[Mon Oct 17 19:11:33 2011] Detection parameters:
  Position = (302.4, 846.9) = 17 1 11.07 -46 7 34.1
  Extent = 0.7" x 0.6", rotation angle = 116 degrees
  Source counts = 15.4 +/- 4.2
  Background counts = 2.6
  Rate = 0.0002 +/- 6e-05

[Mon Oct 17 19:11:34 2011] Off-axis axis estimate = 4.20'
[Mon Oct 17 19:12:42 2011] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:12:42 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Mon Oct 17 19:12:42 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.932
[Mon Oct 17 19:12:42 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 0.89"
[Mon Oct 17 19:12:44 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src26.ximg exists
[Mon Oct 17 19:12:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src26.csv
[Mon Oct 17 19:12:44 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src26_1.ximg exists
[Mon Oct 17 19:12:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src26.csv
[Mon Oct 17 19:12:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:12:45 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Mon Oct 17 19:12:45 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Oct 17 19:12:45 2011] Fit fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Mon Oct 17 19:12:57 2011] Spatial fit model total counts = 30.999700, observed total counts = 31.000000
[Mon Oct 17 19:12:57 2011] Offset between fit and detection position for source 40 = 2.136293 pixels
[Mon Oct 17 19:12:57 2011] 30.755120 total counts/ 8.559220 bgd. counts: snr = 7.586748
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 2.136293 pixels
  Position = (304.1, 848.3) = 17 1 11.02 -46 7 33.7
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 22.2 +/- 5.5
  Background counts = 8.6
  Rate = 0.0003 +/- 8e-05
[Mon Oct 17 19:12:57 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:12:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:12:57 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:12:57 2011] Source does appear to be extended
[Mon Oct 17 19:12:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:13:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:13:20 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Mon Oct 17 19:13:20 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.045
[Mon Oct 17 19:13:20 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.96"
[Mon Oct 17 19:13:21 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src26.ximg exists
[Mon Oct 17 19:13:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src26.csv
[Mon Oct 17 19:13:21 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src26_1.ximg exists
[Mon Oct 17 19:13:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src26.csv
[Mon Oct 17 19:13:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:13:23 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Mon Oct 17 19:13:23 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Oct 17 19:13:23 2011] Fit fullrun_ccd7_acisf10066_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Oct 17 19:13:34 2011] Spatial fit model total counts = 30.064400, observed total counts = 30.000000
[Mon Oct 17 19:13:34 2011] Offset between fit and detection position for source 40 = 0.064576 pixels
[Mon Oct 17 19:13:34 2011] 30.140470 total counts/ 7.018770 bgd. counts: snr = 8.727488
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.064576 pixels
  Position = (304.1, 848.3) = 17 1 11.01 -46 7 33.7
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 23.1 +/- 5.5
  Background counts = 7.0
  Rate = 0.0004 +/- 8e-05
[Mon Oct 17 19:13:34 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:13:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:13:34 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:13:34 2011] Source does appear to be extended
[Mon Oct 17 19:13:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:15:32 2011] Not overwriting source region fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40_src.reg
[Mon Oct 17 19:15:32 2011] Extracting stamp from image fullrun_ccd7_acisf10066_pi14-548_cl_sm2.00.img.gz, (258, 802) - (350, 894)
[Mon Oct 17 19:15:32 2011] Writing fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40.gif
[Mon Oct 17 19:16:45 2011] ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40_src.evt and ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40_bgd.evt exist, delete to re-create
[Mon Oct 17 19:16:45 2011] Size of ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40_src.evt.gz[events] = 27 counts
[Mon Oct 17 19:16:45 2011] Mean chipx,y = (502.44, 93.63)
[Mon Oct 17 19:16:45 2011] Mean tdetx,y = (4419.44, 1795.63)
[Mon Oct 17 19:16:45 2011] chipx,y range = (485.00-522.00, 75.00-111.00)
[Mon Oct 17 19:16:45 2011] Size of ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 109 counts
[Mon Oct 17 19:16:45 2011] ../../acisf10066/products/images/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40_src.img and ../../acisf10066/products/images/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40_bgd.img exist, delete to re-create
[Mon Oct 17 19:16:45 2011] ../../acisf10066/products/spectra/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40_src.pi and ../../acisf10066/products/spectra/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40_bgd.pi exist, delete to re-create
[Mon Oct 17 19:16:45 2011] Not generating rmf since there are only 23 counts
[Mon Oct 17 19:16:48 2011] ../../acisf10066/products/lightcurves/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40_src.lc and ../../acisf10066/products/lightcurves/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40_bgd.lc exist, delete to re-create
[Mon Oct 17 19:17:43 2011] 205.078
[Mon Oct 17 19:17:47 2011] Updating aperture counts using extracted products
[Mon Oct 17 19:17:47 2011] Error reading totcts from fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40_src.pi.gz
[Mon Oct 17 19:17:48 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 19:17:48 2011] Using photon index=1.80, rate=0.000353, arf fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src40.arf
[Mon Oct 17 19:17:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 19:17:48 2011] Updating source flux to 4.3e-15
[Mon Oct 17 19:18:06 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting