[Mon Oct 17 19:11:32 2011] Detection parameters:
  Position = (307.1, 518.6) = 17 1 10.86 -46 10 15.7
  Extent = 0.5" x 0.5", rotation angle = 93 degrees
  Source counts = 10.4 +/- 3.5
  Background counts = 1.6
  Rate = 0.0002 +/- 5e-05

[Mon Oct 17 19:11:34 2011] Off-axis axis estimate = 2.17'
[Mon Oct 17 19:12:42 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:12:42 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Oct 17 19:12:42 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.754
[Mon Oct 17 19:12:42 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 0.45"
[Mon Oct 17 19:12:44 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src37.ximg exists
[Mon Oct 17 19:12:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src37.csv
[Mon Oct 17 19:12:44 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src37_1.ximg exists
[Mon Oct 17 19:12:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src37.csv
[Mon Oct 17 19:12:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:12:45 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Mon Oct 17 19:12:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src37.csv
[Mon Oct 17 19:12:45 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Oct 17 19:12:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src37.csv
[Mon Oct 17 19:12:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:12:57 2011] Spatial fit model total counts = 11.732100, observed total counts = 15.000000
[Mon Oct 17 19:12:57 2011] Offset between fit and detection position for source 18 = 0.781580 pixels
[Mon Oct 17 19:12:57 2011] 10.829977 total counts/ 0.032877 bgd. counts: snr = 59.546886
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.781580 pixels
  Position = (307.5, 519.3) = 17 1 10.86 -46 10 15.6
  Extent = 0.5 (0.3-0.7)" x 0.2 (0.1-0.4)", rotation angle = 107 (87-125) degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.0
  Rate = 0.0002 +/- 5e-05
[Mon Oct 17 19:12:57 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:12:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:12:57 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:12:57 2011] Source does appear to be extended
[Mon Oct 17 19:12:57 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Mon Oct 17 19:13:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:13:20 2011] Initial guess for spatial extent in simple fitting = 0.34"
[Mon Oct 17 19:13:20 2011] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.060
[Mon Oct 17 19:13:20 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 0.34"
[Mon Oct 17 19:13:22 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src37.ximg exists
[Mon Oct 17 19:13:22 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src37_1.ximg exists
[Mon Oct 17 19:13:22 2011] Fit fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src37 appears to have run properly
[Mon Oct 17 19:13:23 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Mon Oct 17 19:13:23 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Oct 17 19:13:23 2011] Fit fullrun_ccd7_acisf10066_pi14-548_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Oct 17 19:13:34 2011] Spatial fit model total counts = 14.816600, observed total counts = 15.000000
[Mon Oct 17 19:13:34 2011] Offset between fit and detection position for source 18 = 0.058117 pixels
[Mon Oct 17 19:13:34 2011] 14.847970 total counts/ 4.132870 bgd. counts: snr = 5.270725
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.058117 pixels
  Position = (307.5, 519.3) = 17 1 10.86 -46 10 15.6
  Extent = 0.4 (0.3-0.6)" x 0.1 (0.1-0.2)", rotation angle = 97 (89-110) degrees
  Source counts = 10.7 +/- 3.9
  Background counts = 4.1
  Rate = 0.0002 +/- 6e-05
[Mon Oct 17 19:13:34 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:13:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:13:34 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:13:34 2011] Source does appear to be extended
[Mon Oct 17 19:13:34 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.68
[Mon Oct 17 19:13:34 2011] Source is asymmetric
[Mon Oct 17 19:15:32 2011] Not overwriting source region fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18_src.reg
[Mon Oct 17 19:15:32 2011] Extracting stamp from image fullrun_ccd7_acisf10066_pi14-548_cl_sm2.00.img.gz, (288, 500) - (327, 539)
[Mon Oct 17 19:15:32 2011] Writing fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18.gif
[Mon Oct 17 19:17:17 2011] ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18_src.evt and ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Mon Oct 17 19:17:17 2011] Size of ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18_src.evt.gz[events] = 11 counts
[Mon Oct 17 19:17:17 2011] Mean chipx,y = (204.09, 237.91)
[Mon Oct 17 19:17:17 2011] Mean tdetx,y = (4121.09, 1939.91)
[Mon Oct 17 19:17:17 2011] chipx,y range = (188.00-221.00, 219.00-252.00)
[Mon Oct 17 19:17:17 2011] Size of ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 8 counts
[Mon Oct 17 19:17:17 2011] ../../acisf10066/products/images/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18_src.img and ../../acisf10066/products/images/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Mon Oct 17 19:17:17 2011] ../../acisf10066/products/spectra/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18_src.pi and ../../acisf10066/products/spectra/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Mon Oct 17 19:17:17 2011] Not generating rmf since there are only 10 counts
[Mon Oct 17 19:17:20 2011] ../../acisf10066/products/lightcurves/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18_src.lc and ../../acisf10066/products/lightcurves/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Mon Oct 17 19:17:43 2011] 230.109
[Mon Oct 17 19:17:48 2011] Updating aperture counts using extracted products
[Mon Oct 17 19:17:48 2011] Error reading totcts from fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18_src.pi.gz
[Mon Oct 17 19:17:48 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 19:17:48 2011] Using photon index=1.80, rate=0.000164, arf fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src18.arf
[Mon Oct 17 19:17:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 19:17:48 2011] Updating source flux to 1.8e-15
[Mon Oct 17 19:18:06 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting