[Tue Oct 18 03:04:32 2011] Detection parameters:
  Position = (850.4, 1100.3) = 17 0 40.44 -46 9 16.7
  Extent = 0.5" x 0.5", rotation angle = 114 degrees
  Source counts = 24.3 +/- 5.3
  Background counts = 3.7
  Rate = 0.0004 +/- 8e-05

[Tue Oct 18 03:04:33 2011] Off-axis axis estimate = 3.61'
[Tue Oct 18 03:05:39 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 03:05:39 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Tue Oct 18 03:05:39 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.035
[Tue Oct 18 03:05:39 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.72"
[Tue Oct 18 03:05:40 2011] fullrun_ccd7_acisf10065_pi14-548_cl_pass0_src17.ximg exists
[Tue Oct 18 03:05:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10065_pi14-548_cl_pass0_src17.csv
[Tue Oct 18 03:05:40 2011] fullrun_ccd7_acisf10065_pi14-548_cl_pass0_src17_1.ximg exists
[Tue Oct 18 03:05:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10065_pi14-548_cl_pass0_src17.csv
[Tue Oct 18 03:05:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10065_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10065_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 03:05:41 2011] fullrun_ccd7_acisf10065_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Tue Oct 18 03:05:41 2011] fullrun_ccd7_acisf10065_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Oct 18 03:05:41 2011] Fit fullrun_ccd7_acisf10065_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Oct 18 03:05:55 2011] Spatial fit model total counts = 35.309900, observed total counts = 36.000000
[Tue Oct 18 03:05:55 2011] Offset between fit and detection position for source 31 = 1.222002 pixels
[Tue Oct 18 03:05:55 2011] 35.588500 total counts/ 10.955700 bgd. counts: snr = 7.442069
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.222002 pixels
  Position = (851.4, 1099.6) = 17 0 40.42 -46 9 17.3
  Extent = 0.9 (0.3-1.2)", rotation angle = 0
  Source counts = 24.6 +/- 6.0
  Background counts = 11.0
  Rate = 0.0004 +/- 0.0001
[Tue Oct 18 03:05:55 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 03:05:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 03:05:55 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 03:05:55 2011] Source does appear to be extended
[Tue Oct 18 03:05:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 03:06:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 03:06:15 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Tue Oct 18 03:06:15 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.109
[Tue Oct 18 03:06:15 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.92"
[Tue Oct 18 03:06:16 2011] fullrun_ccd7_acisf10065_pi14-548_cl_pass1_src17.ximg exists
[Tue Oct 18 03:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10065_pi14-548_cl_pass1_src17.csv
[Tue Oct 18 03:06:16 2011] fullrun_ccd7_acisf10065_pi14-548_cl_pass1_src17_1.ximg exists
[Tue Oct 18 03:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10065_pi14-548_cl_pass1_src17.csv
[Tue Oct 18 03:06:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10065_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10065_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 03:06:16 2011] fullrun_ccd7_acisf10065_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Tue Oct 18 03:06:16 2011] fullrun_ccd7_acisf10065_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Oct 18 03:06:16 2011] Fit fullrun_ccd7_acisf10065_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Oct 18 03:06:29 2011] Spatial fit model total counts = 34.354700, observed total counts = 35.000000
[Tue Oct 18 03:06:29 2011] Offset between fit and detection position for source 31 = 0.085944 pixels
[Tue Oct 18 03:06:29 2011] 34.457500 total counts/ 10.924900 bgd. counts: snr = 7.119692
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.085944 pixels
  Position = (851.4, 1099.7) = 17 0 40.42 -46 9 17.3
  Extent = 0.9 (0.3-1.2)", rotation angle = 0
  Source counts = 23.5 +/- 5.9
  Background counts = 10.9
  Rate = 0.0004 +/- 9e-05
[Tue Oct 18 03:06:29 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 03:06:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 03:06:29 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 03:06:29 2011] Source does appear to be extended
[Tue Oct 18 03:06:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 03:08:36 2011] Not overwriting source region fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31_src.reg
[Tue Oct 18 03:08:36 2011] Extracting stamp from image fullrun_ccd7_acisf10065_pi14-548_cl_sm2.00.img.gz, (811, 1060) - (891, 1140)
[Tue Oct 18 03:08:36 2011] Writing fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31.gif
[Tue Oct 18 03:09:23 2011] ../../acisf10065/products/events/fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31_src.evt and ../../acisf10065/products/events/fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Tue Oct 18 03:09:23 2011] Size of ../../acisf10065/products/events/fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31_src.evt.gz[events] = 29 counts
[Tue Oct 18 03:09:23 2011] Mean chipx,y = (405.79, 118.83)
[Tue Oct 18 03:09:23 2011] Mean tdetx,y = (4322.79, 1820.83)
[Tue Oct 18 03:09:23 2011] chipx,y range = (389.00-426.00, 100.00-138.00)
[Tue Oct 18 03:09:23 2011] Size of ../../acisf10065/products/events/fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 68 counts
[Tue Oct 18 03:09:23 2011] ../../acisf10065/products/images/fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31_src.img and ../../acisf10065/products/images/fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Tue Oct 18 03:09:23 2011] ../../acisf10065/products/spectra/fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31_src.pi and ../../acisf10065/products/spectra/fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Tue Oct 18 03:09:23 2011] Not generating rmf since there are only 23 counts
[Tue Oct 18 03:09:25 2011] ../../acisf10065/products/lightcurves/fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31_src.lc and ../../acisf10065/products/lightcurves/fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Tue Oct 18 03:10:49 2011] 222.189
[Tue Oct 18 03:10:53 2011] Updating aperture counts using extracted products
[Tue Oct 18 03:10:53 2011] Error reading totcts from fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31_src.pi.gz
[Tue Oct 18 03:10:54 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 03:10:54 2011] Using photon index=1.80, rate=0.000378, arf fullrun_ccd7_acisf10065_pi14-548_pass1_cl_src31.arf
[Tue Oct 18 03:10:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 03:10:54 2011] Updating source flux to 4.3e-15
[Tue Oct 18 03:11:08 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting