[Sat Oct 15 12:49:04 2011] Detection parameters:
  Position = (677.5, 895.5) = 17 11 25.72 -39 35 2.9
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 25.1 +/- 5.2
  Background counts = 1.9
  Rate = 0.0009 +/- 0.0002

[Sat Oct 15 12:49:05 2011] Off-axis axis estimate = 4.17'
[Sat Oct 15 12:50:34 2011] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:50:34 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Sat Oct 15 12:50:34 2011] source mask rpix=1.8, npix_max = 20, mask sum = 22, frac = 1.048
[Sat Oct 15 12:50:34 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.88"
[Sat Oct 15 12:50:37 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src5.ximg exists
[Sat Oct 15 12:50:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src5.csv
[Sat Oct 15 12:50:37 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Oct 15 12:50:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src5.csv
[Sat Oct 15 12:50:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:50:37 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Oct 15 12:50:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass0_tfrozen_src5.csv
[Sat Oct 15 12:50:37 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Oct 15 12:50:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass0_tfrozen_src5.csv
[Sat Oct 15 12:50:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10090_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10090_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:50:48 2011] Source 2 is offset by 7.663232 and 6.042642 pixels which is larger than
2 X fitted extent = 1.340545 x 1.340545, not incorporating fit results
[Sat Oct 15 12:50:48 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:50:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:50:48 2011] Assessing source extent using major
[Sat Oct 15 12:50:48 2011] Source does appear to be extended
[Sat Oct 15 12:50:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:51:06 2011] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:51:06 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Sat Oct 15 12:51:06 2011] source mask rpix=1.8, npix_max = 20, mask sum = 22, frac = 1.048
[Sat Oct 15 12:51:06 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.88"
[Sat Oct 15 12:51:07 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass1_src4.ximg exists
[Sat Oct 15 12:51:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass1_src4.csv
[Sat Oct 15 12:51:07 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass1_src4_1.ximg exists
[Sat Oct 15 12:51:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass1_src4.csv
[Sat Oct 15 12:51:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10090_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10090_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:51:07 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sat Oct 15 12:51:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass1_tfrozen_src4.csv
[Sat Oct 15 12:51:07 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Oct 15 12:51:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass1_tfrozen_src4.csv
[Sat Oct 15 12:51:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10090_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10090_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:51:15 2011] Source 2 is offset by 7.663232 and 6.042642 pixels which is larger than
2 X fitted extent = 1.340545 x 1.340545, not incorporating fit results
[Sat Oct 15 12:51:15 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:51:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:51:15 2011] Assessing source extent using major
[Sat Oct 15 12:51:15 2011] Source does appear to be extended
[Sat Oct 15 12:51:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:51:15 2011] Source is confused with source 3
[Sat Oct 15 12:53:21 2011] Not overwriting source region fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 15 12:53:21 2011] Extracting stamp from image fullrun_ccd3_acisf10090_pi14-548_cl_sm2.00.img.gz, (655, 873) - (700, 918)
[Sat Oct 15 12:53:21 2011] Writing fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2.gif
[Sat Oct 15 12:53:33 2011] ../../acisf10090/products/events/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_src.evt and ../../acisf10090/products/events/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 15 12:53:33 2011] Size of ../../acisf10090/products/events/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_src.evt.gz[events] = 57 counts
[Sat Oct 15 12:53:33 2011] Mean chipx,y = (472.33, 834.42)
[Sat Oct 15 12:53:33 2011] Mean tdetx,y = (4297.58, 3533.33)
[Sat Oct 15 12:53:33 2011] chipx,y range = (458.00-490.00, 813.00-850.00)
[Sat Oct 15 12:53:33 2011] Size of ../../acisf10090/products/events/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 36 counts
[Sat Oct 15 12:53:33 2011] ../../acisf10090/products/images/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_src.img and ../../acisf10090/products/images/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 15 12:53:33 2011] ../../acisf10090/products/spectra/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_src.pi and ../../acisf10090/products/spectra/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct 15 12:53:33 2011] Not generating rmf since there are only 25 counts
[Sat Oct 15 12:53:36 2011] ../../acisf10090/products/lightcurves/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_src.lc and ../../acisf10090/products/lightcurves/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 15 12:53:52 2011] 181.75
[Sat Oct 15 12:53:55 2011] Updating aperture counts using extracted products
[Sat Oct 15 12:53:55 2011] Error reading totcts from fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 15 12:53:55 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 12:53:55 2011] Using photon index=1.80, rate=0.000883, arf fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2.arf
[Sat Oct 15 12:53:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 12:53:55 2011] Updating source flux to 1.6e-14
[Sat Oct 15 12:54:02 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Oct 15 12:54:03 2011] acisf10090/analysis//spectral/fullrun_ccd3_acisf10090_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete