23 2012] ../../acisf10092/products/spectra/fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src12.warf not found
[Thu Feb 23 07:06:23 2012] ../../acisf10092/products/spectra/fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src12.wrmf not found
[Thu Feb 23 07:06:23 2012] Removal of ../../acisf10092/products/spectra/fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src12.soff failed
[Thu Feb 23 07:13:04 2012] Spectrum 12 has only 19 counts, deleting rmf
[Thu Feb 23 07:13:04 2012] 183.931
[Thu Feb 23 07:24:43 2012] Updating aperture counts using extracted products
[Thu Feb 23 07:24:43 2012] Error reading totcts from fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src12_src.pi.gz
[Thu Feb 23 07:24:43 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 07:24:43 2012] Using photon index=1.80, rate=0.000657, arf fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src12.arf
[Thu Feb 23 07:24:43 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 23 07:24:43 2012] Updating source flux to 1.2e-14
[Thu Feb 23 07:24:47 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Feb 23 07:24:48 2012] acisf10092/analysis//spectral/fullrun_ccd1_acisf10092_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete