[Mon Oct 17 19:11:31 2011] Detection parameters:
  Position = (1215.2, 918.9) = 17 0 48.24 -46 14 45.1
  Extent = 0.7" x 0.6", rotation angle = 118 degrees
  Source counts = 23.8 +/- 5.1
  Background counts = 2.2
  Rate = 0.0004 +/- 8e-05

[Mon Oct 17 19:11:31 2011] Off-axis axis estimate = 4.00'
[Mon Oct 17 19:12:41 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:12:41 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Mon Oct 17 19:12:41 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Mon Oct 17 19:12:41 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.83"
[Mon Oct 17 19:12:42 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src6.ximg exists
[Mon Oct 17 19:12:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src6.csv
[Mon Oct 17 19:12:42 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src6_1.ximg exists
[Mon Oct 17 19:12:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src6.csv
[Mon Oct 17 19:12:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:12:42 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Mon Oct 17 19:12:42 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Oct 17 19:12:42 2011] Fit fullrun_ccd6_acisf10066_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Oct 17 19:12:53 2011] Spatial fit model total counts = 26.550300, observed total counts = 27.000000
[Mon Oct 17 19:12:53 2011] Offset between fit and detection position for source 29 = 0.557263 pixels
[Mon Oct 17 19:12:53 2011] 26.919032 total counts/ 0.431032 bgd. counts: snr = 40.345436
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.557263 pixels
  Position = (1215.7, 919.3) = 17 0 48.25 -46 14 45.2
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 26.5 +/- 5.2
  Background counts = 0.4
  Rate = 0.0004 +/- 8e-05
[Mon Oct 17 19:12:53 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:12:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:12:53 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:12:53 2011] Source does appear to be extended
[Mon Oct 17 19:12:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:13:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:13:19 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Mon Oct 17 19:13:19 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.184
[Mon Oct 17 19:13:19 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.88"
[Mon Oct 17 19:13:19 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src6.ximg exists
[Mon Oct 17 19:13:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src6.csv
[Mon Oct 17 19:13:19 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src6_1.ximg exists
[Mon Oct 17 19:13:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src6.csv
[Mon Oct 17 19:13:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:13:20 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Mon Oct 17 19:13:20 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Oct 17 19:13:20 2011] Fit fullrun_ccd6_acisf10066_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Oct 17 19:13:30 2011] Spatial fit model total counts = 27.411500, observed total counts = 27.000000
[Mon Oct 17 19:13:30 2011] Offset between fit and detection position for source 29 = 0.046185 pixels
[Mon Oct 17 19:13:30 2011] 27.682740 total counts/ 0.008540 bgd. counts: snr = 299.463820
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.046185 pixels
  Position = (1215.7, 919.3) = 17 0 48.24 -46 14 45.2
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 27.7 +/- 5.3
  Background counts = 0.0
  Rate = 0.0004 +/- 8e-05
[Mon Oct 17 19:13:30 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:13:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:13:30 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:13:30 2011] Source does appear to be extended
[Mon Oct 17 19:13:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:14:34 2011] Not overwriting source region fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_src.reg
[Mon Oct 17 19:14:34 2011] Extracting stamp from image fullrun_ccd6_acisf10066_pi14-548_cl_sm2.00.img.gz, (1173, 877) - (1258, 962)
[Mon Oct 17 19:14:34 2011] Writing fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29.gif
[Mon Oct 17 19:14:49 2011] ../../acisf10066/products/events/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_src.evt and ../../acisf10066/products/events/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Mon Oct 17 19:14:49 2011] Size of ../../acisf10066/products/events/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_src.evt.gz[events] = 27 counts
[Mon Oct 17 19:14:49 2011] Mean chipx,y = (950.67, 900.44)
[Mon Oct 17 19:14:49 2011] Mean tdetx,y = (3825.67, 2602.44)
[Mon Oct 17 19:14:49 2011] chipx,y range = (933.00-970.00, 881.00-918.00)
[Mon Oct 17 19:14:49 2011] Size of ../../acisf10066/products/events/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 44 counts
[Mon Oct 17 19:14:49 2011] ../../acisf10066/products/images/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_src.img and ../../acisf10066/products/images/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Mon Oct 17 19:14:49 2011] ../../acisf10066/products/spectra/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_src.pi and ../../acisf10066/products/spectra/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Mon Oct 17 19:14:49 2011] Not generating rmf since there are only 27 counts
[Mon Oct 17 19:14:52 2011] ../../acisf10066/products/lightcurves/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_src.lc and ../../acisf10066/products/lightcurves/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Mon Oct 17 19:15:31 2011] 198.345
[Mon Oct 17 19:17:47 2011] Updating aperture counts using extracted products
[Mon Oct 17 19:17:47 2011] Error reading totcts from fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_src.pi.gz
[Mon Oct 17 19:17:47 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 19:17:47 2011] Using photon index=1.80, rate=0.000423, arf fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29.arf
[Mon Oct 17 19:17:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 19:17:47 2011] Updating source flux to 5.7e-15
[Mon Oct 17 19:18:05 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 17 19:18:06 2011] acisf10066/analysis//spectral/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete