[Mon Oct 17 19:11:29 2011] Detection parameters:
  Position = (363.4, 900.5) = 17 0 5.76 -46 10 17.9
  Extent = 2.4" x 1.9", rotation angle = 161 degrees
  Source counts = 82.2 +/- 10.9
  Background counts = 36.8
  Rate = 0.001 +/- 0.0002

[Mon Oct 17 19:11:29 2011] Off-axis axis estimate = 9.42'
[Mon Oct 17 19:12:40 2011] Using EEF radius (= 3.92 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:12:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 19:12:40 2011] Initial guess for spatial extent in simple fitting = 3.92"
[Mon Oct 17 19:12:40 2011] source mask rpix=8.0, npix_max = 287, mask sum = 289, frac = 1.005
[Mon Oct 17 19:12:40 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.92"
[Mon Oct 17 19:12:40 2011] fullrun_ccd3_acisf10066_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 17 19:12:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10066_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 19:12:40 2011] fullrun_ccd3_acisf10066_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 17 19:12:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10066_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 19:12:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10066_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10066_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:12:40 2011] fullrun_ccd3_acisf10066_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 17 19:12:41 2011] fullrun_ccd3_acisf10066_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 17 19:12:41 2011] Fit fullrun_ccd3_acisf10066_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 17 19:12:49 2011] Spatial fit model total counts = 163.000000, observed total counts = 163.000000
[Mon Oct 17 19:12:49 2011] Offset between fit and detection position for source 1 = 0.494248 pixels
[Mon Oct 17 19:12:49 2011] 162.932800 total counts/ 81.656400 bgd. counts: snr = 8.994341
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.494248 pixels
  Position = (363.8, 900.9) = 17 0 5.77 -46 10 18.0
  Extent = 3.2 (2.5-3.9)", rotation angle = 0
  Source counts = 81.3 +/- 12.8
  Background counts = 81.7
  Rate = 0.001 +/- 0.0002
[Mon Oct 17 19:12:49 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:12:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:12:49 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:12:49 2011] Source does appear to be extended
[Mon Oct 17 19:12:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:13:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:13:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 19:13:18 2011] Initial guess for spatial extent in simple fitting = 3.16"
[Mon Oct 17 19:13:18 2011] source mask rpix=6.4, npix_max = 191, mask sum = 196, frac = 1.025
[Mon Oct 17 19:13:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.16"
[Mon Oct 17 19:13:18 2011] fullrun_ccd3_acisf10066_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 17 19:13:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10066_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 19:13:18 2011] fullrun_ccd3_acisf10066_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 17 19:13:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10066_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 19:13:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10066_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10066_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:13:18 2011] fullrun_ccd3_acisf10066_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 17 19:13:18 2011] fullrun_ccd3_acisf10066_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 17 19:13:18 2011] Fit fullrun_ccd3_acisf10066_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 17 19:13:27 2011] Spatial fit model total counts = 138.000000, observed total counts = 138.000000
[Mon Oct 17 19:13:27 2011] Offset between fit and detection position for source 1 = 0.491691 pixels
[Mon Oct 17 19:13:27 2011] 138.266400 total counts/ 62.885800 bgd. counts: snr = 9.505682
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.491691 pixels
  Position = (363.3, 900.9) = 17 0 5.79 -46 10 18.0
  Extent = 3.0 (2.3-3.6)", rotation angle = 0
  Source counts = 75.4 +/- 11.8
  Background counts = 62.9
  Rate = 0.001 +/- 0.0002
[Mon Oct 17 19:13:27 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:13:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:13:27 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:13:27 2011] Source does appear to be extended
[Mon Oct 17 19:13:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:14:09 2011] Not overwriting source region fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 17 19:14:09 2011] Extracting stamp from image fullrun_ccd3_acisf10066_pi14-548_cl_sm2.00.img.gz, (227, 765) - (499, 1037)
[Mon Oct 17 19:14:09 2011] Writing fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1.gif
[Mon Oct 17 19:14:10 2011] ../../acisf10066/products/events/fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_src.evt and ../../acisf10066/products/events/fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 17 19:14:10 2011] Size of ../../acisf10066/products/events/fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_src.evt.gz[events] = 119 counts
[Mon Oct 17 19:14:10 2011] Mean chipx,y = (128.29, 436.92)
[Mon Oct 17 19:14:10 2011] Mean tdetx,y = (4695.08, 3189.29)
[Mon Oct 17 19:14:10 2011] chipx,y range = (92.00-155.00, 406.00-469.00)
[Mon Oct 17 19:14:10 2011] Size of ../../acisf10066/products/events/fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 407 counts
[Mon Oct 17 19:14:10 2011] ../../acisf10066/products/images/fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_src.img and ../../acisf10066/products/images/fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 17 19:14:10 2011] ../../acisf10066/products/spectra/fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_src.pi and ../../acisf10066/products/spectra/fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 17 19:14:10 2011] Not generating rmf since there are only 75 counts
[Mon Oct 17 19:14:13 2011] ../../acisf10066/products/lightcurves/fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_src.lc and ../../acisf10066/products/lightcurves/fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 17 19:14:24 2011] 167.494
[Mon Oct 17 19:17:47 2011] Updating aperture counts using extracted products
[Mon Oct 17 19:17:47 2011] Error reading totcts from fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 17 19:17:47 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 19:17:47 2011] Using photon index=1.80, rate=0.00115, arf fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 19:17:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 19:17:47 2011] Updating source flux to 1.8e-14
[Mon Oct 17 19:18:01 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 17 19:18:02 2011] acisf10066/analysis//spectral/fullrun_ccd3_acisf10066_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete