[Mon Oct 17 19:11:30 2011] Detection parameters:
  Position = (552.0, 375.5) = 17 1 19.73 -46 19 12.4
  Extent = 0.5" x 0.5", rotation angle = 63 degrees
  Source counts = 91.7 +/- 12.0
  Background counts = 51.3
  Rate = 0.001 +/- 0.0002

[Mon Oct 17 19:11:31 2011] Off-axis axis estimate = 8.62'
[Mon Oct 17 19:12:41 2011] Using EEF radius (= 3.28 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:12:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 19:12:41 2011] Initial guess for spatial extent in simple fitting = 3.28"
[Mon Oct 17 19:12:41 2011] source mask rpix=6.7, npix_max = 205, mask sum = 197, frac = 0.957
[Mon Oct 17 19:12:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.28"
[Mon Oct 17 19:12:42 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 17 19:12:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 19:12:42 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 17 19:12:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 19:12:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10066_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:12:42 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 17 19:12:42 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 17 19:12:42 2011] Fit fullrun_ccd6_acisf10066_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 17 19:12:53 2011] Spatial fit model total counts = 177.371000, observed total counts = 179.000000
[Mon Oct 17 19:12:53 2011] Offset between fit and detection position for source 1 = 1.096563 pixels
[Mon Oct 17 19:12:53 2011] 178.312000 total counts/ 84.976400 bgd. counts: snr = 10.125073
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.096563 pixels
  Position = (551.6, 376.5) = 17 1 19.77 -46 19 12.2
  Extent = 3.9 (3.2-4.9)", rotation angle = 0
  Source counts = 93.3 +/- 13.4
  Background counts = 85.0
  Rate = 0.001 +/- 0.0002
[Mon Oct 17 19:12:53 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:12:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:12:53 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:12:53 2011] Source does appear to be extended
[Mon Oct 17 19:12:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:13:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:13:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 19:13:19 2011] Initial guess for spatial extent in simple fitting = 3.90"
[Mon Oct 17 19:13:19 2011] source mask rpix=7.9, npix_max = 284, mask sum = 270, frac = 0.949
[Mon Oct 17 19:13:19 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.90"
[Mon Oct 17 19:13:19 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 17 19:13:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 19:13:19 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 17 19:13:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 19:13:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10066_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:13:19 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 17 19:13:19 2011] fullrun_ccd6_acisf10066_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 17 19:13:19 2011] Fit fullrun_ccd6_acisf10066_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 17 19:13:30 2011] Spatial fit model total counts = 222.029000, observed total counts = 224.000000
[Mon Oct 17 19:13:30 2011] Offset between fit and detection position for source 1 = 0.260092 pixels
[Mon Oct 17 19:13:30 2011] 222.859500 total counts/ 135.852000 bgd. counts: snr = 7.464894
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.260092 pixels
  Position = (551.6, 376.8) = 17 1 19.77 -46 19 12.0
  Extent = 3.8 (3.2-4.7)", rotation angle = 0
  Source counts = 87.0 +/- 14.9
  Background counts = 135.9
  Rate = 0.001 +/- 0.0002
[Mon Oct 17 19:13:30 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:13:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:13:30 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:13:30 2011] Source does appear to be extended
[Mon Oct 17 19:13:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:14:34 2011] Not overwriting source region fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 17 19:14:34 2011] Extracting stamp from image fullrun_ccd6_acisf10066_pi14-548_cl_sm2.00.img.gz, (377, 203) - (726, 551)
[Mon Oct 17 19:14:34 2011] Writing fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1.gif
[Mon Oct 17 19:14:35 2011] ../../acisf10066/products/events/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_src.evt and ../../acisf10066/products/events/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 17 19:14:35 2011] Size of ../../acisf10066/products/events/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_src.evt.gz[events] = 180 counts
[Mon Oct 17 19:14:35 2011] Mean chipx,y = (179.62, 522.87)
[Mon Oct 17 19:14:35 2011] Mean tdetx,y = (3054.62, 2224.87)
[Mon Oct 17 19:14:35 2011] chipx,y range = (137.00-225.00, 490.00-563.00)
[Mon Oct 17 19:14:35 2011] Size of ../../acisf10066/products/events/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 637 counts
[Mon Oct 17 19:14:35 2011] ../../acisf10066/products/images/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_src.img and ../../acisf10066/products/images/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 17 19:14:35 2011] ../../acisf10066/products/spectra/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_src.pi and ../../acisf10066/products/spectra/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 17 19:14:35 2011] Not generating rmf since there are only 87 counts
[Mon Oct 17 19:14:38 2011] ../../acisf10066/products/lightcurves/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_src.lc and ../../acisf10066/products/lightcurves/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 17 19:15:31 2011] 169.151
[Mon Oct 17 19:17:47 2011] Updating aperture counts using extracted products
[Mon Oct 17 19:17:47 2011] Error reading totcts from fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 17 19:17:47 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 19:17:47 2011] Using photon index=1.80, rate=0.00133, arf fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 19:17:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 19:17:47 2011] Updating source flux to 2e-14
[Mon Oct 17 19:18:05 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 17 19:18:06 2011] acisf10066/analysis//spectral/fullrun_ccd6_acisf10066_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete