[Fri Sep 23 10:53:45 2011] Detection parameters:
  Position = (507.4, 526.7) = 17 1 10.33 -46 9 54.0
  Extent = 0.5" x 0.5", rotation angle = 62 degrees
  Source counts = 27.9 +/- 5.5
  Background counts = 2.1
  Rate = 0.0006 +/- 0.0001

[Fri Sep 23 10:53:47 2011] Off-axis axis estimate = 2.51'
[Fri Sep 23 10:54:56 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:54:56 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Fri Sep 23 10:54:56 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.997
[Fri Sep 23 10:54:56 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.49"
[Fri Sep 23 10:54:58 2011] fullrun_ccd7_acisf10067_pi14-548_cl_pass0_src11.ximg exists
[Fri Sep 23 10:54:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10067_pi14-548_cl_pass0_src11.csv
[Fri Sep 23 10:54:58 2011] fullrun_ccd7_acisf10067_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Sep 23 10:54:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10067_pi14-548_cl_pass0_src11.csv
[Fri Sep 23 10:54:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10067_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10067_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:54:58 2011] fullrun_ccd7_acisf10067_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Sep 23 10:54:58 2011] fullrun_ccd7_acisf10067_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Sep 23 10:54:58 2011] Fit fullrun_ccd7_acisf10067_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Sep 23 10:55:08 2011] Spatial fit model total counts = 34.996400, observed total counts = 35.000000
[Fri Sep 23 10:55:08 2011] Offset between fit and detection position for source 3 = 0.616687 pixels
[Fri Sep 23 10:55:08 2011] 35.487030 total counts/ 7.326630 bgd. counts: snr = 10.403673
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.616687 pixels
  Position = (507.8, 527.1) = 17 1 10.33 -46 9 54.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 28.2 +/- 6.0
  Background counts = 7.3
  Rate = 0.0006 +/- 0.0001
[Fri Sep 23 10:55:08 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:55:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:55:08 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:55:08 2011] Source does appear to be extended
[Fri Sep 23 10:55:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:55:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:55:35 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Fri Sep 23 10:55:35 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.950
[Fri Sep 23 10:55:35 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.51"
[Fri Sep 23 10:55:38 2011] fullrun_ccd7_acisf10067_pi14-548_cl_pass1_src11.ximg exists
[Fri Sep 23 10:55:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10067_pi14-548_cl_pass1_src11.csv
[Fri Sep 23 10:55:38 2011] fullrun_ccd7_acisf10067_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Sep 23 10:55:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10067_pi14-548_cl_pass1_src11.csv
[Fri Sep 23 10:55:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10067_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10067_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 10:55:39 2011] fullrun_ccd7_acisf10067_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Sep 23 10:55:39 2011] fullrun_ccd7_acisf10067_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Sep 23 10:55:39 2011] Fit fullrun_ccd7_acisf10067_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Sep 23 10:55:52 2011] Spatial fit model total counts = 34.999100, observed total counts = 35.000000
[Fri Sep 23 10:55:52 2011] Offset between fit and detection position for source 3 = 0.004341 pixels
[Fri Sep 23 10:55:52 2011] 35.421310 total counts/ 7.158810 bgd. counts: snr = 10.563070
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.004341 pixels
  Position = (507.8, 527.2) = 17 1 10.33 -46 9 54.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 28.3 +/- 6.0
  Background counts = 7.2
  Rate = 0.0006 +/- 0.0001
[Fri Sep 23 10:55:52 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 10:55:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 10:55:52 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 10:55:52 2011] Source does appear to be extended
[Fri Sep 23 10:55:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:57:56 2011] Not overwriting source region fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3_src.reg
[Fri Sep 23 10:57:56 2011] Extracting stamp from image fullrun_ccd7_acisf10067_pi14-548_cl_sm2.00.img.gz, (484, 503) - (532, 551)
[Fri Sep 23 10:57:56 2011] Writing fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3.gif
[Fri Sep 23 10:58:42 2011] ../../acisf10067/products/events/fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3_src.evt and ../../acisf10067/products/events/fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Sep 23 10:58:42 2011] Size of ../../acisf10067/products/events/fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3_src.evt.gz[events] = 30 counts
[Fri Sep 23 10:58:42 2011] Mean chipx,y = (443.13, 329.73)
[Fri Sep 23 10:58:42 2011] Mean tdetx,y = (4360.13, 2031.73)
[Fri Sep 23 10:58:42 2011] chipx,y range = (428.00-464.00, 312.00-347.00)
[Fri Sep 23 10:58:43 2011] Size of ../../acisf10067/products/events/fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 27 counts
[Fri Sep 23 10:58:44 2011] ../../acisf10067/products/images/fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3_src.img and ../../acisf10067/products/images/fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Sep 23 10:58:44 2011] ../../acisf10067/products/spectra/fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3_src.pi and ../../acisf10067/products/spectra/fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Sep 23 10:58:44 2011] Not generating rmf since there are only 28 counts
[Fri Sep 23 10:58:47 2011] ../../acisf10067/products/lightcurves/fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3_src.lc and ../../acisf10067/products/lightcurves/fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Sep 23 11:00:51 2011] 229.744
[Fri Sep 23 11:00:56 2011] Updating aperture counts using extracted products
[Fri Sep 23 11:00:56 2011] Error reading totcts from fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Sep 23 11:00:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 11:00:56 2011] Using photon index=1.80, rate=0.000649, arf fullrun_ccd7_acisf10067_pi14-548_pass1_cl_src3.arf
[Fri Sep 23 11:00:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 11:00:56 2011] Updating source flux to 7.1e-15
[Fri Sep 23 11:01:21 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting