[Mon Oct 17 19:11:32 2011] Detection parameters:
  Position = (803.7, 265.5) = 17 0 47.33 -46 12 20.2
  Extent = 0.7" x 0.5", rotation angle = 66 degrees
  Source counts = 22.6 +/- 5.1
  Background counts = 3.4
  Rate = 0.0003 +/- 8e-05

[Mon Oct 17 19:11:34 2011] Off-axis axis estimate = 2.41'
[Mon Oct 17 19:12:42 2011] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:12:42 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Mon Oct 17 19:12:42 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.037
[Mon Oct 17 19:12:42 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 0.48"
[Mon Oct 17 19:12:43 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src23.ximg exists
[Mon Oct 17 19:12:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src23.csv
[Mon Oct 17 19:12:43 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src23_1.ximg exists
[Mon Oct 17 19:12:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src23.csv
[Mon Oct 17 19:12:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10066_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:12:45 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Mon Oct 17 19:12:45 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Oct 17 19:12:45 2011] Fit fullrun_ccd7_acisf10066_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Oct 17 19:12:57 2011] Spatial fit model total counts = 33.997900, observed total counts = 34.000000
[Mon Oct 17 19:12:57 2011] Offset between fit and detection position for source 10 = 0.086171 pixels
[Mon Oct 17 19:12:57 2011] 34.805600 total counts/ 16.577200 bgd. counts: snr = 4.477060
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.086171 pixels
  Position = (803.7, 265.4) = 17 0 47.35 -46 12 20.5
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 18.2 +/- 5.9
  Background counts = 16.6
  Rate = 0.0003 +/- 9e-05
[Mon Oct 17 19:12:57 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:12:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:12:57 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:12:57 2011] Source does appear to be extended
[Mon Oct 17 19:12:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:13:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:13:20 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 17 19:13:20 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.410
[Mon Oct 17 19:13:20 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.38"
[Mon Oct 17 19:13:21 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src23.ximg exists
[Mon Oct 17 19:13:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src23.csv
[Mon Oct 17 19:13:21 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src23_1.ximg exists
[Mon Oct 17 19:13:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src23.csv
[Mon Oct 17 19:13:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10066_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:13:23 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Mon Oct 17 19:13:23 2011] fullrun_ccd7_acisf10066_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Oct 17 19:13:23 2011] Fit fullrun_ccd7_acisf10066_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Mon Oct 17 19:13:34 2011] Spatial fit model total counts = 34.997800, observed total counts = 35.000000
[Mon Oct 17 19:13:34 2011] Offset between fit and detection position for source 10 = 0.001276 pixels
[Mon Oct 17 19:13:34 2011] 35.439400 total counts/ 17.208800 bgd. counts: snr = 4.394664
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.001276 pixels
  Position = (803.7, 265.4) = 17 0 47.35 -46 12 20.5
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 18.2 +/- 6.0
  Background counts = 17.2
  Rate = 0.0003 +/- 9e-05
[Mon Oct 17 19:13:34 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:13:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:13:34 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:13:34 2011] Source does appear to be extended
[Mon Oct 17 19:13:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:15:32 2011] Not overwriting source region fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10_src.reg
[Mon Oct 17 19:15:32 2011] Extracting stamp from image fullrun_ccd7_acisf10066_pi14-548_cl_sm2.00.img.gz, (787, 248) - (821, 282)
[Mon Oct 17 19:15:32 2011] Writing fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10.gif
[Mon Oct 17 19:16:34 2011] ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10_src.evt and ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Oct 17 19:16:34 2011] Size of ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10_src.evt.gz[events] = 20 counts
[Mon Oct 17 19:16:34 2011] Mean chipx,y = (183.80, 795.30)
[Mon Oct 17 19:16:34 2011] Mean tdetx,y = (4100.80, 2497.30)
[Mon Oct 17 19:16:34 2011] chipx,y range = (166.00-200.00, 776.00-810.00)
[Mon Oct 17 19:16:34 2011] Size of ../../acisf10066/products/events/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 19 counts
[Mon Oct 17 19:16:34 2011] ../../acisf10066/products/images/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10_src.img and ../../acisf10066/products/images/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Oct 17 19:16:34 2011] ../../acisf10066/products/spectra/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10_src.pi and ../../acisf10066/products/spectra/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Oct 17 19:16:34 2011] Not generating rmf since there are only 18 counts
[Mon Oct 17 19:16:37 2011] ../../acisf10066/products/lightcurves/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10_src.lc and ../../acisf10066/products/lightcurves/fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Oct 17 19:17:43 2011] 229.228
[Mon Oct 17 19:17:47 2011] Updating aperture counts using extracted products
[Mon Oct 17 19:17:47 2011] Error reading totcts from fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Oct 17 19:17:48 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 19:17:48 2011] Using photon index=1.80, rate=0.000279, arf fullrun_ccd7_acisf10066_pi14-548_pass1_cl_src10.arf
[Mon Oct 17 19:17:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 19:17:48 2011] Updating source flux to 3e-15
[Mon Oct 17 19:18:06 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting