[Mon Oct 17 19:11:32 2011] Detection parameters:
  Position = (624.0, 352.2) = 17 0 55.85 -46 11 37.6
  Extent = 0.5" x 0.5", rotation angle = 138 degrees
  Source counts = 28.8 +/- 5.6
  Background counts = 2.2
  Rate = 0.0004 +/- 9e-05

[Mon Oct 17 19:11:34 2011] Off-axis axis estimate = 0.77'
[Mon Oct 17 19:12:42 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:12:42 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 17 19:12:42 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.613
[Mon Oct 17 19:12:42 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.38"
[Mon Oct 17 19:12:43 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src18.ximg exists
[Mon Oct 17 19:12:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src18.csv
[Mon Oct 17 19:12:43 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src18_1.ximg exists
[Mon Oct 17 19:12:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src18.csv
[Mon Oct 17 19:12:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:12:44 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Mon Oct 17 19:12:44 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Oct 17 19:12:44 2011] Fit fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Mon Oct 17 19:12:57 2011] Spatial fit model total counts = 40.003100, observed total counts = 40.000000
[Mon Oct 17 19:12:57 2011] Offset between fit and detection position for source 14 = 0.626526 pixels
[Mon Oct 17 19:12:57 2011] 40.594200 total counts/ 11.469700 bgd. counts: snr = 8.599683
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.626526 pixels
  Position = (624.5, 352.6) = 17 0 55.85 -46 11 37.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 29.1 +/- 6.4
  Background counts = 11.5
  Rate = 0.0004 +/- 0.0001
[Mon Oct 17 19:12:57 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:12:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:12:57 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:12:57 2011] Source does appear to be extended
[Mon Oct 17 19:12:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:13:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:13:20 2011] Initial guess for spatial extent in simple fitting = 0.37"
[Mon Oct 17 19:13:20 2011] source mask rpix=0.7, npix_max = 6, mask sum = 9, frac = 1.454
[Mon Oct 17 19:13:20 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.37"
[Mon Oct 17 19:13:21 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src18.ximg exists
[Mon Oct 17 19:13:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src18.csv
[Mon Oct 17 19:13:21 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src18_1.ximg exists
[Mon Oct 17 19:13:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src18.csv
[Mon Oct 17 19:13:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:13:22 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Mon Oct 17 19:13:22 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Oct 17 19:13:22 2011] Fit fullrun_ccd7_acisf10066_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Mon Oct 17 19:13:34 2011] Spatial fit model total counts = 40.001100, observed total counts = 40.000000
[Mon Oct 17 19:13:34 2011] Offset between fit and detection position for source 14 = 0.000161 pixels
[Mon Oct 17 19:13:34 2011] 40.592100 total counts/ 11.469000 bgd. counts: snr = 8.599532
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.000161 pixels
  Position = (624.5, 352.6) = 17 0 55.85 -46 11 37.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 29.1 +/- 6.4
  Background counts = 11.5
  Rate = 0.0004 +/- 0.0001
[Mon Oct 17 19:13:34 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:13:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:13:34 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:13:34 2011] Source does appear to be extended
[Mon Oct 17 19:13:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:15:32 2011] Not overwriting source region fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14_src.reg
[Mon Oct 17 19:15:32 2011] Extracting stamp from image fullrun_ccd7_acisf10066_pi14-548_cl_sm2.00.img.gz, (608, 336) - (641, 369)
[Mon Oct 17 19:15:32 2011] Writing fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14.gif
[Mon Oct 17 19:16:21 2011] ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14_src.evt and ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Mon Oct 17 19:16:21 2011] Size of ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14_src.evt.gz[events] = 30 counts
[Mon Oct 17 19:16:21 2011] Mean chipx,y = (186.47, 594.77)
[Mon Oct 17 19:16:21 2011] Mean tdetx,y = (4103.47, 2296.77)
[Mon Oct 17 19:16:21 2011] chipx,y range = (169.00-203.00, 578.00-612.00)
[Mon Oct 17 19:16:21 2011] Size of ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 14 counts
[Mon Oct 17 19:16:21 2011] ../../acisf10066/products/images/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14_src.img and ../../acisf10066/products/images/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Mon Oct 17 19:16:21 2011] ../../acisf10066/products/spectra/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14_src.pi and ../../acisf10066/products/spectra/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Mon Oct 17 19:16:21 2011] Not generating rmf since there are only 29 counts
[Mon Oct 17 19:16:24 2011] ../../acisf10066/products/lightcurves/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14_src.lc and ../../acisf10066/products/lightcurves/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Mon Oct 17 19:17:43 2011] 233.422
[Mon Oct 17 19:17:47 2011] Updating aperture counts using extracted products
[Mon Oct 17 19:17:47 2011] Error reading totcts from fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14_src.pi.gz
[Mon Oct 17 19:17:48 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 19:17:48 2011] Using photon index=1.80, rate=0.000445, arf fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src14.arf
[Mon Oct 17 19:17:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 19:17:48 2011] Updating source flux to 4.8e-15
[Mon Oct 17 19:18:06 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting