[Fri Sep 30 10:57:11 2011] Detection parameters:
  Position = (930.4, 500.1) = 16 32 0.03 -47 45 31.4
  Extent = 0.6" x 0.5", rotation angle = 136 degrees
  Source counts = 13.6 +/- 3.7
  Background counts = 0.4
  Rate = 0.001 +/- 0.0004

[Fri Sep 30 10:57:11 2011] Off-axis axis estimate = 4.26'
[Fri Sep 30 10:58:00 2011] Using EEF radius (= 0.91 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:58:00 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Fri Sep 30 10:58:00 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.903
[Fri Sep 30 10:58:00 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.91"
[Fri Sep 30 10:58:00 2011] fullrun_ccd3_acisf10088_pi14-548_cl_pass0_src4.ximg exists
[Fri Sep 30 10:58:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10088_pi14-548_cl_pass0_src4.csv
[Fri Sep 30 10:58:01 2011] fullrun_ccd3_acisf10088_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Sep 30 10:58:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10088_pi14-548_cl_pass0_src4.csv
[Fri Sep 30 10:58:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10088_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10088_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:58:01 2011] fullrun_ccd3_acisf10088_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Sep 30 10:58:01 2011] fullrun_ccd3_acisf10088_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Sep 30 10:58:01 2011] Fit fullrun_ccd3_acisf10088_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Sep 30 10:58:05 2011] Spatial fit model total counts = 17.002400, observed total counts = 18.000000
[Fri Sep 30 10:58:05 2011] Offset between fit and detection position for source 4 = 0.686656 pixels
[Fri Sep 30 10:58:05 2011] 17.312970 total counts/ 4.973470 bgd. counts: snr = 5.533091
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.686656 pixels
  Position = (930.7, 500.8) = 16 32 0.04 -47 45 31.3
  Extent = 0.6 (0.3-0.9)", rotation angle = 0
  Source counts = 12.3 +/- 4.2
  Background counts = 5.0
  Rate = 0.001 +/- 0.0004
[Fri Sep 30 10:58:05 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 10:58:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 10:58:05 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 10:58:05 2011] Source does appear to be extended
[Fri Sep 30 10:58:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 10:58:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:58:32 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Sep 30 10:58:32 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.837
[Fri Sep 30 10:58:32 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.56"
[Fri Sep 30 10:58:33 2011] fullrun_ccd3_acisf10088_pi14-548_cl_pass1_src4.ximg exists
[Fri Sep 30 10:58:33 2011] fullrun_ccd3_acisf10088_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Sep 30 10:58:33 2011] Fit fullrun_ccd3_acisf10088_pi14-548_cl_pass1_src4 appears to have run properly
[Fri Sep 30 10:58:33 2011] fullrun_ccd3_acisf10088_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Sep 30 10:58:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10088_pi14-548_cl_pass1_tfrozen_src4.csv
[Fri Sep 30 10:58:33 2011] fullrun_ccd3_acisf10088_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Sep 30 10:58:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10088_pi14-548_cl_pass1_tfrozen_src4.csv
[Fri Sep 30 10:58:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10088_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10088_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:58:43 2011] Spatial fit model total counts = 15.674200, observed total counts = 18.000000
[Fri Sep 30 10:58:43 2011] Offset between fit and detection position for source 4 = 0.105050 pixels
[Fri Sep 30 10:58:43 2011] 15.663560 total counts/ 3.543160 bgd. counts: snr = 6.439047
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.105050 pixels
  Position = (930.6, 500.8) = 16 32 0.05 -47 45 31.3
  Extent = 0.5 (0.4-1.1)", rotation angle = 0
  Source counts = 12.1 +/- 4.0
  Background counts = 3.5
  Rate = 0.001 +/- 0.0004
[Fri Sep 30 10:58:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 10:58:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 10:58:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 10:58:43 2011] Source does appear to be extended
[Fri Sep 30 10:58:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 10:59:51 2011] Not overwriting source region fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4_src.reg
[Fri Sep 30 10:59:51 2011] Extracting stamp from image fullrun_ccd3_acisf10088_pi14-548_cl_sm2.00.img.gz, (906, 476) - (955, 525)
[Fri Sep 30 10:59:51 2011] Writing fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4.gif
[Fri Sep 30 11:00:11 2011] ../../acisf10088/products/events/fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4_src.evt and ../../acisf10088/products/events/fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Sep 30 11:00:11 2011] Size of ../../acisf10088/products/events/fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4_src.evt.gz[events] = 15 counts
[Fri Sep 30 11:00:11 2011] Mean chipx,y = (812.47, 528.53)
[Fri Sep 30 11:00:11 2011] Mean tdetx,y = (4603.47, 3873.47)
[Fri Sep 30 11:00:11 2011] chipx,y range = (798.00-831.00, 512.00-542.00)
[Fri Sep 30 11:00:11 2011] Size of ../../acisf10088/products/events/fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 9 counts
[Fri Sep 30 11:00:11 2011] ../../acisf10088/products/images/fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4_src.img and ../../acisf10088/products/images/fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Sep 30 11:00:11 2011] ../../acisf10088/products/spectra/fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4_src.pi and ../../acisf10088/products/spectra/fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Sep 30 11:00:11 2011] Not generating rmf since there are only 12 counts
[Fri Sep 30 11:00:13 2011] ../../acisf10088/products/lightcurves/fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4_src.lc and ../../acisf10088/products/lightcurves/fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Sep 30 11:00:39 2011] 192.167
[Fri Sep 30 11:00:46 2011] Updating aperture counts using extracted products
[Fri Sep 30 11:00:46 2011] Error reading totcts from fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Sep 30 11:00:46 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 11:00:46 2011] Using photon index=1.80, rate=0.00126, arf fullrun_ccd3_acisf10088_pi14-548_pass1_cl_src4.arf
[Fri Sep 30 11:00:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 11:00:46 2011] Updating source flux to 2.2e-14
[Fri Sep 30 11:01:06 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting