[Fri Feb 17 21:04:46 2012] Detection parameters:
  Position = (1106.2, 645.9) = 17 11 27.85 -39 27 56.3
  Extent = 2.1" x 1.0", rotation angle = 113 degrees
  Source counts = 20.7 +/- 5.9
  Background counts = 14.3
  Rate = 0.0007 +/- 0.0002

[Fri Feb 17 21:04:46 2012] Off-axis axis estimate = 6.13'
[Fri Feb 17 21:28:26 2012] Using EEF radius (= 1.69 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 21:28:26 2012] Initial guess for spatial extent in simple fitting = 1.69"
[Fri Feb 17 21:28:26 2012] source mask rpix=3.4, npix_max = 62, mask sum = 64, frac = 1.030
[Fri Feb 17 21:28:26 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 1.69"
[Fri Feb 17 21:40:12 2012] fullrun_ccd2_acisf10091_pi14-548_cl_pass0_src9.ximg exists
[Fri Feb 17 21:40:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10091_pi14-548_cl_pass0_src9.csv
[Fri Feb 17 21:40:12 2012] fullrun_ccd2_acisf10091_pi14-548_cl_pass0_src9_1.ximg exists
[Fri Feb 17 21:40:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10091_pi14-548_cl_pass0_src9.csv
[Fri Feb 17 21:40:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10091_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10091_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 21:40:12 2012] fullrun_ccd2_acisf10091_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri Feb 17 21:40:12 2012] fullrun_ccd2_acisf10091_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Feb 17 21:40:12 2012] Fit fullrun_ccd2_acisf10091_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Feb 17 22:25:22 2012] Spatial fit model total counts = 42.983200, observed total counts = 43.000000
[Fri Feb 17 22:25:22 2012] Offset between fit and detection position for source 10 = 1.007590 pixels
[Fri Feb 17 22:25:22 2012] 42.370700 total counts/ 21.185700 bgd. counts: snr = 4.602641
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.007590 pixels
  Position = (1107.1, 646.3) = 17 11 27.83 -39 27 56.3
  Extent = 1.6 (0.5-3.4)", rotation angle = 0
  Source counts = 21.2 +/- 6.5
  Background counts = 21.2
  Rate = 0.0007 +/- 0.0002
[Fri Feb 17 22:25:22 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 22:25:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 22:25:22 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 22:25:22 2012] Source does appear to be extended
[Fri Feb 17 22:25:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 22:42:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 22:42:42 2012] Initial guess for spatial extent in simple fitting = 1.57"
[Fri Feb 17 22:42:42 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.024
[Fri Feb 17 22:42:42 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 1.57"
[Fri Feb 17 22:55:22 2012] fullrun_ccd2_acisf10091_pi14-548_cl_pass1_src9.ximg exists
[Fri Feb 17 22:55:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10091_pi14-548_cl_pass1_src9.csv
[Fri Feb 17 22:55:22 2012] fullrun_ccd2_acisf10091_pi14-548_cl_pass1_src9_1.ximg exists
[Fri Feb 17 22:55:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10091_pi14-548_cl_pass1_src9.csv
[Fri Feb 17 22:55:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10091_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10091_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 22:55:22 2012] fullrun_ccd2_acisf10091_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Fri Feb 17 22:55:22 2012] fullrun_ccd2_acisf10091_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Feb 17 22:55:22 2012] Fit fullrun_ccd2_acisf10091_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Feb 18 00:09:10 2012] Spatial fit model total counts = 37.223300, observed total counts = 38.000000
[Sat Feb 18 00:09:10 2012] Offset between fit and detection position for source 10 = 1.314941 pixels
[Sat Feb 18 00:09:10 2012] 36.313440 total counts/ 5.997240 bgd. counts: snr = 12.379384
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.314941 pixels
  Position = (1107.9, 645.3) = 17 11 27.79 -39 27 56.8
  Extent = 1.9 (0.7-3.1)", rotation angle = 0
  Source counts = 30.3 +/- 6.0
  Background counts = 6.0
  Rate = 0.001 +/- 0.0002
[Sat Feb 18 00:09:10 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 00:09:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 00:09:10 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 00:09:10 2012] Source does appear to be extended
[Sat Feb 18 00:09:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 00:16:16 2012] Writing source region out to fullrun_ccd2_acisf10091_pi14-548_pass1_cl_src10_src.reg
[Sat Feb 18 00:16:16 2012] Extracting stamp from image fullrun_ccd2_acisf10091_pi14-548_cl_sm2.00.img.gz, (1019, 557) - (1196, 734)
[Sat Feb 18 00:16:16 2012] Writing fullrun_ccd2_acisf10091_pi14-548_pass1_cl_src10.gif
[Sat Feb 18 00:20:46 2012] Size of ../../acisf10091/products/events/fullrun_ccd2_acisf10091_pi14-548_pass1_cl_src10_src.evt.gz[events] = 50 counts
[Sat Feb 18 00:20:46 2012] Mean chipx,y = (781.22, 813.84)
[Sat Feb 18 00:20:46 2012] Mean tdetx,y = (3874.84, 3304.78)
[Sat Feb 18 00:20:46 2012] chipx,y range = (755.00-801.00, 789.00-838.00)
[Sat Feb 18 00:20:46 2012] Size of ../../acisf10091/products/events/fullrun_ccd2_acisf10091_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 502 counts
[Sat Feb 18 00:20:47 2012] Not generating rmf since there are only 30 counts
[Sat Feb 18 00:20:47 2012] arf not found, will run specextract
[Sat Feb 18 00:21:14 2012] ../../acisf10091/products/spectra/fullrun_ccd2_acisf10091_pi14-548_pass1_cl_src10.warf not found
[Sat Feb 18 00:21:14 2012] ../../acisf10091/products/spectra/fullrun_ccd2_acisf10091_pi14-548_pass1_cl_src10.wrmf not found
[Sat Feb 18 00:21:14 2012] Removal of ../../acisf10091/products/spectra/fullrun_ccd2_acisf10091_pi14-548_pass1_cl_src10.soff failed
[Sat Feb 18 00:23:18 2012] Spectrum 10 has only 30 counts, deleting rmf
[Sat Feb 18 00:23:18 2012] 163.564
[Sat Feb 18 00:34:19 2012] Updating aperture counts using extracted products
[Sat Feb 18 00:34:19 2012] Error reading totcts from fullrun_ccd2_acisf10091_pi14-548_pass1_cl_src10_src.pi.gz
[Sat Feb 18 00:34:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 00:34:20 2012] Using photon index=1.80, rate=0.00102, arf fullrun_ccd2_acisf10091_pi14-548_pass1_cl_src10.arf
[Sat Feb 18 00:34:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 18 00:34:20 2012] Updating source flux to 2e-14
[Sat Feb 18 00:34:30 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 18 00:34:31 2012] acisf10091/analysis//spectral/fullrun_ccd2_acisf10091_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete