[Tue Oct 18 03:04:30 2011] Detection parameters:
  Position = (470.5, 491.5) = 17 1 39.29 -46 9 28.1
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 39.3 +/- 6.9
  Background counts = 7.7
  Rate = 0.0006 +/- 0.0001

[Tue Oct 18 03:04:31 2011] Off-axis axis estimate = 7.09'
[Tue Oct 18 03:05:38 2011] Using EEF radius (= 2.23 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 03:05:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 03:05:38 2011] Initial guess for spatial extent in simple fitting = 2.23"
[Tue Oct 18 03:05:38 2011] source mask rpix=4.5, npix_max = 101, mask sum = 85, frac = 0.837
[Tue Oct 18 03:05:38 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 2.23"
[Tue Oct 18 03:05:39 2011] fullrun_ccd6_acisf10065_pi14-548_cl_pass0_src5.ximg exists
[Tue Oct 18 03:05:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10065_pi14-548_cl_pass0_src5.csv
[Tue Oct 18 03:05:39 2011] fullrun_ccd6_acisf10065_pi14-548_cl_pass0_src5_1.ximg exists
[Tue Oct 18 03:05:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10065_pi14-548_cl_pass0_src5.csv
[Tue Oct 18 03:05:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10065_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10065_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 03:05:39 2011] fullrun_ccd6_acisf10065_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Tue Oct 18 03:05:39 2011] fullrun_ccd6_acisf10065_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Oct 18 03:05:39 2011] Fit fullrun_ccd6_acisf10065_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Oct 18 03:05:49 2011] Spatial fit model total counts = 72.617100, observed total counts = 69.000000
[Tue Oct 18 03:05:49 2011] Offset between fit and detection position for source 3 = 1.405923 pixels
[Tue Oct 18 03:05:49 2011] 72.684700 total counts/ 27.281300 bgd. counts: snr = 8.692723
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.405923 pixels
  Position = (470.1, 492.9) = 17 1 39.34 -46 9 27.7
  Extent = 1.9 (1.2-3.1)", rotation angle = 0
  Source counts = 45.4 +/- 8.5
  Background counts = 27.3
  Rate = 0.0007 +/- 0.0001
[Tue Oct 18 03:05:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 03:05:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 03:05:49 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 03:05:49 2011] Source does appear to be extended
[Tue Oct 18 03:05:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 03:06:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 03:06:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 03:06:14 2011] Initial guess for spatial extent in simple fitting = 1.93"
[Tue Oct 18 03:06:14 2011] source mask rpix=3.9, npix_max = 78, mask sum = 57, frac = 0.730
[Tue Oct 18 03:06:14 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.93"
[Tue Oct 18 03:06:14 2011] fullrun_ccd6_acisf10065_pi14-548_cl_pass1_src5.ximg exists
[Tue Oct 18 03:06:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10065_pi14-548_cl_pass1_src5.csv
[Tue Oct 18 03:06:14 2011] fullrun_ccd6_acisf10065_pi14-548_cl_pass1_src5_1.ximg exists
[Tue Oct 18 03:06:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10065_pi14-548_cl_pass1_src5.csv
[Tue Oct 18 03:06:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10065_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10065_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 03:06:14 2011] fullrun_ccd6_acisf10065_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue Oct 18 03:06:14 2011] fullrun_ccd6_acisf10065_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Oct 18 03:06:14 2011] Fit fullrun_ccd6_acisf10065_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Oct 18 03:06:24 2011] Spatial fit model total counts = 62.329300, observed total counts = 61.000000
[Tue Oct 18 03:06:24 2011] Offset between fit and detection position for source 3 = 1.635144 pixels
[Tue Oct 18 03:06:24 2011] 59.627600 total counts/ 15.704400 bgd. counts: snr = 11.083663
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.635144 pixels
  Position = (471.2, 494.1) = 17 1 39.29 -46 9 27.1
  Extent = 1.7 (1.2-2.3)", rotation angle = 0
  Source counts = 43.9 +/- 7.7
  Background counts = 15.7
  Rate = 0.0007 +/- 0.0001
[Tue Oct 18 03:06:24 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 03:06:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 03:06:24 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 03:06:24 2011] Source does appear to be extended
[Tue Oct 18 03:06:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 03:07:19 2011] Not overwriting source region fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3_src.reg
[Tue Oct 18 03:07:19 2011] Extracting stamp from image fullrun_ccd6_acisf10065_pi14-548_cl_sm2.00.img.gz, (394, 417) - (549, 572)
[Tue Oct 18 03:07:19 2011] Writing fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3.gif
[Tue Oct 18 03:07:32 2011] ../../acisf10065/products/events/fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3_src.evt and ../../acisf10065/products/events/fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Oct 18 03:07:32 2011] Size of ../../acisf10065/products/events/fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3_src.evt.gz[events] = 65 counts
[Tue Oct 18 03:07:32 2011] Mean chipx,y = (434.86, 834.14)
[Tue Oct 18 03:07:32 2011] Mean tdetx,y = (3309.86, 2536.14)
[Tue Oct 18 03:07:32 2011] chipx,y range = (411.00-458.00, 805.00-862.00)
[Tue Oct 18 03:07:32 2011] Size of ../../acisf10065/products/events/fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 120 counts
[Tue Oct 18 03:07:32 2011] ../../acisf10065/products/images/fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3_src.img and ../../acisf10065/products/images/fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Oct 18 03:07:32 2011] ../../acisf10065/products/spectra/fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3_src.pi and ../../acisf10065/products/spectra/fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Oct 18 03:07:32 2011] Not generating rmf since there are only 43 counts
[Tue Oct 18 03:07:34 2011] ../../acisf10065/products/lightcurves/fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3_src.lc and ../../acisf10065/products/lightcurves/fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Oct 18 03:08:35 2011] 167.735
[Tue Oct 18 03:10:52 2011] Updating aperture counts using extracted products
[Tue Oct 18 03:10:52 2011] Error reading totcts from fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Oct 18 03:10:53 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 03:10:53 2011] Using photon index=1.80, rate=0.000705, arf fullrun_ccd6_acisf10065_pi14-548_pass1_cl_src3.arf
[Tue Oct 18 03:10:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 03:10:53 2011] Updating source flux to 1.1e-14
[Tue Oct 18 03:11:03 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting