[Sat Oct 15 12:49:04 2011] Detection parameters:
  Position = (319.3, 1018.1) = 17 11 40.96 -39 34 2.7
  Extent = 0.7" x 0.5", rotation angle = 155 degrees
  Source counts = 19.3 +/- 4.9
  Background counts = 4.7
  Rate = 0.0007 +/- 0.0002

[Sat Oct 15 12:49:05 2011] Off-axis axis estimate = 1.28'
[Sat Oct 15 12:50:34 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:50:34 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct 15 12:50:34 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.915
[Sat Oct 15 12:50:34 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.38"
[Sat Oct 15 12:50:37 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src6.ximg exists
[Sat Oct 15 12:50:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src6.csv
[Sat Oct 15 12:50:37 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src6_1.ximg exists
[Sat Oct 15 12:50:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src6.csv
[Sat Oct 15 12:50:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:50:37 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat Oct 15 12:50:37 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Oct 15 12:50:37 2011] Fit fullrun_ccd3_acisf10090_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Oct 15 12:50:48 2011] Spatial fit model total counts = 34.551700, observed total counts = 34.000000
[Sat Oct 15 12:50:48 2011] Offset between fit and detection position for source 7 = 0.743327 pixels
[Sat Oct 15 12:50:48 2011] 34.262200 total counts/ 13.562500 bgd. counts: snr = 5.620749
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.743327 pixels
  Position = (320.0, 1018.3) = 17 11 40.95 -39 34 2.8
  Extent = 0.6 (0.3-0.7)", rotation angle = 0
  Source counts = 20.7 +/- 5.9
  Background counts = 13.6
  Rate = 0.0007 +/- 0.0002
[Sat Oct 15 12:50:48 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:50:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:50:48 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 12:50:48 2011] Source does appear to be extended
[Sat Oct 15 12:50:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:51:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:51:06 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Sat Oct 15 12:51:06 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.133
[Sat Oct 15 12:51:06 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.55"
[Sat Oct 15 12:51:07 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass1_src5.ximg exists
[Sat Oct 15 12:51:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass1_src5.csv
[Sat Oct 15 12:51:07 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Oct 15 12:51:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass1_src5.csv
[Sat Oct 15 12:51:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10090_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10090_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:51:07 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Oct 15 12:51:07 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Oct 15 12:51:07 2011] Fit fullrun_ccd3_acisf10090_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Oct 15 12:51:15 2011] Spatial fit model total counts = 34.669000, observed total counts = 35.000000
[Sat Oct 15 12:51:15 2011] Offset between fit and detection position for source 7 = 0.444089 pixels
[Sat Oct 15 12:51:15 2011] 34.608800 total counts/ 18.613000 bgd. counts: snr = 3.707642
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.444089 pixels
  Position = (319.6, 1018.3) = 17 11 40.97 -39 34 2.8
  Extent = 0.4 (0.2-0.6)", rotation angle = 0
  Source counts = 16.0 +/- 5.9
  Background counts = 18.6
  Rate = 0.0006 +/- 0.0002
[Sat Oct 15 12:51:15 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:51:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:51:15 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 12:51:15 2011] Source does appear to be extended
[Sat Oct 15 12:51:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:53:21 2011] Not overwriting source region fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_src.reg
[Sat Oct 15 12:53:21 2011] Extracting stamp from image fullrun_ccd3_acisf10090_pi14-548_cl_sm2.00.img.gz, (302, 1001) - (337, 1036)
[Sat Oct 15 12:53:21 2011] Writing fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7.gif
[Sat Oct 15 12:53:36 2011] ../../acisf10090/products/events/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_src.evt and ../../acisf10090/products/events/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sat Oct 15 12:53:36 2011] Size of ../../acisf10090/products/events/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_src.evt.gz[events] = 21 counts
[Sat Oct 15 12:53:36 2011] Mean chipx,y = (852.29, 903.29)
[Sat Oct 15 12:53:36 2011] Mean tdetx,y = (4228.71, 3913.29)
[Sat Oct 15 12:53:36 2011] chipx,y range = (831.00-866.00, 883.00-917.00)
[Sat Oct 15 12:53:36 2011] Size of ../../acisf10090/products/events/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 30 counts
[Sat Oct 15 12:53:36 2011] ../../acisf10090/products/images/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_src.img and ../../acisf10090/products/images/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Sat Oct 15 12:53:36 2011] ../../acisf10090/products/spectra/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_src.pi and ../../acisf10090/products/spectra/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sat Oct 15 12:53:36 2011] Not generating rmf since there are only 15 counts
[Sat Oct 15 12:53:39 2011] ../../acisf10090/products/lightcurves/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_src.lc and ../../acisf10090/products/lightcurves/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sat Oct 15 12:53:52 2011] 200.652
[Sat Oct 15 12:53:55 2011] Updating aperture counts using extracted products
[Sat Oct 15 12:53:55 2011] Error reading totcts from fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_src.pi.gz
[Sat Oct 15 12:53:55 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 12:53:55 2011] Using photon index=1.80, rate=0.000563, arf fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7.arf
[Sat Oct 15 12:53:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 12:53:55 2011] Updating source flux to 9.1e-15
[Sat Oct 15 12:54:02 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 12:54:03 2011] acisf10090/analysis//spectral/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete