[Mon Oct 17 19:11:29 2011] Detection parameters:
  Position = (305.8, 743.6) = 17 0 28.49 -46 19 25.0
  Extent = 4.2" x 3.2", rotation angle = 158 degrees
  Source counts = 457.9 +/- 23.5
  Background counts = 94.1
  Rate = 0.007 +/- 0.0004

[Mon Oct 17 19:11:29 2011] Off-axis axis estimate = 9.76'
[Mon Oct 17 19:12:39 2011] Using EEF radius (= 4.22 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:12:39 2011] Initial guess for spatial extent in simple fitting = 4.22"
[Mon Oct 17 19:12:39 2011] source mask rpix=8.6, npix_max = 329, mask sum = 324, frac = 0.983
[Mon Oct 17 19:12:39 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 4.22"
[Mon Oct 17 19:12:40 2011] fullrun_ccd2_acisf10066_pi14-548_cl_pass0_src5.ximg exists
[Mon Oct 17 19:12:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10066_pi14-548_cl_pass0_src5.csv
[Mon Oct 17 19:12:40 2011] fullrun_ccd2_acisf10066_pi14-548_cl_pass0_src5_1.ximg exists
[Mon Oct 17 19:12:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10066_pi14-548_cl_pass0_src5.csv
[Mon Oct 17 19:12:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10066_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10066_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:12:40 2011] fullrun_ccd2_acisf10066_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Mon Oct 17 19:12:40 2011] fullrun_ccd2_acisf10066_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Oct 17 19:12:40 2011] Fit fullrun_ccd2_acisf10066_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Oct 17 19:12:49 2011] Spatial fit model total counts = 573.882000, observed total counts = 576.000000
[Mon Oct 17 19:12:49 2011] Offset between fit and detection position for source 6 = 0.522656 pixels
[Mon Oct 17 19:12:49 2011] 574.718000 total counts/ 123.091000 bgd. counts: snr = 40.706780
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.522656 pixels
  Position = (305.3, 743.4) = 17 0 28.53 -46 19 25.3
  Extent = 3.6 (3.4-3.9)", rotation angle = 0
  Source counts = 451.6 +/- 24.0
  Background counts = 123.1
  Rate = 0.007 +/- 0.0004
[Mon Oct 17 19:12:49 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:12:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:12:49 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:12:49 2011] Source does appear to be extended
[Mon Oct 17 19:12:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:13:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 19:13:16 2011] Initial guess for spatial extent in simple fitting = 3.62"
[Mon Oct 17 19:13:16 2011] source mask rpix=7.4, npix_max = 247, mask sum = 240, frac = 0.970
[Mon Oct 17 19:13:16 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 3.62"
[Mon Oct 17 19:13:17 2011] fullrun_ccd2_acisf10066_pi14-548_cl_pass1_src5.ximg exists
[Mon Oct 17 19:13:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10066_pi14-548_cl_pass1_src5.csv
[Mon Oct 17 19:13:17 2011] fullrun_ccd2_acisf10066_pi14-548_cl_pass1_src5_1.ximg exists
[Mon Oct 17 19:13:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10066_pi14-548_cl_pass1_src5.csv
[Mon Oct 17 19:13:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10066_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10066_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 19:13:17 2011] fullrun_ccd2_acisf10066_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Mon Oct 17 19:13:17 2011] fullrun_ccd2_acisf10066_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Oct 17 19:13:17 2011] Fit fullrun_ccd2_acisf10066_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Oct 17 19:13:26 2011] Spatial fit model total counts = 550.634000, observed total counts = 550.000000
[Mon Oct 17 19:13:26 2011] Offset between fit and detection position for source 6 = 0.154983 pixels
[Mon Oct 17 19:13:26 2011] 551.554000 total counts/ 109.075000 bgd. counts: snr = 42.367228
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.154983 pixels
  Position = (305.3, 743.3) = 17 0 28.53 -46 19 25.4
  Extent = 3.5 (3.2-3.9)", rotation angle = 0
  Source counts = 442.5 +/- 23.5
  Background counts = 109.1
  Rate = 0.007 +/- 0.0004
[Mon Oct 17 19:13:26 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 19:13:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 19:13:26 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 19:13:26 2011] Source does appear to be extended
[Mon Oct 17 19:13:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 19:13:51 2011] Not overwriting source region fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6_src.reg
[Mon Oct 17 19:13:51 2011] Extracting stamp from image fullrun_ccd2_acisf10066_pi14-548_cl_sm2.00.img.gz, (143, 581) - (467, 905)
[Mon Oct 17 19:13:51 2011] Writing fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6.gif
[Mon Oct 17 19:14:05 2011] ../../acisf10066/products/events/fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6_src.evt and ../../acisf10066/products/events/fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Mon Oct 17 19:14:05 2011] Size of ../../acisf10066/products/events/fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6_src.evt.gz[events] = 530 counts
[Mon Oct 17 19:14:05 2011] Mean chipx,y = (871.14, 415.56)
[Mon Oct 17 19:14:05 2011] Mean tdetx,y = (3476.56, 3214.86)
[Mon Oct 17 19:14:05 2011] chipx,y range = (831.00-914.00, 377.00-452.00)
[Mon Oct 17 19:14:05 2011] Size of ../../acisf10066/products/events/fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 549 counts
[Mon Oct 17 19:14:05 2011] ../../acisf10066/products/images/fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6_src.img and ../../acisf10066/products/images/fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Mon Oct 17 19:14:05 2011] ../../acisf10066/products/spectra/fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6_src.pi and ../../acisf10066/products/spectra/fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Mon Oct 17 19:14:08 2011] ../../acisf10066/products/lightcurves/fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6_src.lc and ../../acisf10066/products/lightcurves/fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Mon Oct 17 19:14:09 2011] Keeping rmf generated by specextract
[Mon Oct 17 19:14:09 2011] 155.21
[Mon Oct 17 19:17:46 2011] Updating aperture counts using extracted products
[Mon Oct 17 19:17:46 2011] Error reading totcts from fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6_src.pi.gz
[Mon Oct 17 19:17:47 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 19:17:47 2011] Using photon index=1.80, rate=0.00676, arf fullrun_ccd2_acisf10066_pi14-548_pass1_cl_src6.arf
[Mon Oct 17 19:17:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 19:17:47 2011] Updating source flux to 1.1e-13