[Sat Oct 15 12:49:01 2011] Detection parameters:
  Position = (546.3, 1076.4) = 17 12 8.22 -39 23 52.3
  Extent = 3.8" x 2.5", rotation angle = 70 degrees
  Source counts = 34.1 +/- 8.9
  Background counts = 45.9
  Rate = 0.001 +/- 0.0003

[Sat Oct 15 12:49:01 2011] Off-axis axis estimate = 10.17'
[Sat Oct 15 12:50:26 2011] Using EEF radius (= 4.59 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:50:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 12:50:26 2011] Initial guess for spatial extent in simple fitting = 4.59"
[Sat Oct 15 12:50:26 2011] source mask rpix=9.3, npix_max = 386, mask sum = 380, frac = 0.984
[Sat Oct 15 12:50:26 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 4.59"
[Sat Oct 15 12:50:26 2011] fullrun_ccd0_acisf10090_pi14-548_cl_pass0_src7.ximg exists
[Sat Oct 15 12:50:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10090_pi14-548_cl_pass0_src7.csv
[Sat Oct 15 12:50:26 2011] fullrun_ccd0_acisf10090_pi14-548_cl_pass0_src7_1.ximg exists
[Sat Oct 15 12:50:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10090_pi14-548_cl_pass0_src7.csv
[Sat Oct 15 12:50:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10090_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10090_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:50:26 2011] fullrun_ccd0_acisf10090_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sat Oct 15 12:50:26 2011] fullrun_ccd0_acisf10090_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Oct 15 12:50:26 2011] Fit fullrun_ccd0_acisf10090_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Oct 15 12:50:41 2011] Spatial fit model total counts = 173.044000, observed total counts = 173.000000
[Sat Oct 15 12:50:41 2011] Offset between fit and detection position for source 8 = 2.055654 pixels
[Sat Oct 15 12:50:41 2011] 172.362400 total counts/ 146.409000 bgd. counts: snr = 2.144916
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.055654 pixels
  Position = (546.8, 1078.4) = 17 12 8.22 -39 23 51.6
  Extent = 2.3 (1.2-4.4)", rotation angle = 0
  Source counts = 26.0 +/- 13.1
  Background counts = 146.4
  Rate = 0.0009 +/- 0.0005
[Sat Oct 15 12:50:41 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:50:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:50:41 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 12:50:41 2011] Source does appear to be extended
[Sat Oct 15 12:50:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:51:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:51:02 2011] Initial guess for spatial extent in simple fitting = 2.32"
[Sat Oct 15 12:51:02 2011] source mask rpix=4.7, npix_max = 108, mask sum = 110, frac = 1.010
[Sat Oct 15 12:51:02 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 2.32"
[Sat Oct 15 12:51:02 2011] fullrun_ccd0_acisf10090_pi14-548_cl_pass1_src6.ximg exists
[Sat Oct 15 12:51:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10090_pi14-548_cl_pass1_src6.csv
[Sat Oct 15 12:51:02 2011] fullrun_ccd0_acisf10090_pi14-548_cl_pass1_src6_1.ximg exists
[Sat Oct 15 12:51:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10090_pi14-548_cl_pass1_src6.csv
[Sat Oct 15 12:51:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10090_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10090_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:51:02 2011] fullrun_ccd0_acisf10090_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sat Oct 15 12:51:02 2011] fullrun_ccd0_acisf10090_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Oct 15 12:51:03 2011] Fit fullrun_ccd0_acisf10090_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Oct 15 12:51:11 2011] Warning, spatial fit 6 centroid is now closest to src. 9
[Sat Oct 15 12:51:11 2011] Source 6 in spatial fitting is no longer close to this source
[Sat Oct 15 12:51:11 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:51:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:51:11 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 12:51:11 2011] Source does appear to be extended
[Sat Oct 15 12:51:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:51:33 2011] Not overwriting source region fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_src.reg
[Sat Oct 15 12:51:33 2011] Extracting stamp from image fullrun_ccd0_acisf10090_pi14-548_cl_sm2.00.img.gz, (441, 972) - (653, 1175)
[Sat Oct 15 12:51:33 2011] Writing fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8.gif
[Sat Oct 15 12:51:51 2011] ../../acisf10090/products/events/fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_src.evt and ../../acisf10090/products/events/fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sat Oct 15 12:51:51 2011] Size of ../../acisf10090/products/events/fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_src.evt.gz[events] = 81 counts
[Sat Oct 15 12:51:51 2011] Mean chipx,y = (400.72, 33.88)
[Sat Oct 15 12:51:51 2011] Mean tdetx,y = (3094.88, 4731.28)
[Sat Oct 15 12:51:51 2011] chipx,y range = (366.00-429.00, 8.00-59.00)
[Sat Oct 15 12:51:51 2011] Size of ../../acisf10090/products/events/fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 396 counts
[Sat Oct 15 12:51:51 2011] ../../acisf10090/products/images/fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_src.img and ../../acisf10090/products/images/fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Sat Oct 15 12:51:51 2011] ../../acisf10090/products/spectra/fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_src.pi and ../../acisf10090/products/spectra/fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sat Oct 15 12:51:51 2011] Not generating rmf since there are only 25 counts
[Sat Oct 15 12:51:54 2011] ../../acisf10090/products/lightcurves/fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_src.lc and ../../acisf10090/products/lightcurves/fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sat Oct 15 12:51:58 2011] 158.649
[Sat Oct 15 12:53:54 2011] Updating aperture counts using extracted products
[Sat Oct 15 12:53:54 2011] Error reading totcts from fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_src.pi.gz
[Sat Oct 15 12:53:55 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 12:53:55 2011] Using photon index=1.80, rate=0.000914, arf fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8.arf
[Sat Oct 15 12:53:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 12:53:55 2011] Updating source flux to 1.8e-14
[Sat Oct 15 12:53:58 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 12:53:59 2011] acisf10090/analysis//spectral/fullrun_ccd0_acisf10090_pi14-548_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete