[Mon Oct 17 19:11:30 2011] Detection parameters:
  Position = (632.5, 1181.1) = 17 1 15.87 -46 12 36.1
  Extent = 0.6" x 0.5", rotation angle = 90 degrees
  Source counts = 13.9 +/- 3.9
  Background counts = 1.1
  Rate = 0.0002 +/- 6e-05

[Mon Oct 17 19:11:31 2011] Off-axis axis estimate = 3.06'
[Mon Oct 17 19:12:41 2011] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:12:41 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Mon Oct 17 19:12:41 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.034
[Mon Oct 17 19:12:41 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.59"
[Mon Oct 17 19:12:42 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src13.ximg exists
[Mon Oct 17 19:12:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src13.csv
[Mon Oct 17 19:12:42 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Oct 17 19:12:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src13.csv
[Mon Oct 17 19:12:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:12:42 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Oct 17 19:12:42 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Oct 17 19:12:42 2011] Fit fullrun_ccd6_acisf10066_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Oct 17 19:12:53 2011] Spatial fit model total counts = 21.994800, observed total counts = 23.000000
[Mon Oct 17 19:12:53 2011] Offset between fit and detection position for source 11 = 0.542060 pixels
[Mon Oct 17 19:12:53 2011] 21.400280 total counts/ 1.406280 bgd. counts: snr = 16.860241
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.542060 pixels
  Position = (632.8, 1180.6) = 17 1 15.88 -46 12 36.6
  Extent = 0.9 (0.6-1.2)", rotation angle = 0
  Source counts = 20.0 +/- 4.6
  Background counts = 1.4
  Rate = 0.0003 +/- 7e-05
[Mon Oct 17 19:12:53 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:12:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:12:53 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:12:53 2011] Source does appear to be extended
[Mon Oct 17 19:12:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:13:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:13:19 2011] Initial guess for spatial extent in simple fitting = 0.86"
[Mon Oct 17 19:13:19 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.985
[Mon Oct 17 19:13:19 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.86"
[Mon Oct 17 19:13:19 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src13.ximg exists
[Mon Oct 17 19:13:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src13.csv
[Mon Oct 17 19:13:19 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src13_1.ximg exists
[Mon Oct 17 19:13:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src13.csv
[Mon Oct 17 19:13:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:13:20 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Mon Oct 17 19:13:20 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Oct 17 19:13:20 2011] Fit fullrun_ccd6_acisf10066_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Oct 17 19:13:30 2011] Spatial fit model total counts = 21.371200, observed total counts = 22.000000
[Mon Oct 17 19:13:30 2011] Offset between fit and detection position for source 11 = 0.039020 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.039020 pixels
  Position = (632.8, 1180.6) = 17 1 15.88 -46 12 36.6
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 21.3 +/- 4.6
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Mon Oct 17 19:13:30 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:13:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:13:30 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:13:30 2011] Source does appear to be extended
[Mon Oct 17 19:13:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:14:34 2011] Not overwriting source region fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_src.reg
[Mon Oct 17 19:14:34 2011] Extracting stamp from image fullrun_ccd6_acisf10066_pi14-548_cl_sm2.00.img.gz, (594, 1141) - (672, 1220)
[Mon Oct 17 19:14:34 2011] Writing fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11.gif
[Mon Oct 17 19:15:08 2011] ../../acisf10066/products/events/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_src.evt and ../../acisf10066/products/events/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Mon Oct 17 19:15:08 2011] Size of ../../acisf10066/products/events/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_src.evt.gz[events] = 22 counts
[Mon Oct 17 19:15:08 2011] Mean chipx,y = (942.41, 258.68)
[Mon Oct 17 19:15:08 2011] Mean tdetx,y = (3817.41, 1960.68)
[Mon Oct 17 19:15:08 2011] chipx,y range = (927.00-960.00, 241.00-277.00)
[Mon Oct 17 19:15:08 2011] Size of ../../acisf10066/products/events/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 32 counts
[Mon Oct 17 19:15:08 2011] ../../acisf10066/products/images/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_src.img and ../../acisf10066/products/images/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Mon Oct 17 19:15:08 2011] ../../acisf10066/products/spectra/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_src.pi and ../../acisf10066/products/spectra/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Mon Oct 17 19:15:08 2011] Not generating rmf since there are only 21 counts
[Mon Oct 17 19:15:11 2011] ../../acisf10066/products/lightcurves/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_src.lc and ../../acisf10066/products/lightcurves/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Mon Oct 17 19:15:31 2011] 203.662
[Mon Oct 17 19:17:47 2011] Updating aperture counts using extracted products
[Mon Oct 17 19:17:47 2011] Error reading totcts from fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_src.pi.gz
[Mon Oct 17 19:17:47 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 19:17:47 2011] Using photon index=1.80, rate=0.000326, arf fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11.arf
[Mon Oct 17 19:17:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 19:17:47 2011] Updating source flux to 4.3e-15
[Mon Oct 17 19:18:05 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 17 19:18:06 2011] acisf10066/analysis//spectral/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete