[Fri Feb 17 21:04:48 2012] Detection parameters:
  Position = (578.6, 1052.3) = 17 11 24.71 -39 31 25.2
  Extent = 1.1" x 0.6", rotation angle = 112 degrees
  Source counts = 74.6 +/- 9.3
  Background counts = 11.4
  Rate = 0.003 +/- 0.0003

[Fri Feb 17 21:04:49 2012] Off-axis axis estimate = 4.43'
[Fri Feb 17 21:40:12 2012] Using EEF radius (= 0.97 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 21:40:12 2012] Initial guess for spatial extent in simple fitting = 0.97"
[Fri Feb 17 21:40:12 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.029
[Fri Feb 17 21:40:12 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.97"
[Fri Feb 17 21:58:12 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src3.ximg exists
[Fri Feb 17 21:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src3.csv
[Fri Feb 17 21:58:12 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Feb 17 21:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src3.csv
[Fri Feb 17 21:58:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10091_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 21:58:12 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Feb 17 21:58:12 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Feb 17 21:58:12 2012] Fit fullrun_ccd3_acisf10091_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Feb 17 22:25:24 2012] Spatial fit model total counts = 93.674900, observed total counts = 94.000000
[Fri Feb 17 22:25:24 2012] Offset between fit and detection position for source 10 = 0.874998 pixels
[Fri Feb 17 22:25:24 2012] 92.379300 total counts/ 24.523000 bgd. counts: snr = 13.702612
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.874998 pixels
  Position = (579.0, 1053.0) = 17 11 24.71 -39 31 25.0
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 67.9 +/- 9.6
  Background counts = 24.5
  Rate = 0.002 +/- 0.0003
[Fri Feb 17 22:25:24 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:25:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:25:24 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 22:25:24 2012] Source does appear to be extended
[Fri Feb 17 22:25:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:55:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 22:55:23 2012] Initial guess for spatial extent in simple fitting = 0.87"
[Fri Feb 17 22:55:23 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.782
[Fri Feb 17 22:55:23 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.87"
[Fri Feb 17 23:10:58 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src3.ximg exists
[Fri Feb 17 23:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src3.csv
[Fri Feb 17 23:10:58 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Feb 17 23:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src3.csv
[Fri Feb 17 23:10:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10091_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 23:10:58 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Feb 17 23:10:58 2012] fullrun_ccd3_acisf10091_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Feb 17 23:10:58 2012] Fit fullrun_ccd3_acisf10091_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Feb 18 00:09:12 2012] Spatial fit model total counts = 90.204500, observed total counts = 91.000000
[Sat Feb 18 00:09:12 2012] Offset between fit and detection position for source 10 = 0.085785 pixels
[Sat Feb 18 00:09:12 2012] 88.691800 total counts/ 18.887200 bgd. counts: snr = 16.062023
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.085785 pixels
  Position = (579.1, 1052.9) = 17 11 24.71 -39 31 25.1
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 69.8 +/- 9.4
  Background counts = 18.9
  Rate = 0.002 +/- 0.0003
[Sat Feb 18 00:09:12 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 00:09:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 00:09:12 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 00:09:12 2012] Source does appear to be extended
[Sat Feb 18 00:09:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 00:23:19 2012] Writing source region out to fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src10_src.reg
[Sat Feb 18 00:23:19 2012] Extracting stamp from image fullrun_ccd3_acisf10091_pi14-548_cl_sm2.00.img.gz, (538, 1012) - (620, 1094)
[Sat Feb 18 00:23:19 2012] Writing fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src10.gif
[Sat Feb 18 00:24:15 2012] Size of ../../acisf10091/products/events/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src10_src.evt.gz[events] = 86 counts
[Sat Feb 18 00:24:15 2012] Mean chipx,y = (436.52, 867.12)
[Sat Feb 18 00:24:15 2012] Mean tdetx,y = (4264.88, 3497.52)
[Sat Feb 18 00:24:15 2012] chipx,y range = (420.00-455.00, 847.00-888.00)
[Sat Feb 18 00:24:15 2012] Size of ../../acisf10091/products/events/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 188 counts
[Sat Feb 18 00:24:16 2012] Not generating rmf since there are only 69 counts
[Sat Feb 18 00:24:16 2012] arf not found, will run specextract
[Sat Feb 18 00:24:49 2012] ../../acisf10091/products/spectra/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src10.warf not found
[Sat Feb 18 00:24:49 2012] ../../acisf10091/products/spectra/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src10.wrmf not found
[Sat Feb 18 00:24:49 2012] Removal of ../../acisf10091/products/spectra/fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src10.soff failed
[Sat Feb 18 00:33:38 2012] Spectrum 10 has only 70 counts, deleting rmf
[Sat Feb 18 00:33:38 2012] 184.027
[Sat Feb 18 00:34:20 2012] Updating aperture counts using extracted products
[Sat Feb 18 00:34:20 2012] Error reading totcts from fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src10_src.pi.gz
[Sat Feb 18 00:34:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 00:34:20 2012] Using photon index=1.80, rate=0.00235, arf fullrun_ccd3_acisf10091_pi14-548_pass1_cl_src10.arf
[Sat Feb 18 00:34:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 18 00:34:20 2012] Updating source flux to 4.1e-14
[Sat Feb 18 00:34:31 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting