[Sat Oct 15 12:49:05 2011] Detection parameters: Position = (130.8, 754.6) = 17 11 48.99 -39 36 12.3 Extent = 0.6" x 0.5", rotation angle = 26 degrees Source counts = 51.3 +/- 7.9 Background counts = 11.7 Rate = 0.002 +/- 0.0003 [Sat Oct 15 12:49:05 2011] Off-axis axis estimate = 3.38' [Sat Oct 15 12:50:34 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting [Sat Oct 15 12:50:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Oct 15 12:50:34 2011] Initial guess for spatial extent in simple fitting = 0.66" [Sat Oct 15 12:50:34 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.880 [Sat Oct 15 12:50:34 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.66" [Sat Oct 15 12:50:36 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src1.ximg exists [Sat Oct 15 12:50:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src1.csv [Sat Oct 15 12:50:36 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src1_1.ximg exists [Sat Oct 15 12:50:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src1.csv [Sat Oct 15 12:50:36 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf10090_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 15 12:50:37 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Sat Oct 15 12:50:37 2011] fullrun_ccd3_acisf10090_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Sat Oct 15 12:50:37 2011] Fit fullrun_ccd3_acisf10090_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Sat Oct 15 12:50:48 2011] Spatial fit model total counts = 76.990800, observed total counts = 77.000000 [Sat Oct 15 12:50:48 2011] Offset between fit and detection position for source 13 = 7.166777 pixels [Sat Oct 15 12:50:48 2011] 80.006642 total counts/ 80.006600 bgd. counts: snr = 0.000005 Spatial fit parameters: Offset between fit and detection position for source 13 = 7.166777 pixels Position = (125.6, 749.6) = 17 11 49.23 -39 36 15.0 Extent = 1.5 (0.2-2.8)", rotation angle = 0 Source counts = 0.0 +/- 8.9 Background counts = 80.0 Rate = 1e-09 +/- 0.0003 Deleting source due to low Poisson probability