[Fri Feb 17 21:04:49 2012] Detection parameters:
  Position = (1110.1, 734.5) = 17 11 2.08 -39 34 1.1
  Extent = 3.1" x 2.0", rotation angle = 167 degrees
  Source counts = 22.2 +/- 5.9
  Background counts = 12.8
  Rate = 0.0007 +/- 0.0002

[Fri Feb 17 21:04:49 2012] Off-axis axis estimate = 8.59'
[Fri Feb 17 21:40:12 2012] Using EEF radius (= 3.26 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 21:40:12 2012] Initial guess for spatial extent in simple fitting = 3.26"
[Fri Feb 17 21:40:12 2012] source mask rpix=6.6, npix_max = 203, mask sum = 210, frac = 1.033
[Fri Feb 17 21:40:12 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 3.26"
[Fri Feb 17 21:58:12 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src7.ximg exists
[Fri Feb 17 21:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src7.csv
[Fri Feb 17 21:58:12 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Feb 17 21:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src7.csv
[Fri Feb 17 21:58:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 21:58:12 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Feb 17 21:58:12 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Feb 17 21:58:12 2012] Fit fullrun_ccd3_acisf10091_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Feb 17 22:25:24 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 27.054014 pixels away
[Fri Feb 17 22:25:24 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:25:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:25:24 2012] Assessing source extent using major
[Fri Feb 17 22:25:24 2012] Source does appear to be extended
[Fri Feb 17 22:25:24 2012] Computing asymmetry using major and minor axis, asym = 1.50
[Fri Feb 17 22:25:24 2012] Source is asymmetric
[Fri Feb 17 22:55:23 2012] Using EEF radius (= 3.26 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 22:55:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 22:55:23 2012] Initial guess for spatial extent in simple fitting = 3.26"
[Fri Feb 17 22:55:23 2012] source mask rpix=6.6, npix_max = 203, mask sum = 210, frac = 1.033
[Fri Feb 17 22:55:23 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 3.26"
[Fri Feb 17 23:10:58 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src7.ximg exists
[Fri Feb 17 23:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src7.csv
[Fri Feb 17 23:10:58 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Feb 17 23:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src7.csv
[Fri Feb 17 23:10:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 23:10:58 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Feb 17 23:10:58 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Feb 17 23:10:58 2012] Fit fullrun_ccd3_acisf10091_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Feb 18 00:09:12 2012] Spatial fit model total counts = 53.788900, observed total counts = 54.000000
[Sat Feb 18 00:09:12 2012] Offset between fit and detection position for source 19 = 3.295468 pixels
[Sat Feb 18 00:09:12 2012] 53.799200 total counts/ 35.150700 bgd. counts: snr = 3.145407
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 3.295468 pixels
  Position = (1113.3, 734.1) = 17 11 1.97 -39 34 1.5
  Extent = 2.3 (1.5-4.4)", rotation angle = 0
  Source counts = 18.6 +/- 7.3
  Background counts = 35.2
  Rate = 0.0006 +/- 0.0002
[Sat Feb 18 00:09:12 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 00:09:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 00:09:12 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 00:09:12 2012] Source does appear to be extended
[Sat Feb 18 00:09:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 00:23:19 2012] Writing source region out to fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src19_src.reg
[Sat Feb 18 00:23:19 2012] Extracting stamp from image fullrun_ccd3_acisf10091_pi14-548_cl_sm2.00.img.gz, (1009, 630) - (1217, 838)
[Sat Feb 18 00:23:19 2012] Writing fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src19.gif
[Sat Feb 18 00:26:45 2012] Size of ../../acisf10091/products/events/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src19_src.evt.gz[events] = 43 counts
[Sat Feb 18 00:26:45 2012] Mean chipx,y = (195.79, 289.91)
[Sat Feb 18 00:26:45 2012] Mean tdetx,y = (4842.09, 3256.79)
[Sat Feb 18 00:26:45 2012] chipx,y range = (167.00-221.00, 264.00-311.00)
[Sat Feb 18 00:26:45 2012] Size of ../../acisf10091/products/events/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 216 counts
[Sat Feb 18 00:26:46 2012] Not generating rmf since there are only 18 counts
[Sat Feb 18 00:26:46 2012] arf not found, will run specextract
[Sat Feb 18 00:27:06 2012] ../../acisf10091/products/spectra/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src19.warf not found
[Sat Feb 18 00:27:06 2012] ../../acisf10091/products/spectra/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src19.wrmf not found
[Sat Feb 18 00:27:06 2012] Removal of ../../acisf10091/products/spectra/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src19.soff failed
[Sat Feb 18 00:33:38 2012] Spectrum 19 has only 19 counts, deleting rmf
[Sat Feb 18 00:33:38 2012] 159.879
[Sat Feb 18 00:34:20 2012] Updating aperture counts using extracted products
[Sat Feb 18 00:34:20 2012] Error reading totcts from fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src19_src.pi.gz
[Sat Feb 18 00:34:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 00:34:20 2012] Using photon index=1.80, rate=0.000629, arf fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src19.arf
[Sat Feb 18 00:34:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 18 00:34:20 2012] Updating source flux to 1.2e-14
[Sat Feb 18 00:34:31 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting