[Fri Feb 17 21:04:49 2012] Detection parameters:
  Position = (1127.7, 490.2) = 17 11 1.31 -39 36 1.3
  Extent = 3.6" x 2.4", rotation angle = 78 degrees
  Source counts = 219.9 +/- 16.4
  Background counts = 48.1
  Rate = 0.007 +/- 0.0006

[Fri Feb 17 21:04:49 2012] Off-axis axis estimate = 9.20'
[Fri Feb 17 21:40:12 2012] Using EEF radius (= 3.75 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 21:40:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 21:40:12 2012] Initial guess for spatial extent in simple fitting = 3.75"
[Fri Feb 17 21:40:12 2012] source mask rpix=7.6, npix_max = 263, mask sum = 256, frac = 0.972
[Fri Feb 17 21:40:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.75"
[Fri Feb 17 21:58:12 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 17 21:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 21:58:12 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 17 21:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 21:58:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 21:58:12 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 21:58:12 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 21:58:12 2012] Fit fullrun_ccd3_acisf10091_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 22:25:24 2012] Spatial fit model total counts = 308.000000, observed total counts = 308.000000
[Fri Feb 17 22:25:24 2012] Offset between fit and detection position for source 24 = 0.874915 pixels
[Fri Feb 17 22:25:24 2012] 308.138600 total counts/ 85.071600 bgd. counts: snr = 24.184829
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.874915 pixels
  Position = (1128.3, 490.8) = 17 11 1.31 -39 36 1.2
  Extent = 3.2 (2.8-3.6)", rotation angle = 0
  Source counts = 223.1 +/- 17.6
  Background counts = 85.1
  Rate = 0.008 +/- 0.0006
[Fri Feb 17 22:25:24 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:25:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:25:24 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 22:25:24 2012] Source does appear to be extended
[Fri Feb 17 22:25:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:55:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 22:55:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 22:55:23 2012] Initial guess for spatial extent in simple fitting = 3.17"
[Fri Feb 17 22:55:23 2012] source mask rpix=6.4, npix_max = 192, mask sum = 196, frac = 1.019
[Fri Feb 17 22:55:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.17"
[Fri Feb 17 23:10:58 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 17 23:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 23:10:58 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 17 23:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 23:10:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 23:10:58 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 23:10:58 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 23:10:58 2012] Fit fullrun_ccd3_acisf10091_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Feb 18 00:09:12 2012] Spatial fit model total counts = 288.997000, observed total counts = 289.000000
[Sat Feb 18 00:09:12 2012] Offset between fit and detection position for source 24 = 0.037008 pixels
[Sat Feb 18 00:09:12 2012] 289.064400 total counts/ 72.646400 bgd. counts: snr = 25.391381
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.037008 pixels
  Position = (1128.4, 490.8) = 17 11 1.30 -39 36 1.2
  Extent = 3.1 (2.6-3.5)", rotation angle = 0
  Source counts = 216.4 +/- 17.0
  Background counts = 72.6
  Rate = 0.007 +/- 0.0006
[Sat Feb 18 00:09:12 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 00:09:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 00:09:12 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 00:09:12 2012] Source does appear to be extended
[Sat Feb 18 00:09:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 00:23:19 2012] Writing source region out to fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src24_src.reg
[Sat Feb 18 00:23:19 2012] Extracting stamp from image fullrun_ccd3_acisf10091_pi14-548_cl_sm2.00.img.gz, (988, 350) - (1269, 632)
[Sat Feb 18 00:23:19 2012] Writing fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src24.gif
[Sat Feb 18 00:23:21 2012] Size of ../../acisf10091/products/events/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src24_src.evt.gz[events] = 273 counts
[Sat Feb 18 00:23:21 2012] Mean chipx,y = (326.09, 86.74)
[Sat Feb 18 00:23:21 2012] Mean tdetx,y = (5045.26, 3387.09)
[Sat Feb 18 00:23:21 2012] chipx,y range = (296.00-365.00, 49.00-122.00)
[Sat Feb 18 00:23:21 2012] Size of ../../acisf10091/products/events/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src24_bgd.evt.gz[events] = 427 counts
[Sat Feb 18 00:23:22 2012] rmf not found, will run specextract
[Sat Feb 18 00:23:22 2012] arf not found, will run specextract
[Sat Feb 18 00:23:33 2012] ../../acisf10091/products/spectra/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src24.warf not found
[Sat Feb 18 00:23:33 2012] ../../acisf10091/products/spectra/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src24.wrmf not found
[Sat Feb 18 00:23:33 2012] Removal of ../../acisf10091/products/spectra/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src24.soff failed
[Sat Feb 18 00:33:38 2012] Keeping rmf generated by specextract
[Sat Feb 18 00:33:38 2012] 162.918
[Sat Feb 18 00:34:20 2012] Updating aperture counts using extracted products
[Sat Feb 18 00:34:20 2012] Error reading totcts from fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src24_src.pi.gz
[Sat Feb 18 00:34:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 00:34:20 2012] Using photon index=1.80, rate=0.0073, arf fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src24.arf
[Sat Feb 18 00:34:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 18 00:34:20 2012] Updating source flux to 1.4e-13
[Sat Feb 18 00:34:38 2012] Reading fit data from acisf10091/analysis//spectral/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src24_pl.csv
[Sat Feb 18 00:34:38 2012] Spectral fit parameter nH value = 8.53331e+21
[Sat Feb 18 00:34:38 2012] Spectral fit parameter PhoIndex value = 1.29879
[Sat Feb 18 00:34:38 2012] Failed to get F(0.3-8.0) from acisf10091/analysis//spectral/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src24_pl.csv, possibly due to different flux energy range selected
[Sat Feb 18 00:34:38 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 00:34:38 2012] Using Nh = 8.5e+21, photon index=1.30, rate=0.0073, arf fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src24.arf
[Sat Feb 18 00:34:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 18 00:34:38 2012] Updating source flux to 1.5e-13